300-535 Automating and Programming Cisco Service Provider Solutions (300-535 SPAUTO) Questions and Answers

It interacts with the top orchestration layer using the REST and NETCONF/YANG NB APIs.

It can be configured for high availability and cluster mode.

It performs monitoring based on several monitoring methods.

It manages transactions, validations, policies, workflows, VM state machines, and rollbacks.

It allows the NETCONF connection to the device to be gracefully closed without having to explicitly code this action.

It manages the running configuration of the device by comparing it to the new configuration applied using NETCONF.

The with statement tries to connect to the device using TCP port 830 first but also tries to connect via TCP port 22.

Use of the with statement catches any exceptions when trying to connect to a device using NETCONF.

print(swap1(d, b))

print(swap2(a, b))

print(swap1(b, d))

print(swap2(22, 44))

< exit-operation >

< close-activity >

< close-session >

< boot-app >

The emsd process is not running.

There are polling interval problems.

SNMP is not enabled.

There is no support for IOS XR 64-bit.

git init network-deploy.py

git add network-deploy.py

git merge network-deploy.py

git commit network-deploy.py

deployment of SR policies

int egration with Cisco XTC

what-if analysis

device manager

network controller

local address of the router on which it listens for PCEP

configured for the local peer for state synchronization

destination address of the router on which it listens for PCEP

configured for the remote peer for state synchronization

retrieves the system time

configures the system time

prints the uptime of the CRUDService

prints the system uptime

show service impact

commit dry-run outformat native

pseudo-commit

show dry-run output

It configures a Cisco IOS XR router with BGP AS65000 with two neighbors and redistributes OSPF into BGP.

It validates the BGP configuration on a Cisco IOS XR router, but it is a read-only module and cannot modify the configuration on the router.

It validates the BGP configuration on a Cisco IOS XE router, but it is a check mode-only network module and cannot modify the configuration on the router.

It configures a Cisco IOS router with BGP on AS500 and redistributes OSPF into BGP.

peer-sync ipv4 192.168.0.3

state ipv4 192.168.0.3

peer ipv4 192.168.0.3

state-sync ipv4 192.168.0.3

PySNMP

requests

ncclient

YANG

json