March Special Sale Limited Time 60% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: 713PS592

Note! The 5V0-22.21 Exam is no longer available. Get in touch with our Live Chat or email us for more information about the 5V0-22.23 Exam.

5V0-22.21 VMware vSAN Specialist Questions and Answers

Questions 4

A vSAN administrator notices that the VMware Skyline Health: Network Latency Check reports indicate that three hosts are noncompliant.

Which action should the vSAN administrator take?

Options:

A.

Place the non-compliant hosts into an isolated network partition.

B.

Rerun the VMware Skyline Health: vSAN Cluster Partition report.

C.

Check VMKNICs, uplinks, physical switches, and associated settings.

D.

Immediately reboot the non-compliant hosts.

Buy Now
Questions 5

Which solution provides disaster recovery orchestration for workloads on a vSAN stretched cluster to a third site?

Options:

A.

vRealize Automation

B.

vSphere Replication

C.

Site Recovery Manager

D.

Array-based Replication

Buy Now
Questions 6

A customer is running a number of compute-intensive application workloads on their existing 4-node vSAN cluster that has resulted in resource contention. To provide additional compute resources, the vSAN administrator has decided to deploy a new 4-node vSAN compute-only cluster so that a HCI Mesh can be configured.

Which three points would the vSAN administrator need to consider before using this configuration? (Choose three.)

Options:

A.

The storage policy must be based on the number of hosts within the client cluster.

B.

The storage policy is based on the total number of hosts across both client and server clusters.

C.

A storage policy of Erasure Coding with FTT=2 would be supported.

D.

A storage policy of Mirroring with FIT 1 would be supported.

E.

A storage policy of Erasure Coding with hi 1=1 would be supported.

F.

The storage policy must be based on the number of hosts within the server cluster.

Buy Now
Questions 7

A single capacity disk fails within a vSAN 7.0 U1 cluster running with a “compression-only” configuration enabled. The vSAN administrator must recognize the platform impact that has occurred and take steps to correct it.

Which action should the vSAN administrator take?

Options:

A.

The hardware failure will impact the entire disk group, so the vSAN administrator will need to remove and recreate the disk group following the replacement of the failed storage device.

B.

The hardware failure will stop the running workloads, so the vSAN administrator will need to disable the compression-only configuration, replace the failed capacity device, and then re-create the disk group.

C.

The hardware failure will impact all disk groups within the ESXi host, so the vSAN administrator will need to manually remove the ESXi node from the vSAN Cluster, replace the failed capacity device, and then re-create the disk group.

D.

The hardware failure will only impact the specific capacity disk, so the vSAN administrator will need to remove and replace the failed capacity device.

Buy Now
Questions 8

A vSphere administrator wants to use vSphere Lifecycle Manager (vLCM) to manage a vSAN cluster with one desired image. When creating the new cluster, the administrator chooses “Manage all hosts in the cluster with a single image”.

Which option is NOT available when setting up the cluster image?

Options:

A.

Import image from new host

B.

Import image from an existing host in the vCenter inventory

C.

Import baseline from vSphere Lifecycle Manager

D.

Compose a new image

Buy Now
Questions 9

A large enterprise has a main campus with two 8-Node vSAN 7.0 U1 clusters and 50 remote sites, each containing one 2-Node cluster. An administrator configures a vLCM desired image for lifecycle management, and vLCM had determined that all the clusters are in need of remediation.

How would vLCM enhance the remediation operation in this situation?

Options:

A.

The administrator can remediate all remote sites and the main campus concurrently.

B.

When the administrator selects remediate, vLCM will non-disruptively remediate one server at a time until all clusters are complete.

C.

The administrator should remediate the main campus using vSphere Update Manager (VUM) and the 50 remote sites using vLCM.

D.

vLCM cannot remediate the clusters concurrently, so the administrator must complete the sites one-by-one in a parallel manner.

Buy Now
Questions 10

A vSAN administrator, who has a cluster that has both compute-only and vSAN ReadyNodes, recently received a request to deploy a new application with higher storage performance requirements than what are currently available.

What are two ways the administrator can reconfigure the vSAN cluster to obtain this additional performance? (Choose two.)

Options:

A.

Add additional hosts, with capacity devices only, and then stream the cache from the other hosts.

B.

Add cache and capacity devices to the compute-only hosts.

C.

Add additional cache and capacity devices to the existing data nodes.

D.

Add additional compute-only hosts from the vSAN cluster.

E.

Add to the existing disk groups two cache devices and the eight capacity devices.

Buy Now
Questions 11

A vSAN administrator has a vSAN cluster that is using vSphere Lifecycle Manager (vLCM) to manage hypervisor, server drivers, and firmware. All hosts in the cluster are compliant according to the vLCM image.

A 10GB NIC on the servers is experiencing issues, the vSAN administrator determines a new network driver will resolve the problem. Unfortunately, the required NIC driver is a newer version compared to the driver provided by the most recent Vendor Addon.

Which action should the vSAN administrator take to ensure the latest network driver is installed on the NIC before remediation?

Options:

A.

Add an individual component to the vLCM image that has the updated NIC driver.

B.

Since server vendors release periodic server Vendor Addon updates, make sure the vLCM image is configured to use the most recent version of the vendor addon.

C.

Modify the vLCM image to omit the NIC Driver, and then manually update the servers with the required NIC driver.

D.

Remove the Vendor Addon from the vLCM image, and then manually install the network driver on the servers.

Buy Now
Questions 12

Which option, if any, is the default option to enable Maintenance Mode on a vSAN host?

Options:

A.

Ensure accessibility.

B.

No data migration.

C.

Full data migration.

D.

There is no default option. The administrator must select an option.

Buy Now
Questions 13

A vSAN administrator is tasked with changing the stripe width for a specific storage policy on a vSAN 7.0 GA cluster in order to improve performance, but the component distribution desired is across hosts, not just across a disk group.

Which action, if any, should the administrator take to complete this task?

Options:

A.

No action is needed.

B.

Upgrade vSAN to 7.0 Update 1.

C.

Enable vSAN Performance Services in order to increase the number of Stripes available across hosts.

D.

Change the default policy to force provisioning to spread components across hosts.

Buy Now
Questions 14

A vSAN administrator has been tasked with troubleshooting an application in a Hybrid vSAN environment. The application is I/O intensive, and the magnetic capacity devices may be playing a role in slow performance, so the administrator decides to take action to help resolve the problem.

Which action should the administrator take?

Options:

A.

Change the Default Storage Policy to have stripe width of 13.

B.

Modify the stripe width for the application on the advanced settings for the VM.

C.

Add more magnetic capacity devices in the affected host.

D.

Increase the stripe width based on the number of capacity devices within the disk group.

Buy Now
Questions 15

An Application Clustering Solution requires an in-guest attachable LUN which can be shared across two different VMs.

Which vSAN feature can meet this requirement?

Options:

A.

vSAN Data Persistence

B.

vSAN iSCSI Target Service

C.

vSAN HCI Mesh

D.

vSAN Datastore Sharing

Buy Now
Questions 16

What is the purpose of host rebuild reserve in vSAN?

Options:

A.

Reserves space in case of single host failure

B.

Allocated capacity for vCLS

C.

Reconfigures data components

D.

Stores vSphere HA heartbeats

Buy Now
Questions 17

A vSAN administrator has three available racks and six vSAN hosts and needs to protect against a rack failure while maximizing resources.

Which two strategies should the vSAN administrator use to achieve this goal? (Choose two.)

Options:

A.

RAID-5/FTT=1

B.

vSAN stretched cluster

C.

Specify fault domains

D.

RAID-6/FTT=2

E.

2-node configuration

Buy Now
Questions 18

An organization wants to configure a new storage policy based on the following requirements:

  • Failures to tolerate = FTT 1/RAID-5 (Erasure Coding)
  • Number of disk stripes per object = 8
  • IOPS limit for object = 0
  • Object Space Reservation = Thin provisioning
  • Flash read cache reservation = 0%
  • Disable object checksum = No
  • Force provisioning = No

The administrator creates the policy using storage policy based management and assigns it to a 100GB virtual machine on a 4-node vSAN cluster to test the results of the new storage policy.

How many components will be created per host for the storage objects of the virtual machine on the vSAN datastore?

Options:

A.

2

B.

1

C.

8

D.

32

Buy Now
Questions 19

A vSAN administrator observes that the VMware Skyline Health: Time Synchronization displays one host that is noncompliant.

What is the meaning of this message?

Options:

A.

The vSAN administrator must review the NTP server configuration on vCenter Server and the ESXi hosts.

B.

The vSAN administrator must put the noncompliant host into maintenance mode.

C.

The value of the CLOMRepairDelay parameter is incorrect.

D.

The noncompliant host cannot communicate with vCenter.

Buy Now
Questions 20

The administrator has successfully deployed a vSAN Stretched Cluster and needs to ensure that any virtual machines that are created are placed in the appropriate site.

Which two steps are needed to complete this task? (Choose two.)

Options:

A.

Put the VMs in a vSphere DRS group.

B.

Create a storage policy that includes site affinity rules and apply to VMs.

C.

Create a single VM/Host group across both sites.

D.

Create VM/Host groups for the two sites.

E.

Put the VMs in the correct VM group.

Buy Now
Questions 21

Which tool should be used to identify vSAN unassociated objects?

Options:

A.

vSphere Host Client

B.

vSphere CLI

C.

vsantop

D.

PowerCLI

Buy Now
Questions 22

What is the default health check interval for the vSAN Health services?

Options:

A.

Every 60 minutes

B.

Every 24 hours

C.

Every 10 seconds

D.

Every 10 minutes

Buy Now
Exam Code: 5V0-22.21
Exam Name: VMware vSAN Specialist
Last Update: Feb 21, 2024
Questions: 149