Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65

648-238 Implementing Cisco Connected Physical Security 1 Questions and Answers

Questions 4

When troubleshooting camera issues, which technology allows you to find the IP address of a Cisco IP camera from the Cisco switch it is connected to?

Options:

A.

DHCP

B.

SNMP

C.

CDP

D.

medianet

Buy Now
Questions 5

Why would a Cisco IP camera show clear, but black and white, video images?

Options:

A.

The IR cut filter is in place.

B.

The camera is not streaming the color data.

C.

The camera has switched to night mode.

D.

The camera is not getting enough power.

Buy Now
Questions 6

Which Cisco Video Surveillance IP cameras can be configured as an indoor, vandal-resistant camera, without the use of a third-party external enclosure?

Options:

A.

CIVS-IPC-3520

B.

CIVS-IPC-3530

C.

CIVS-IPC-4500E

D.

CIVS-IPC-6000P

Buy Now
Questions 7

Which three statements about the Cisco 4- and 8-channel standalone encoder are true?

Options:

A.

They both support dual streaming on all ports.

B.

They both support motion detection.

C.

They both support simultaneous video and audio.

D.

They both support H.264 compression.

Buy Now
Questions 8

Refer to the exhibit.

648-238 Question 8

You have installed a Cisco 4500E IP camera to monitor the area of interest near the center of an outdoor courtyard area 24 hours a day. Which three actions help to focus in on the area of interest and improve overall image quality? (Choose three.)

Options:

A.

Use a wider angle lens to increase field of view.

B.

Enable Day/Night mode on the camera.

C.

Reposition the camera to minimize exposure of the sky.

D.

Avoid placing the camera near trees and other objects that could obstruct the view.

E.

Enable PTZ functionality to focus on the area of interest.

Buy Now
Questions 9

Per Cisco best practices, how should you bulk upgrade the firmware of the multiple Cisco IP cameras that are deployed in a Cisco VSM system?

Options:

A.

via the web interface of each camera only

B.

via Cisco VSOM - System Settings - System

C.

via Cisco VSMC - Maintenance - Server Upgrade

D.

via Cisco VSMC - Maintenance - Manage Drivers

Buy Now
Questions 10

Which of the following can affect the performance of the workstation that is used to display multiple panes of surveillance video?

Options:

A.

CPU and memory only

B.

Bus speed only

C.

Graphics card capabilities only

D.

CPU, memory, bus speed, and graphics card capabilities can affect workstation performance.

E.

CPU, memory, bus speed, and graphics card capabilities will not affect workstation performance.

Buy Now
Questions 11

Which of the following product families is a building block for a Cisco Borderless Network Architecture, designed specifically for branch deployments, and is capable of simultaneous LAN and WAN connectivity, security, mobility, voice, video, and customized applications such as Cisco Video Surveillance on a single platform?

Options:

A.

Cisco UCS

B.

Cisco Catalyst 3750-X Series Multilayer Switches

C.

Cisco 2600/3700 Series Multiservice Routers

D.

Cisco 2900/3900 Series Integrated Services Routers

E.

Cisco Wide Area Application Services

Buy Now
Questions 12

Which of the following Cisco products can natively pull video streams and camera hierarchy from the Cisco Video Surveillance system?

Options:

A.

Cisco Works

B.

Cisco Physical Access Manager

C.

Cisco Prime

D.

Cisco UCS Manager

Buy Now
Questions 13

What does it mean when the video from a camera is black and white, but otherwise the picture is clear?

Options:

A.

The IR cut filter is in place

B.

The camera is not streaming the color data

C.

The camera has switched to night mode

D.

The camera is not getting enough power

Buy Now
Questions 14

Refer to the exhibit.

648-238 Question 14

Which statement can be determined from the output shown?

Options:

A.

This is the output from the show power inline command.

B.

The connected device is an 802.af class 2 PoE camera.

C.

The switch management IP address is 10.10.10.202.

D.

The PoE device is connected to switch port 7.

Buy Now
Questions 15

What is the Cisco video architecture and technology that is embedded into Cisco IP cameras and can simplify deployment of video surveillance, save time, and reduce network configuration errors?

Options:

A.

Videoscape

B.

Medianet

C.

Cisco Discovery Protocol

D.

Media Experience Engine

Buy Now
Questions 16

When configuring the privilege level on a Cisco IP camera, which of the following is not a valid option?

Options:

A.

Administrator

B.

User

C.

Monitor

D.

Viewer

Buy Now
Questions 17

Which two OS + browser combinations are supported for viewing video using Cisco SASD? (Choose two.)

Options:

A.

Windows XP SP3 + Internet Explorer 8 (32- or 64-bit)

B.

Windows 7 (32-bit) + Internet Explorer 8 (32-bit)

C.

Windows 7 (32-bit) + Internet Explorer 9 (64-bit)

D.

Windows 7 (64-bit) + Internet Explorer 8 (32-bit)

E.

Windows 7 (64-bit) + Internet Explorer 9 (32-bit)

Buy Now
Questions 18

Which two options are workstation requirements for Cisco VSM 7.x? (Choose two.)

Options:

A.

Microsoft Internet Explorer 8 (64-bit)

B.

Microsoft .NET Framework 4.0

C.

Microsoft DirectX 11.0 or higher

D.

Microsoft Windows 7 Enterprise (64-bit)

E.

Microsoft Internet Explorer 8 (32-bit)

Buy Now
Questions 19

The headquarters of a California regional bank wants to deploy a redundant IP video surveillance solution using Cisco VSM 7. The IT manager is asking for a redundant video storage solution, however, with minimal infrastructure cost. How should a Cisco VSM 7 redundancy be designed for this scenario?

Options:

A.

An IT engineer can define a cluster of Cisco VSMS servers, which all fall back to a backup Cisco VSMS server if any should fail.

B.

For redundancy, each media server needs to be doubled and servers then operate in load balancing fashion.

C.

VSM 7 can record the primary stream of each camera on Cisco media server (either MSP or virtual machine), and the secondary stream can be recorded to NAS storage for a cost-effective solution.

D.

Cisco VSM 7 does not support redundancy for Cisco VSOM and Cisco VSMS.

Buy Now
Questions 20

What are the different view options in SASD?

Options:

A.

Alert Centric view, Map Centric view, Camera Centric view, Video Centric view

B.

Map Centric view, Camera Centric view, Alarm Centric view

C.

Map Centric view, Camera Centric view, Alarm Centric view, Event Centric view

D.

SASD views are fully customizable and as such there is no predefined viewing option.

Buy Now
Questions 21

In VSM 6.3.2, what is the maximum number of video panes that can be displayed at any given time in the VSOM Operators View?

Options:

A.

4

B.

8

C.

16

D.

32

Buy Now
Questions 22

On the Operator page, which of the following view option check boxes are not available to a user that was created in VSOM?

Options:

A.

Title Bars

B.

Video Tools

C.

Reduced View

D.

Full Source

Buy Now
Questions 23

Which core component of the Cisco Video Surveillance solution is responsible for distribution, archiving, and storage of video feeds?

Options:

A.

Cisco VSOM

B.

Cisco SASD

C.

Cisco VSMS

D.

Cisco PSOM

Buy Now
Questions 24

In Cisco VSM 7.0.1 (or higher), what is the maximum number of video panes that can be displayed at any given time in the VSOM Monitor Video tab?

Options:

A.

1

B.

4

C.

16

D.

32

Buy Now
Questions 25

In Cisco VSM 7, how should you configure a camera for dual-stream operations?

Options:

A.

Configure the primary stream in Cisco VSOM and configure the secondary stream directly on the camera.

B.

Configure the primary and secondary streams directly on the camera first before adding the camera to Cisco VSOM.

C.

Configure both primary and secondary stream in a template.

D.

It does not matter; streams can be configured on Cisco VSOM or on the camera.

Buy Now
Questions 26

When adding a backup media server to VSOM, which of the following options is not correct?

Options:

A.

Backup media server can back up archives from multiple media servers

B.

Camera recordings can be selectively backed up

C.

Either full recording or events from the past 24 hours can be backed up on a daily basis

D.

Backups can be scheduled to occur in the future, for example, after one week or one month

Buy Now
Questions 27

When setting up a dual stream configuration, you should do which of the following?

Options:

A.

Configure the primary stream in VSOM and configure the secondary stream directly on the camera.

B.

Configure the primary and secondary streams directly on the camera first before adding the camera to VSOM.

C.

Configure both the primary and secondary streams from VSOM.

D.

It does not matter, since streams can be configured on VSOM or on the camera.

Buy Now
Questions 28

Which two of the following Cisco Physical Security MSP servers support an optional secondary power supply? (Choose two.)

Options:

A.

CPS-MSP-1RU-K9

B.

CPS-MSP-2RU-K9

C.

CPS-MSP-4RU

D.

CPS-SS-4RU

E.

CIAC-PAME-1125-K9

Buy Now
Questions 29

Which of the following must be considered when calculating storage and retention on a Cisco Physical Security MSP server?

Options:

A.

Number of cameras, frame rates, camera distances, and record on motion requirements

B.

Number of cameras, frame rates, and server locations

C.

Number of cameras, frame rates, compression types, and record on motion requirements

D.

Number of cameras, camera distances, server locations, and compression types

Buy Now
Questions 30

You have been called to troubleshoot a network connectivity issue with a new Cisco VSM deployment. You are unable to ping the network gateway from the MSP server. Using the ifconfig command, you notice there are multiple network interfaces configured on the operating system. Which one of these network interfaces does the MSP server use in order to connect to the network gateway?

Options:

A.

LAN0

B.

NIC1

C.

Gigabit 0/1

D.

ETH0

Buy Now
Questions 31

Upon power on, the CPS-MSP-2RU-K9 server starts beeping and continues to do so, even if the server seems to be operational. What is the probable cause of this issue?

Options:

A.

The clock battery in the server is empty and needs to be replaced

B.

One of the fans in the power supply has failed

C.

The incoming power voltage into the power supply is too low or too high

D.

One of the hard disk drives has failed and needs to be replaced

Buy Now
Questions 32

On a VSMS server, what is YaST used for?

Options:

A.

To check the status of the RAID storage

B.

To configure the network settings

C.

To monitor the network performance

D.

To troubleshoot video stream errors

Buy Now
Questions 33

Which option lists the usable capacity on a Cisco MSP server from greatest to least?

Options:

A.

2RU (12 x 2TB), 2RU (6 x 2TB), 2RU (12 x 1TB), 2RU (6 x 1TB)

B.

2RU (12 x 2TB), 2RU (12 x 1TB), 2RU (6 x 2TB), 2RU (6 x 1TB)

C.

2RU (6 x 1TB), 2RU (6 x 2TB), 2RU (12 x 1TB), 2RU (12 x 2TB)

D.

2RU (6 x 1TB), 2RU (12 x 1TB), 2RU (6 x 2TB), 2RU (12 x 2TB)

Buy Now
Questions 34

How can video storage requirements be calculated?

Options:

A.

Camera count x bit rate x days recording

B.

Bit rate x frames per second x days recording

C.

Frames per second x codec x camera count

D.

Camera count x bit rate x hard drive capacity

Buy Now
Questions 35

When an installation of VSM is complete, what is the Cisco recommendation and best practice for the final step that should be taken?

Options:

A.

Create a configuration backup on the same server

B.

Create a backup in a location other than the server

C.

Delete any batch administration files left over from the installation

D.

Stop and restart each archive

Buy Now
Questions 36

Which three server platforms for Cisco Physical Security have built-in support for redundant power supplies? (Choose three.)

Options:

A.

Cisco UCS C-Series

B.

Cisco UCS B-Series

C.

Cisco UCS E-Series

D.

Cisco UCS Express / SRE 9xx

E.

Cisco CPS-MSP-2RU-K9

Buy Now
Questions 37

In addition to bandwidth, which factors should be considered when designing an IP network capable of delivering high-quality surveillance video in real time?

Options:

A.

minimize jitter and maximize latency

B.

minimize latency and maximize jitter

C.

minimize both jitter and latency

D.

maximize both jitter and latency

Buy Now
Questions 38

On a converged network infrastructure, which Layer 2 technology can be easily enabled and configured to ensure separation of video surveillance traffic on the network from other sources (for example, voice, email, and web browsing)?

Options:

A.

IP routing

B.

firewall

C.

QoS

D.

VLAN

Buy Now
Questions 39

What is the correct camera and lens setup for the use of IR lighting?

Options:

A.

Color camera with IR corrected lens

B.

A camera with day/night mode and IR corrected lens

C.

A camera with day/night mode and varifocal lens

D.

Color camera with varifocal lens

Buy Now
Questions 40

Which two statements about differences between HD or full HD and megapixel cameras are true? (Choose two.)

Options:

A.

Aspect ratio of full HD and megapixel cameras is the same.

B.

Resolution of full HD cameras is known, whereas megapixel cameras can vary.

C.

Megapixel cameras generally have higher frame rate than full HD cameras.

D.

Megapixel camera resolutions are common among different camera vendors.

E.

Megapixel cameras can have higher resolution than full HD cameras.

Buy Now
Questions 41

Order the following resolutions, by pixel count, from lowest to highest.

Options:

A.

D1, HD, QCIF, CIF

B.

D1, CIF, 4CIF, HD

C.

QCIF, CIF, D1, HD

D.

QCIF, D1, CIF, HD

Buy Now
Questions 42

Which camera and lens setup is correct to use IR lighting?

Options:

A.

color camera with IR corrected lens

B.

a camera with day/night mode and IR corrected lens

C.

a camera with day/night mode and varifocal lens

D.

color camera with varifocal lens

Buy Now
Questions 43

Where should outdoor surveillance cameras be mounted when nearby sources of light are present?

Options:

A.

The camera should be mounted lower than the light source.

B.

The camera should be mounted in parallel with the nearest light source.

C.

The camera should be mounted above the light source.

D.

Location does not matter, as long as the camera is day/night capable.

Buy Now
Questions 44

What are the two differences between interlaced and progressive scan video? (Choose two.)

Options:

A.

Progressive scan video is generally better with fast-moving objects

B.

Interlaced video is generally better with fast-moving objects

C.

Interlaced video is constructed out of alternating odd and even lines

D.

Progressive scan video is constructed out of alternating odd and even lines

Buy Now
Questions 45

Which switch port capability is recommended for an MSP server?

Options:

A.

Server switch ports should have 10/100 Mb capability

B.

Server switch ports should have 1000 Mb capability

C.

Server switch ports should have 10 Gb capability

D.

Servers should be connected to PoE-capable switches

Buy Now
Exam Code: 648-238
Exam Name: Implementing Cisco Connected Physical Security 1
Last Update: Apr 30, 2026
Questions: 152

PDF + Testing Engine

$65.27  $186.49

Testing Engine

$52.32  $149.49
buy now 648-238 testing engine

PDF (Q&A)

$48.12  $137.49
buy now 648-238 pdf