Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65

  1. Home
  2. Cisco
  3. Wireless LAN
  4. 648-247
  5. Implementing Cisco Connected Physical Security 2 Exam Questions and Answers

648-247 Implementing Cisco Connected Physical Security 2 Exam Questions and Answers

Questions 4

Which devices does Cisco manufacture and sell?

Options:

A.

readers, locks, and door position switches

B.

locks, doors, and door hardware

C.

cards, card printers, and readers

D.

Cisco does not manufacture or sell readers, locks, door hardware, or card printers

Buy Now
Questions 5

648-247 Question 5

Options:

Buy Now
Questions 6

When a 24 VDC fail safe lock is being used to secure a door, how should power be supplied to the lock from the control source?

Options:

A.

connected +24 VDC directly to the lock

B.

connected +24 VDC through common and normally close

C.

connected +24 VDC through common and normally open

D.

connected +5 VDC binary control signaling

Buy Now
Questions 7

Refer to the exhibit.

648-247 Question 7

One or more expansion modules is connected to the Cisco Access Gateway via a CAN bus. How should the CAN bus wires be connected after the last module in the chain?

Options:

A.

The CAN bus wires should be looped back to the Cisco Access Gateway.

B.

The CAN bus wires should be twisted together and tucked away.

C.

The CAN bus wires should be plugged into a Layer 2 Ethernet switch.

D.

The CAN bus wires should be terminated with a high-impedance resistor.

Buy Now
Questions 8

What are the three common methods that are used for authentication with an access control system?

Options:

A.

badge card, key fob, and keypad PIN

B.

badge card, keypad PIN, and password

C.

something you know, something you have, and something you are

D.

something you know, something you have, and something you did

Buy Now
Questions 9

A Cisco Access Gateway is not getting autodiscovered by the Cisco PAM Server. Which two of the following actions are not possible resolutions for this issue? (Choose two.)

Options:

A.

Enable SSL on both the Cisco Access Gateway and Cisco PAM Server.

B.

Disable SSL on both the Cisco Access Gateway and Cisco PAM Server.

C.

Configure DHCP and put the Cisco Access Gateway and Cisco PAM Server in the same Layer 2 network.

D.

For Cisco Access Gateways and Cisco PAM Servers that are in the same time zone physically, configure the same time zone names on the Cisco Access Gateway and Cisco PAM Server and use NTP.

E.

Configure DNS to resolve IP and hostname translation issues.

Buy Now
Questions 10

Is it possible to create a function that does not normally exist in the Cisco PAM by using log codes?

Options:

A.

No, this is not possible

B.

Yes, by creating a global I/O and configuring associations with log codes

C.

Yes, by URL triggers to update the log codes

D.

Yes, by using built-in device I/O rules

Buy Now
Questions 11

In Cisco PAM, " Relock time interval (sec), " " Door lock on close, " and " Server access timeout(s) " are examples of which?

Options:

A.

door template properties

B.

location properties

C.

logical door properties

D.

access policies

Buy Now
Questions 12

The primary Cisco PAM Server in a high-availability deployment is licensed for 128 modules, Badge Designer, and EDI integration. Which license(s) needs to be configured for the secondary Cisco PAM Server in this high-availability deployment?

Options:

A.

No additional licenses are needed as long as the hardware and software versions are identical between the primary and secondary Cisco PAM Servers.

B.

The secondary Cisco PAM Server needs the high-availability license only.

C.

The secondary Cisco PAM Server needs the high-availability license in addition to the same feature licenses: 128 modules license, Badge Designer license, and EDI integration license.

D.

None of the above—high availability is not currently available in Cisco PAM.

Buy Now
Questions 13

How should NTP be implemented in a Cisco Physical Access Control Gateway design?

Options:

A.

NTP is not required.

B.

NTP should be configured for the Cisco PAM Server only.

C.

NTP should be configured for Cisco Physical Access Control Gateways only.

D.

NTP should be configured on Cisco PAM Servers and gateways.

Buy Now
Questions 14

You need to design a 31-door, networked Cisco Physical Access Control Gateway system. Each door will be controlled by a Cisco Access Gateway, and each Cisco Access Gateway will require its own IP address. Due to the limited number of available IP addresses, the network admin has decided to implement variable-length subnet mask (VLSM) in order to better allocate the available address space. What is the most efficient subnet mask that can be used to handle the 31 IP addresses that are needed for the Cisco Access Gateways?

Options:

A.

255.255.255.128 : /25

B.

255.255.255.192 : /26

C.

255.255.255.224 : /27

D.

255.255.255.240 : /28

Buy Now
Questions 15

On a converged network infrastructure, which Layer 2 technology can be easily enabled and configured to ensure separation of Cisco Physical Access Control Gateway traffic on the network from other " normal " data traffic (for example, IP voice, e-mails, and web browsing)?

Options:

A.

IP routing

B.

firewalls

C.

QoS

D.

VLAN

Buy Now
Exam Code: 648-247
Exam Name: Implementing Cisco Connected Physical Security 2 Exam
Last Update: Apr 30, 2026
Questions: 52

PDF + Testing Engine

$65.27  $186.49
buy now 648-247 pdf + testing engine

Testing Engine

$52.32  $149.49
buy now 648-247 testing engine

PDF (Q&A)

$48.12  $137.49
buy now 648-247 pdf