AD0-E208 Adobe Analytics Business Practitioner Expert Questions and Answers

The best way to display the daily trend of Orders and their performance against the daily average for the last month is to use a Line Visualization to trend the Orders and the daily average as a Calculated Metric in the same chart. A Calculated Metric can be created by using the Average function on Orders and applying a date range of last month. A Line Visualization can show both metrics as lines on the same chart, allowing for easy comparison.

References: https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/calculated-metrics/calculated-metrics-overview.html?lang=en https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/calculated-metrics/calculated-metrics-overview.html?lang=en#creating-a-calculated-metric https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/visualizations/line-visualization.html?lang=en

Data Warehouse is a tool that allows you to run custom queries on raw data and export the results to various formats. It can also provide the IP address of the user as a dimension, which can help identify bot traffic without using a custom variable.

References: https://experienceleague.adobe.com/docs/analytics/export/data-warehouse/data-warehouse.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/dimensions/ip-address.html?lang=en

Since eVar11 has the allocation setting of Most Recent (Last), it means that it will always capture the last value that was set for that variable in a visit. Therefore, if there is a new value collected for eVar11, it will overwrite the old value that was previously persisted.

References: https://experienceleague.adobe.com/docs/analytics/components/variables/conversion-variables/conversion-var-overview.html?lang=en#allocation

Given the SDR, the report that can be generated is Booking Completion Rate. This is a measure of how many visitors who started an appointment booking completed it. It can be calculated by dividing event2 (Booking Complete) by event1 (Start Appointment Booking). The other reports, Time to Book an Appointment and Length of Appointments, cannot be generated with the given SDR, as they require additional variables or data sources.

References: https://experienceleague.adobe.com/docs/analytics/components/metrics/calculated-metrics.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/metrics/calculated-metrics.html?lang=en#calculated-metric-examples

Intelligent Alerts is a feature that allows you to set up alerts based on data anomalies or thresholds in your Analysis Workspace projects. You can choose to send an alert by e-mail with a link to your Analysis Workspace project when the alert is triggered. You cannot send an alert by SMS or with a link to an auto-generated Analysis Workspace project.

References: https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/predictive-analytics/intelligent-alerts.html?lang=en https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/predictive-analytics/intelligent-alerts.html?lang=en#intelligent-alerts-in-analysis-workspace

Unique visitors and visits are de-duplicated metrics, which means that they do not add up linearly across dimensions. For example, if a visitor visits two pages in one visit, the total number of unique visitors and visits for those two pages is still one, not two. Therefore, the total row in the table shows the actual number of unique visitors and visits for the whole site, not the sum of the values in the table.

References: https://experienceleague.adobe.com/docs/analytics/components/metrics/unique-visitors.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/metrics/visits.html?lang=en

The values displayed in the table are only product orders that have been purchased both two months ago and last week. This is because when a date range is applied at both the panel level and the metric level, the resulting date range is the intersection of both date ranges. In this case, since the panel date range is two months ago and the metric date range is last week, only the data that falls within both date ranges will be shown.

References: https://experienceleague.adobe.com/docs/analytics/components/time/time-overview.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/time/time-overview.html?lang=en#date-range-intersection

Occurrences is a metric that counts every hit where a dimension value is set, including page views and events. Therefore, if an entry page has more occurrences than entries, it means that visitors who entered through that page also triggered other events during their session. Entries is a metric that counts only the first hit of a visit where a dimension value is set, such as an entry page.

References: https://experienceleague.adobe.com/docs/analytics/components/metrics/occurrences.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/metrics/entries.html?lang=en

The best way to improve the user experience of Analysis Workspace for end users who complain that it is too cluttered with infrequently used variables is to suggest the team use Customize Menus. Customize Menus is a feature that allows users to hide or show dimensions, metrics, segments, or date ranges in Analysis Workspace based on their preferences. This can help reduce clutter and improve efficiency. Suggesting the team use Data Feeds or Data Warehouse will not help with this issue, as they are different tools that are used for exporting or importing data.

References: https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/customize-menus.html?lang=en https://experienceleague.adobe.com/docs/analytics/analyze/analysis-workspace/customize-menus.html?lang=en#customize-menus-overview

The column options that an analyst can choose to manage data feeds are Report Suite, Destination Type, Destination Host and Interval. These columns show information about each data feed configuration, such as which report suite it belongs to, what type of destination it uses (FTP or SFTP), what host name it connects to, and what interval it runs on (hourly or daily). Feed Name, Data Columns, Data Dimensions, Start Date and End Date are not column options for managing data feeds.

References: https://experienceleague.adobe.com/docs/analytics/export/data-feeds/data-feeds-ui.html?lang=en https://experienceleague.adobe.com/docs/analytics/export/data-feeds/data-feeds-ui.html?lang=en#manage-data-feeds

The best way to use segments to create a Freeform Table in Analysis Workspace that lists out all the Products by the number of visits each of its website pages receive is to create segments for all of the product names by page name and drag and drop them in order into the Table Builder of a Freeform Table with Visits. The Table Builder is a tool that allows you to customize your table layout by dragging and dropping dimensions, metrics, or segments into rows or columns. Creating segments for all of the product names by page name will ensure that only the pages that belong to each product are included in the table. Dragging and dropping them in order into the Table Builder will arrange them by product name as desired.

References: https://experienceleague.adobe.com/docs/analytics/components/table-builder/table-builder-overview.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/table-builder/table-builder-overview.html?lang=en#table-builder-in-freeform-tables

The data subset of the source report suite that will be available when using this virtual report suite is visit data for visits coming from a Social Network AND from the United Kingdom. This is because when two single condition segments are set up for creating a virtual report suite, they are combined with an AND logic. This means that only the visits that match both segments will be included in the virtual report suite.

References: https://experienceleague.adobe.com/docs/analytics/components/virtual-report-suites/vrs-overview.html?lang=en https://experienceleague.adobe.com/docs/analytics/components/virtual-report-suites/vrs-overview.html?lang=en#creating-a-virtual-report-suite