Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65
marks4sure logo
You have changed a parameter in the realm-config element and have issued the done command. The change has now been committed to the __________ configuration.
Examine the output below from the network interface configuration.
When the Net-Net 4000 does not get an ARP response from the device configured as its gateway in the configured retry time period, it will____________.
The ____________feature instructs the Net-Net 4000 whether to locally store all bindings for endpoints not located behind a NAT.
When configuring the Net-Net 4000, __________ SIP interface(s) is/are allowed per realm, and __________ SIP port(s) is/are allowed for a SIP interface.
What is the maximum number of Fast Ethernet ports or Gigabit Ethernet ports that can be supported by one Net-Net 4000 for signaling and media?
In a high availability (HA) cluster, a network administrator could trigger a system switchover manually from the __________ Net-Net 4000 by issuing the notify berpd force command.
In an H.323 network, a __________ provides translation services and communication between dissimilar networks.
__________ is the percentage of a Net-Net 4000 peer advertisement time for the other peer in the high availability (HA) cluster to wait before considering the peer out of service.
An alarm is triggered in a high available (HA) pair when there is a condition or event within the __________.
When SIP sessions are terminated and re-originated as they flow through the Net-Net 4000, the ____________ is rewritten to force all session related media to be routed through Net-Net 4000.
The __________ field value in the network interface configuration is used as the source IP address for ARP requests from the secondary Net-Net 4000 in a highly available pair when in the standby role.
When configuring the Net-Net 4000 to proxy registrations in the H323 stack element, the ___________.
Which one of the following statements is TRUE when H245 tunneling is enabled on the Net-Net 4000. The Net-Net 4000 will________________.
You have copied a new Net-Net OS to the Net-Net 4000 and changed the boot parameters according to the display below. On reboot, the Net-Net 4000 is in a boot loop.
training1# check-space-remaining boot boot:
0/29702144 bytes (0%) remaining
training1# configure terminal
training1(configure)# bootparam
'.' = clear field; '-' = go to previous field; q = quit
boot device : wancom0
processor number : 0
host name :
file name : /tffs0/sd200p23.gz /tffs0/sd400q10.gz
inet on ethernet (e) : 10.0.3.11:ffff0000
inet on backplane (b) :
host inet (h) : 10.0.3.1
gateway inet (g) : 10.0.0.1
user (u) : anonymous
ftp password (pw) (blank = use rsh) : anonymous
flags (f) : 0x80008
target name (tn) : training1
startup script (s) :
other (o) :
NOTE: These changed parameters will not go into effect until reboot. Also, be aware that some boot parameters may also be changed through PHY and Network Interface Configurations.
training1(configure)# exit
training1# reboot force
Based on the information above, which three of the following scenarios could be the cause of the boot loop?
Steering pools are realm specific, and by limiting the number of __________ provide constraints on the number of concurrent RTP sessions allowed on the Net-Net 4000.
In a high availability (HA) scenario, a node has a state of becoming Standby". This state indicates __________.
SIP is an Application layer control protocol that performs which two of the following functions?
You configure the _____________and _____________elements to use the Net-Net 4000 to perform load balancing between two downstream SIP proxies.
__________ is the percentage of a Net-Net 4000 peer advertisement time for the other peer in the high availability (HA) cluster to wait before considering the peer out of service.
To enable the Net-Net 4000 to provide next hop signaling load balancing, which two of the following licenses must be installed?
The __________ field value in the network interface configuration is used as the source IP address for ARP requests from the secondary Net-Net 4000 in a highly available pair when in the standby role.
SIP is an Application layer control protocol that performs which two of the following functions?
An alarm is triggered in a high available (HA) pair when there is a condition or event within the __________.
Of the following configured local policy preferences that the Net-Net 4000 sorts through, which one of the four preference discriminators listed below would be ranked the second highest priority?
To view an existing multiple instance element configuration you can go to the correct branch of the configuration tree and _______________.
Which of the following is not a potential cause for a switchover in a high availability (HA) scenario?
When configuring a network interface on the Net-Net 4000, the __________ feature allows you to set parameters for gateway failure detection.
Examine the output below from the network interface configuration.
When the Net-Net 4000 does not get an ARP response from the device configured as its gateway in the configured retry time period, it will____________.
When configuring the Net-Net 4000 to proxy registrations in the H323 stack element, the ___________.
The Net-Net 4000 is the source and destination for all signaling messages and media streams coming into and leaving the provider's network. Which two of the following SIP functions does it provide?
In a(n) __________ exchange, a Master Slave Determination message is an example of a type of message that might be exchanged during the media setup portion of the call.
When two associated H323 stacks in different realms have the gatekeeper parameter defined, which one of the following statements is TRUE?
The __________ parameter allows for multiple network interfaces to be bound to a single physical interface.
TESTED 02 May 2026