Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65
marks4sure logo
What is the name of the out-of-band system management connection for SC9000 systems?
A customer has a volume that was created with the wrong datapage size. What is the simplest and least disruptive method to change this volume’s page size?
Based on the exhibit, a customer is using a Virtual Port Mode configuration. If the cable for Domain 1 on Controller 1 is disconnected during failover testing, will the SC Series array port failover work?
Refer to the exhibit.
When scanning Fibre Channel on a QLogic HBA what information can be obtained?
You recently deployed two SC9000 storage arrays at a customer site one week ago and verified that everything was working correctly with replication. However, the customer notifies you that every time they tested disaster recovery (DR), they lost access to the volumes when the DR array shut down.
Why did the volumes become inaccessible during testing?
A customer wants to configure a threshold alert definition. Which types of definitions can be configured?
Refer to the exhibits.
Which is the correct front end and cabling for an SC7020 with 2 port FC connectivity?
A)
B)
C)
D)
What is the correct system hierarchy of SC Series array storage virtualization?
During the addition of an SCv360 enclosure to a SCv3020 the PCle SAS card is used for connectivity. The enclosure is NOT recognized by the system, why?
Which zones accurately describe the zoning requirement for replication connectivity to be established when the source array is in Legacy Port Mode and the target array is in Virtual Port Mode?
A customer is using an SC9000 array with two chained SC280 expansion enclosures. They need to expand its capacity by adding a third SC280 drive bay. What is the most cost efficient way to expand the array ' s capacity using as few chains as possible?
A company is using an SC4020 array and the storage administrator wants to expand the available capacity by adding 92, 3.5” disk drives. Which expansion enclosure(s) can be used to meet the demand?
When you enable Storage Profiles on a SC with two tiers of flash drives, which storage profile will appear in addition to the standard storage profiles?
Which component of the Dell Storage Manager (DSM) suite’s only purpose is to perform disaster recovery if the primary data collector is no longer available?
A customer notices a volume is using an above average amount of Tier 1 RAID 10 space. What can be done to force this data into a lower RAID set/Tier?
What is the maximum number of drives per chain supported by an SC9000 storage array?
What is order of steps that the Storage Center will follow when it senses that the UPS has lost input power?
There has been a request to add iSCSI functionality to a SC9000 array for replication. SC is currently using slots 4 and 5 for SAS back end. Slots 2 and 3 for Fibre Channel front end.
How many slots are available for new half-height I/O Cards?
An alert for a failed disk is visible under the alerts tab. Where would someone navigate to, in Unisphere Central for SC Series to identify the failed drive and have a graphical representation showing where in the enclosure the failed drive is located?
Based on documented best practices, which options may need to be modified on a server QLogic HBA?
To allow the Storage Center Update Utility (SCUU) to serve updates, which inbound TCP port should be opened on the Microsoft Windows firewall?
You are trying to discover a brand new SCv3020 but the process if failing. DHCP is not available. What is the best solution for this issue?
A customer is using an SC8000 array with three chained SC220 expansion enclosures on a single card. They need to expand its capacity by adding an SC280 enclosure. How should the new expansion enclosure be connected using a minimum number of chains?
Which SC Series array feature simplifies iSCSI connectivity and allows access to all ports through redirection?
You are going to install a SC Series running SCOS 7.3.x with 15K and 7K disks. What Data Reduction option will be available on this system?
A customer is concerned they are over utilizing their 7K drives. Where can information about the real time I/O usage of individual drives be viewed?
You are deploying a new SC9000 system running Storage Center OS 7.2. At which drive size does the system require you to begin running dual redundancy on both SSDs and HDDs?
You are about to perform the post-setup tasks with the Storage-Center wizard. What information is required before proceeding?
Assume a storage administrator is using the recommended storage profile. What describes the distribution of volume data residing in an SC series storage array that has 15K and 7K as the back-end?
What can be done in order to facilitate the WWN Zoning and port identification in Brocade switches?
Which statement is NOT correct for upgrading to SCOS version 07.03.01 and above?
A customer wants to add an iSCSI path to a Microsoft Windows Server 2012 R1. The server has an existing Fibre Channel path to an SC7020 array for load balancing and high availability.
Which Windows MPIO policy should be configured to achieve the customer’s requirement?
Which best practices should be followed when using iSCSI to connect SC Series arrays and hosts?
TESTED 02 May 2026
