DES-4421 Specialist - Implementation Engineer, PowerEdge MX Modular Exam Questions and Answers

What automatically opens a support case with technical support and collects the PowerEdge MX system state information that is required for troubleshooting an issue, then sends it securely to Dell EMC?

A technician has replaced an MX chassis tub. They complete the tub installation and power on the chassis. They notice that the KVM is no longer functional.

What should the technician do after confirming the KVM feature is still enabled in OME-M?

What is a benefit of using scalable fabric architecture in the MX7000?

Match each feature with its associated PowerEdge server management tool.

An administrator is asked to install and power-on a new MX740c sled in an MX7000 chassis. The administrator inserts the sled and presses the power button. They notice that the power button LED is blinking green. After a short time power button turns to solid green and the server finally turns on.

What operation was in progress when the power button was blinking green?

A company receives their first MX7000 chassis. They connect all the provided power supply cables into two different PDUs on different power grids for redundancy. Each of the six power supplies is cabled and has green LEDs. One Management Module is present along with all system fans. Grid redundancy is configured as the power redundancy mode. The chassis is fully populated with six compute sleds and one IOM but only two of the six sleds will power on.

What is the possible reason for this issue?

Refer to the exhibit.

How many internal server-facing ports are available on this I/O module for the MX7000 chassis?

Which MX7000 feature allows an administrator to virtualize network WWN and MAC addresses?

An administrator has been tasked with specifying hardware for a deployment having the following requirements:

4 node cluster within a single MX7000 chassis

Each node needs a minimum of 6x 2.5” drives

3 TB of memory and 64 physical CPU cores per node

What is the maximum hardware configuration that meets the requirements?

What item is used to refer to a daisy-chained configuration of a multiple MX7000 chassis environment?

A company has several MX7000-systems, four FX2 solutions, one M1000e, and several PowerEdge rack servers.

Which management interface is recommended for managing this range of systems?

What can be used as the firmware update source for OME-M within an MX chassis?

Refer to the exhibit.

What is shown?