If VoIP traffic uses multiple QoS prioritization schemes, what refers to VoIP traffic?
After setting up the VoIP configuration, a network administrator issues the following commands with the results shown:
console# show voice vlan
Administrative Mode………………………Enable
console# show voice vlan it gi 1/0/2
Interface………………………………….Gi1/0/2
Voice VLAN Interface Mode……………Enabled
Voice VLAN ID…………………...…….10
Voice VLAN COS Overwrite……………False
Voice VLAN DSCP Value…………...….46
Voice VLAN Port Status……………...…Enabled
Voice VLAN Authentication………….…Disabled
Based on this information, what is the Layer 3 QoS value?
A customer is upgrading their campus network Access layer switches. They require 2-10GbE uplinks, 48- 1GbE ports with PoE, and stacking capability of up to 12 units.
Which Dell EMC N-Series model will meet the customer's requirements?
Refer to the Exhibit.
Switch-1(config)# radius server host 10.1.1.111
Switch-1(config-radius)# key "secretkey"
Switch-1(config-radius)# exit
Switch-1(config)# aaa authentication login "LOCAL-AUTH" local
Switch-1(config)# aaa authentication login "REMOTE-AUTH" radius local
Switch-1(config)# aaa authentication enable "REMOTE-AUTH" radius enable
Switch-1(config)# aaa authentication login default tacacs local
Switch-1(config)# aaa authentication enable default tacacs enable
Switch-1(config)# line telnet
Switch-1(config-telnet)# login authentication "REMOTE-AUTH"
Switch-1(config-telnet)# exit
Switch-1(config)# line ssh
Switch-1(config-ssh)# login authentication default
Switch-1(config)# exit
Switch-1(config)# line console
Switch-1(config-line)# login authentication "LOCAL-AUTH"
Switch-1(config-line)# exit
Which authentication method will be used if a user tries to log into the switch when accessing through SSH?