Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65
marks4sure logo
Which VPLEX management NIC Interface must be connected to customer IP public LAN?
What should be the maximum latency between a VPLEX Management Server and the Cluster Witness?
Which type of volume has complete synchronized copies of data (mirrors) in more than one cluster?
What is EMC's best practice for fault tolerance when zoning a VPLEX Metro together over fibre channel for successful communication between the sites?
Refer to the exhibit.
After the "attach-mirror" command is successfully executed on device "device_VNX0506_CSE__6_1", the command "rebuild-status" shows an ongoing rebuild process on the same device.
What is a possible cause?
A VPlex administrator claims a 100GB Storage Volume that is thin provisioned on the storage array and has 25GB physically allocated and creates a 1:1 encapsulated virtual volume. After a local data mobility job for that Virtual Volume, the storage array administrator notices that the allocated capacity has increased to 100GB.
Why did this happen?
Refer to the exhibit.
You have created a Distributed Device in a VPLEX Metro system. Which VPLEX Object can be placed in a Storage View for Cluster-1?
An EMC customer wants to add a mirror to a VPLEX Local RAID 0 device. Which RAID type is created after the device attach-mirror command is issued?
Which unique logical identifier is used when determining the relationship between a virtual volume and the back-end storage array?
You have added a new storage array to your environment, but VPLEX, does not see it. Which VPlexcli command will display the new storage array?
You are preparing a site for a large Metro VPLEX cluster. The storage administrator wants to prepare the storage network configuration and needs to ensure easy troubleshooting of storage path faults.
How many WAN-COM zones will need to be created?
Refer to the exhibit.
A customer is moving some VMAX devices under a VPLEX Local and is using PowerPath as multipath software. What is the preferred PowerPath load balancing policy assigned to VPLEX volumes?
A customer has purchased a dual engine VPLEX Metro cluster. During installation, there are not enough free SAN ports to connect all WAN-COM ports to the SAN. What is the recommended approach?
What can you use to generate a list of VPLEX fabric initiator and target identifiers?
What is a group of VPLEX directors that participate in the cache coherence protocol for a virtual volume?
In a customer's VPLEX Metro environment, a host has been provisioned as a single virtual volume from cluster-1. The customer now needs to convert the local virtual volume to a distributed device.
How can the customer accomplish this?
You are using VPLEX Unisphere to perform management functions in your environment. You are tasked with creating several volume migrations to a new storage array.
What tab should you use to perform this migration?
A customer has asked you to inspect their SAN connectivity before upgrading their Local configuration to a Metro. What will the output of the connectivity validate-be command provide for an analysis of this environment?
In which asynchronous Consistency Group Operation stage are the delta sets written to the storage arrays?
In a VPLEX Metro with Witness, which command returns the remote VPLEX management IP address and the witness public IP address?
When configuring a VPLEX local cluster, according to EMC best practices, how many metadata volumes are required?
What is the recommendation when executing collect-diagnostics command on a VPLEX Metro/GEO?
A customer is verifying the host environment before scheduling a VPLEX NDU. According to EMC best practices, which PowerPath load-balancing policy is applied by default to all platforms?
Refer to the exhibit.
The customer has not followed EMC best practices when cabling their VS2 VPLEX engine. You are asked how to re-cable the engine to adhere to best practices. What is your response?
A customer is performing maintenance on their network that might affect their VPLEX Witness VM.
What can be done to ensure there are no adverse effects due to a Witness outage?
You have added a new storage array into VPLEX, but it does not see it. Which VPLEX command will display the new storage array?
A host attempted a read from a volume in a VPLEX Metro configuration. The data does not exist in cache at all.
What process does VPLEX use to service the read request?
Refer to the exhibit.
What is the function of the two highlighted VPLEX VS2 modules?
When inspecting a VS1 director's status LEDs, you see that a status LED is blue. What does this indicate?
You have attempted to upgrade a VPLEX system to the latest Geosynchrony code. During the upgrade, an error appeared and caused the upgrade to fail.
Which file should you review to gather more information about the failure?
During ndu pre-check, a partner found that metadata-backup is not working. In addition, metadata-backup volume components have been renamed.
How can the problem be resolved?
During an installation, the physical equipment inspection reveals an ESX host used for VPLEX Witness is located in the same rack as VPLEX cluster 1 Engine. What needs to be done?
Which command-line option can be invoked within VPlexcli as a task to recognize and use new LUNs provisioned to a cluster?
A customer is moving some VMAX devices under a VPLEX Local and is using PowerPath as multipath software.
What is the SCSI product ID assigned to VPLEX volumes?
A customer has ordered a two-engine VPLEX cluster to be installed in a custom rack. A minimal VNX5300 is already installed in the middle of the rack, occupying nine rack unit spaces.
What is the correct approach to deploy the two-engine VPLEX cluster?
The monitor report is added to the scheduler with the command schedule add "0 1 * * *“ –c report poll-monitors
When is task scheduled to execute?
Refer to the exhibit.
You are planning to perform data mobility between VPLEX Clusters using the GUI. What mobility job options do you have?
What option must be set for a consistency group to continue synchronization without manual intervention, once connectivity is restored?
Refer to the exhibit.
You are performing a health-check on a VPLEX VS2 Metro system. After running several commands, you notice port errors on the VPLEX directors.
What does the information listed under Checking ports status indicate?
Refer to the exhibit.
You have created a Distributed Device in a VPLEX Metro. You want to confirm the volumes before performing a mobility job within the cluster. You will be moving the device to cluster 1.
Which object will be the source for this operation?
What unique logical identifier is recommended when determining the relationship between a virtual volume and the back-end storage array?
Which VPLEX component can determine the difference between a partition and a site failure of a VPLEX Metro configuration?
What is the EMC best practice for the optimum number of back-end storage paths per director presented to a LUN?
Following EMC best practices, what information is required to register a VPLEX on an ESRS portal?
What is the maximum number of Virtual Volumes that can be created in a VPLEX Version 5 Cluster?
What is an EMC best practice for fault tolerance when zoning a VPLEX Metro together over Fibre Channel for successful communication between the sites?
A customer has a VPLEX Metro configuration across two data centers 200 km apart. During an overnight backup, the WAN-COM link between the two data centers fails. What VPLEX object allows for future incremental re-synchronization with the remote mirror once the link is restored?
A customer has a database application that has multiple distributed virtual volumes. They want to ensure that in the event that one of their data centers goes offline, the virtual volumes will all be available to the surviving site.
What VPLEX option should they implement?
TESTED 02 May 2026
