Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65
marks4sure logo
What is a quick way to determine if the required TCP ports for RecoverPoint are blocked?
A storage administrator is installing the VSI RecoverPoint Management plug-in, but the installation fails.
What could be causing this?
You ran Collect System Information from an RPA. However, you forgot where you specified to save the logs on the FTP server.
What is the recommended way to retrieve the logs?
After installing two RecoverPoint clusters you find that a Consistency Group cannot be configured with a remote copy. Why?
When logging into an unattached RecoverPoint appliance for the first time, which username and password combination must be used?
When registering the RPA with a VNX to enable a VNX splitter for RecoverPoint, what failover mode must be set on the VNX?
During deployment of a vRPA OVF template a temporary IP address must be set to be used by Deployment Manager in later steps.
Which IP address allocation policy should be selected?
What is used when more performance is needed than a single RPA can provide for asynchronous replication?
When is the Open Replicator RecoverPoint session created for each production volume in the Consistency Group (CG)?
What is the maximum number of RecoverPoint clusters that can share a VMAX splitter?
System events can be copied to the clipboard from which Unisphere for RecoverPoint view?
A Consistency Group consists of one production copy, one local copy, and two remote copies.
How many journals are required for this configuration?
An organization is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to a single VNX platform.
How many RecoverPoint clusters can be used in this environment?
A company is currently using RecoverPoint/CL with CLARiiON CXs in their environment. All of the data has been migrated to new VNXs and the CX splitters need to be removed from RecoverPoint.
How is this accomplished?
A company is using an EMC VNX storage array. RecoverPoint is being configured to replicate to a DR site. RP will be protecting three datastores:
A thick 100 GB LUN containing 60 GB of data
A thin 50 GB LUN containing 15 GB of data
A thick 75 GB LUN containing 75 GB of data
How much of the user data is being replicated to the DR site?
A company recently acquired a new DR site and requires their production data to be replicated to this DR site.
What is an important consideration about the RecoverPoint out-of-band architecture?
After selecting a cluster in the RPA Clusters tab, which option can display alerts that have been logged for any of the physical components of the RecoverPoint system in that cluster?
Which type of Consistency Group requires a primary and secondary production copy?
A company has just installed a RecoverPoint solution and configured it with two clusters.
Which command will monitor system performance for both sites?
A customer environment uses VMAX arrays for production storage. The customer wants to implement RecoverPoint for data protection. Having researched vRPAs, they want to use this technology as well.
What should you advise them?
A customer has two VMAX arrays and three VNX arrays fronted by an EMC VPLEX. They wish to use RecoverPoint to protect their environment.
How many licenses, and of which type, would be required for their environment?
An existing RecoverPoint cluster has four physical RPAs deployed with VMAX arrays. Which RPAs need to be masked to the VMAX gatekeepers in order to deploy the VMAX splitter?
What is the maximum number of copies of production data supported with RecoverPoint?
You are concerned about the performance of the RecoverPoint replication. Some of the Consistency Groups continue to go into High Load. Initial troubleshooting points to a data compression issue.
Which command will determine if compression is set too high?
You are working on a RecoverPoint local replication solution in an environment that includes VNX and VMAX storage arrays. You want to create a Consistency Group (CG) for your Oracle database. However, some of the database volumes are located in the VNX and others are located in the VMAX.
What is the recommended management solution?
You are implementing a RecoverPoint/SE cluster using vRPAs. What must be configured and available on the new VNX array prior to the installation of the cluster with Deployment Manager?
After expanding to include an additional existing RecoverPoint cluster you use Deployment Manager to connect the clusters, but it fails.
What might be the problem?
You are a storage administrator tasked with creating a Consistency Group in a RecoverPoint/EX system. You launch the Protect Volumes wizard in Unisphere and notice that the desired production volume is not available.
What would be a possible cause?
A conversion from RecoverPoint/SE to RecoverPoint/EX was just completed. What is the next required step?
A company has a database protected by RecoverPoint that has become corrupted. They want to use the Recover Production wizard to repair the corruption.
What action should be taken at the production host prior to starting the recovery?
Which RecoverPoint tool will recommend the preferred RPA you should assign to each Consistency Group?
You are protecting a volume using the wizard in Unisphere for RecoverPoint. Which state will the new Consistency Group be in immediately after completing the wizard?
Which IP diagnostic command is used to test the IP connectivity performance between RPAs when the 'Test Throughput' option is chosen in the RPA interface?
When using Deployment Manager to install RecoverPoint/SE, which zoning methods are available with Brocade switches?
An administrator experiences a serious error with an RPA and calls EMC Support to resolve the issue. They are concerned that the system did not automatically notify EMC Support via the ESRS gateway. You check all settings in Unisphere Configure System Notification and find they are correct.
What is the most likely cause for this notification failure?
You are creating a Consistency Group with the Protect Volumes wizard in a RecoverPoint/EX environment.
What LUNs are displayed in the list generated by the wizard?
A customer is evaluating the deployment of RecoverPoint with their VMAX array. They want to deploy the RPAs in the virtual appliance form. They ask your opinion about using vRPA versus physical appliances.
What should you advise them?
An environment consists of a two-RPA, single cluster. There are 74 Consistency Groups (CGs) configured and replicating. The administrator asks you what impact an RPA failure would have.
What should you tell them?
A company believes their WAN IP network has performance problems. Which IP diagnostic tool can be used to confirm this issue?
A large data center is hosting storage protection solutions for multiple companies. This solution is accomplished by the hosting organization's ability to consolidate data to an environment with two VNX arrays.
How many RecoverPoint clusters can be used in this environment?
Which Ethernet interface on an RPA is used for replication to the remote clusters?
A storage administrator has a RecoverPoint environment with vRPAs containing 64 Consistency Groups (CGs). They want to create distributed CGs.
What is the maximum number of distributed CGs that can be added to this particular system?
A customer wants to implement a two-node RecoverPoint solution with local replication. How many IP addresses are required for each cluster?
A company has a RecoverPoint cluster in a remote replication environment that has several Consistency Groups. The Consistency Groups are constantly going into High Load. After reviewing the Unisphere for RecoverPoint event log, you see the following event:
Journal is unable to handle the incoming data rate
What should you review to identify the problem?
A new RecoverPoint/SE environment has been installed with a single cluster. There are no limitations regarding journal sizes and you want to choose how frequently RecoverPoint can create point-in-time copies.
What is the highest frequency available for point-in-time copies in this environment?
A customer has a four-node RecoverPoint cluster using a VNX array. All LUNs are replicating and failover has been tested. The customer would like to integrate RecoverPoint and Unisphere. However, they are unable to manage the cluster through Unisphere.
What should the customer do to correct the issue?
What is the maximum supported storage capacity, per license, for an EMC RecoverPoint/EX environment?
TESTED 01 May 2026