Black Friday Flash Sale: Get 70% Off! Use coupon code below to save big on all exam bundles! Use coupon code below to save on all exam bundles!
Code: bestfriday
Ends in: 0d 00h 00m 00s

Free Practice Questions for the Huawei HCIE-Datacom H35-831 Exam (2026 Updated)

At Marks4sure, we are dedicated to providing IT professionals with the most accurate and reliable preparation materials for the Huawei H35-831 exam. To support your certification journey, we have made a selection of our premium 2026 HCIE-Datacom practice questions and answers available completely free. You can take this practice test as many times as you need. Every question includes a detailed, expertly verified explanation to ensure you fully grasp the core security concepts before test day.

Questions 4

Which of the following statements are correct regarding the reliability of MVPNv4 over BIERv6?

Select all that apply.

Options:

A.

To improve the reliability of the multicast solution, it is advisable to plan separate paths for the primary and backup tunnels.

B.

In the 1+1 dual-root protection solution, the multicast source sends multicast packets to receiver PEs through both primary and backup tunnels. However, only the packets on the primary tunnel are sent to the private network.

C.

In the 1+1 dual-root protection solution, if traffic on the primary tunnel is interrupted and a leaf node PE detects this interruption, t he leaf node PE immediately checks whether the traffic on the backup tunnel is normal. If the traffic is abnormal, the leaf node PE resends a C-multicast route to initiate a VPN user join request.

D.

MVPNv4 over BIERv6 supports 1+1 dual-root protection.

Buy Now
Questions 5

In the inter-AS VPN Option B network shown, Site1 and Site2 can communicate. CE1 has a route to 10.1.1.1/24, and CE2 has learned that route. PE1, ASBR1, and ASBR2 assign VPN labels 15360, 15361, and 15362, respectively, to the route. In addition, PE1 and ASBR2 assign public-network label 3 to their own loopback interface addresses. For packets sent from CE2 to 10.1.1.1, which label pushed by PE2 is the innermost label?

H35-831 Question 5

Exhibit 46.1 — Original topology/configuration figure

Options:

A.

15362

B.

3

C.

15360

D.

15361

Buy Now
Questions 6

Which backup modes do vBRAS-UPs support?

Select all that apply.

Options:

A.

N+1 warm backup

B.

N+1 hot backup

C.

N:1 cold backup

D.

N:1 warm backup

Buy Now
Questions 7

Which of the following statements is incorrect about the SR-TE tunnel configuration below?

[R1] interface tunnel1

[R1-Tunnel1] ip address unnumbered interface LoopBack0

[R1-Tunnel1] tunnel-protocol mpls te

[R1-Tunnel1] destination 3.3.3.3

[R1-Tunnel1] mpls te tunnel-id 1

[R1-Tunnel1] mpls te signal-protocol segment-routing

[R1-Tunnel1] mpls te pce delegate

Select all that apply.

Options:

A.

The tunnel ID of the tunnel is 1. Other SR-TE tunnels on the device cannot have the same tunnel ID as this tunnel.

B.

The tunnel interface borrows the address of the Loopback 0 interface.

C.

The tunnel interface uses SR as the tunneling protocol.

D.

The tunnel interface uses a manually specified path.

Buy Now
Questions 8

In the network shown, RT4 and RT5 function as ASBRs and import IS-IS routes into OSPF. Only OSPF is used for interworking between RT4 and RT5. The link costs are shown in the figure. The key configurations of RT4 and RT5 are as follows:

H35-831 Question 8

Exhibit 36.1 — Original topology/configuration figure

H35-831 Question 8

Exhibit 36.2 — Original topology/configuration figure

Options:

A.

RT1 accesses 6.6.6.6 through the RT2 - > RT4 - > RT6 path.

B.

RT1 has two routes to 6.6.6.6, and traffic is balanced between the two routes.

C.

RT1 accesses 6.6.6.6 through the RT3 - > RT5 - > RT6 path.

D.

RT1 has two routes to 6.6.6.6 and selects one of them to forward traffic.

Buy Now
Questions 9

Which of the following are applications of BFD in a 5G transport network?

Select all that apply.

Options:

A.

BFD is enabled for TE tunnels to trigger VPN FRR.

B.

BFD is enabled between IGP peers to trigger SR-BE FRR.

C.

BFD is enabled for TE LSPs to trigger TE hot standby.

D.

BFD for interface can be enabled on core devices and the core network side to trigger VRRP or active/standby route switching.

Buy Now
Questions 10

In the inter-AS VPN Option A network shown, CE1 and CE2 are in the same VPN. LDP and IGP are configured in both AS100 and AS200, and EBGP is configured between the ASBRs. CE1’s loopback interface is assigned 10.1.1.1/32. If CE2 can ping CE1, which router assigns the inner label to CE2-to-CE1 packets forwarded by PE2?

H35-831 Question 10

Exhibit 45.1 — Original topology/configuration figure

Options:

A.

ASBR1

B.

ASBR2

C.

P2

D.

P1

E.

PE1

Buy Now
Questions 11

Which statements correctly describe the MVPN route types used in the MVPN over BIERv6 solution?

Select all that apply.

Options:

A.

When a receiver PE receives a PIM (C-S, C-G) Join or Prune message, it converts the message into a Leaf A-D route.

B.

Both sender and receiver PEs can send Intra-AS I-PMSI A-D routes.

C.

Intra-AS I-PMSI A-D routes are used to discover MVPN members and establish I-PMSI tunnels.

D.

Both sender and receiver PEs can send S-PMSI A-D routes.

Buy Now
Questions 12

Which of these statements is incorrect regarding SRv6 SFC?

Options:

A.

SRv6-aware SFs can identify and process received SRv6 packets.

B.

SRv6-unaware SFs can implement the SFC functionality without requiring SF proxy configuration.

C.

SRv6-unaware SFs cannot identify SRv6 packets and therefore discard them upon receipt.

D.

The SIDs of SRv6-aware SFs can be directly orchestrated into SFC paths to implement the SFC functionality.

Buy Now
Questions 13

Which statements about the backbone-network solution model for an IP transport network are correct?

Select all that apply.

Options:

A.

If RRs are deployed on the transport network, all PEs need to establish BGP peer relationships with the RRs.

B.

If no RR is deployed, PEs do not need to establish full-mesh BGP peer relationships.

C.

If multiple clusters are planned on the IP transport network, full-mesh BGP peer relationships need to be established between RRs in different clusters.

D.

If RRs are deployed on the transport network, IBGP peer relationships need to be established between PEs.

Buy Now
Questions 14

In BGP EVPN, which of the following route types is used to advertise external routes?

Options:

A.

Type 3

B.

Type 5

C.

Type 1

D.

Type 2

E.

Type 4

Buy Now
Questions 15

Which of the following statements regarding the telco cloud network are correct?

Select all that apply.

Options:

A.

If two DC GWs are single-homed to PEs, you are advised to adjust route preference in a way that traffic from the two DC GWs uses different PEs as next hops. Otherwise, one PE may become overloaded.

B.

If the management & storage network and service network are deployed independently, they are physically isolated. If one network is attacked, the other network continues to run as usual, ensuring overall security.

C.

The service network uses the flattened spine-leaf architecture to provide high bandwidth, elastic scalability, and flexible access.

D.

As the telco cloud network expands, some sites that use box-shaped devices as DC GWs may fail to meet the bandwidth requirements of north-south service traffic, yet carriers may not want to replace existing DC GWs with high-capacity ones. In this case, the egress bandwidth of the telco cloud network can be increased by adding more DC GWs.

Buy Now
Questions 16

Which of the following SIDs encapsulates the outer destination address for BIERv6 multicast packets?

Options:

A.

End.BIERv6 SID

B.

End.DT6 SID

C.

End.DX6 SID

D.

End.BIER SID

Buy Now
Questions 17

SR and LDP interworking technology allows SR and LDP to operate together on the same network. SR and LDP networks can be interconnected through this technology to implement MPLS forwarding. To interwork with an LDP network, an SR network needs a particular device type to advertise SIDs on behalf of SR-incapable LDP devices. What is this device called?

Options:

A.

Mapping client

B.

LDP server

C.

LDP client

D.

Mapping server

Buy Now
Questions 18

Which of the following statements are accurate regarding router ID planning in a 5G transport network?

Select all that apply.

Options:

A.

Addresses must be properly reserved at each layer to prevent re-planning required for network expansion.

B.

It is recommended that router IDs on the same ring be consecutive and use 32-bit host addresses.

C.

Two devices on the transport network cannot use the same router ID.

D.

In address planning, it is good practice to make each address meaningful. In this way, you can roughly determine the location and services of a device based on an address.

Buy Now
Exam Code: H35-831
Exam Name: HCIE-Datacom-Carrier (Written) V1.0
Last Update: Nov 15, 2026
Questions: 60

PDF + Testing Engine

$55.71   $185.69

Testing Engine

$42.85   $142.83

PDF (Q&A)

$47.13   $157.11