HPE0-V14 Building HPE Hybrid IT Solutions (Rev. 19.41) Questions and Answers
You are managing a HPE ProLinat rack-mount server and need to determine when the Remote Console was most recently used.
Where can you find this information?
A customer needs the devices in their non-secure network to communicate in a secure manner. They are considering implementing Kerberos network authentication in their environment.
Which impact will this have when using iLO 5 with their HPE ProLiant Gen10 servers?
A customer needs to centralize their backup environment for their branch office They plan to use HPE StoreOnce with catalyst
What should they implement within their backups software to minimize the network load on the remote site?
You are troubleshooting a HPE ProLiant Gen 9 server and need to find a consolidated view of all the system health and co nfiguration information in a single web interface.
Which HPE tool should you use?
you are designing a system for a customer that runs an OLTP application. The customer has SAN based storage. They need to accelerate application performance.
Which HPE ProLiant Gen10 feature set will address this customer’s needs?
A customer needs to update firmware and perform diagnostic tests on various components of a HPE ProLiant server.
Which utility should they use?
You need to install 10 HPE ProLiant servers in an environment without DHCP.
Which tool can you use to set up remote management?
A customer needs Layer 2 switches that provide basic functionality. In the future, this customer might need to use the switches’ CLI to confi gure VLAN and STP features .
Which category of the switches does meet the customer’s needs?
You are troubleshooting a HPE ProLiant rack-mount server. All installed server fans constantly run at 100%.
Which action should you take first?
A customer needs to improve throughput performance of iSCSI traffic on their Layer 2 switch. Which feature should the customer implement at the switch level?
You are designing a system for a customer that has a contract with a government agency . The contract requires the highest level of security algorithms possible.
Which HPE ProLiant Gen10 feature set will address this customer’s needs?
Which tool provides a report on the current usage levels and life span of some installed read-intensive flash drives?
A customer has an application that consumes 500 GB storage and requires an RTO and PRO of 15 minutes.
Which backup and recovery technology enables the customer to meet their requirements in the most cost-effective manner?
You are troubleshooting an HPE ProLiant rack-mount server. You need to collect event data from the server, even when it is not operational.
Which tool should you use?
A customer is planning an upgrade to their network infrastructure. They want to move to an open networking solution, and they want to install a network switch that supports their choice of network operating system.
Which HPE product family will meet the customer’s needs?
A customer needs to virtualize their storage across physical servers and storage environments.
Which HPE solution meets the customer’s needs?
A customer needs a Fibre Channel storage solution that supports block storage with the lowest cost.
Which HPE solution meets this customer’s requirements?
A customer is considering an upgrade of their network, which connects 10 servers. The customer has a converged data center networking architecture with Layer 2 and Layer 3 functionality. Which HPE product family will meet this customer’s needs?
A customer plans to purchase five HPE DL380 Gb 2-port 530SFP Ethernet Adapters. The customer ' s network administrator has Installed a top of rack 10 GbE switch capable of supporting copper and optical connections. The customer is already over budget and needs to keep costs down.
Which option should you recommend Tor connecting to the switch?
You are troubleshooting an HPE ProLiant rack-mount server. You need to run diagnostic tests on local storage.
Which HPE tool should you use?
You are provisioning a new virtual disk group on a MSA storage system.
Which disk group parameters must you specify when creating the vdisk? (Choose three.)
You are installing HPE ProLiant servers into a rack that will be fully loaded. You also need to install four power distribution units (PDUs) in the rack.
How should you install the PDUs to maximize power distribution and space efficiency?
A customer reports that their new iSCSI MSA 2052 has failed. You find that the MSA is up and running, but the servers cannot mount their LUNs.
Which troubleshooting steps should you prioritize? (Choose two.)
A customer requires a MSA storage system that they use for archiving data. The system needs to provide a large amount of storage.
Which drive type meets the customer’s needs?
A customer has a small branch office that requires a tower-based server solution. The customer runs office-based applications and wants lights-out management capability.
Which HPE server family meets the customer’s needs?
What can you do when installing an HPE switch to provide protection from electrostatic discharge?
You are installing new drives into the internal cage of a HPE ProLiant DL380 server.
How is the drive device number set?
A customer needs to create a large RAID set for archive storage on large-capacity drives.
Which RAID level is recommended for this customer?
You are designing a solution to run a Citrix XenDesktop workload.
Which HPE planning and designing resource contains a detailed example of this type of solution, including a list of all the hardware and software components?
A customer is upgrading their network infrastructure to provide the best performance for IP storage .
Which technologies in a network switch meet the customer’s needs? (Choose three.)
A customer needs a solution that will maintain data availability in their campus location. They require a multi-node system that can sustain multiple failures, including a full building outage.
Which HPE storage platform meets the customer’s needs?
A customer has reported that while running an application that is streaming live data, they experience fluctuations in processor frequency as they increase the server performance.
Which HPE ProLiant Gen10 system tuning feature would help eliminate this issue?
Which statement is true regarding configuring memory in an HPE ProLiant server?
A customer plans to back up a file server that holds 2 TB of data. The customer wants to upgrade their network infrastructure to support backup and to implement a datacenter network solution.
Which solutions would HPE recommend to meet the customer needs? (Choose two.)
A customer needs a storage to run a database in an environment with many virtual machines. You have recommended a HPE MSA 2042 solution, but the customer has reservations about whether the MSA 2042 can deliver the required performance.
Which feature of MSA 2042 will help to improve iOP performance?
You are troubleshooting a customer’s HPE ProLiant rack-mount server. The customer has configured the server in Legacy Boot BIOS Mode and is trying to boot from a USB 3.0 drive. The server will not boot from the drive.
What should you do?
While troubleshooting a HPE ProLiant Gen10 rack-mount server, you determine that the current and backup system ROMs are corrupt .
What should be the next step to fix the server?
A customer has a HPE OneView environment and has added all their HPE ProLiant servers and enclosures.
Which benefits does a customer gain by configuring Remote Support on their environment? (Choose two.)
You are installing a data center switch.
Which methods are recommended to configure the switch? (Choose two.)
A company needs a solution that provides SMB and NFS file shares. The solution must have a built-in data backup to Microsoft Azure.
Which HPE solution meets the customer’s needs?
A client complains about systems reliability issues caused by their staff’s inability to identify the root cause of failures. The client’s lead administrator wants to automatically send data from HPE OneView to additional listeners in the network.
What should you configure in HPE OneView to enable the external monitoring of the managed devices?
A customer has requested that you provide them with an architecture and bill-of-materials for a stack of top-of- rack switches. The customer has 34 HPE DL360 servers in the rack, each with four 1GBASE-T Ethernet ports which need to be connected to the network.
The customer is upgrading 50% of the 1GBASE-T Ethernet ports on the servers to 10GBASE-T Ethernet ports and needs the switching to support the upgraded servers. They are opposed to a chassis switch, and want to keep the number of managed devices on the network to a minimum.
Which architecture meets the customer requirements?
Indicate whether each management feature manages or monitors a single system or multiple systems.
A solution integrator is installing new data center components including an HPE G2 Advanced Rack with two Standard Series G2 PDUs A customer observing the installation process questions whether there will be sufficient power for additional equipment that may be added in the future.
How should the solution integrator respond?
A customer needs to update a server’s firmware using the latest Support Pack for ProLiant (SPP). They use a bootable USB flash drive to do so, and they select Interactive Mode on boot. Once the device boots, they are unsure how to proceed and ask for your assistance.
What can you tell them to do to easily update the firmware?
A customer recently installed a VMware environment with HPE ProLiants, HPE MSA storage, and Aruba switches.
What should you recommend to the customer to manage their support contracts with HPE?
Which feature in a block storage array is effective in decreasing the size of blocks?
Refer to the exhibit.
You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check.
Which Nimble component needs to be added to the configuration to complete the solution?
Which series of internal checks will an HPE ProLiant server use to validate that the base hardware components are working correctly before booting the operating system?
What is the most important difference between an HPE ProLiant DL380 Gen10 server and an HPE ProLiant DL385 Gen10 server?
A small, expanding law firm wants to replace its single Windows server
The server will be kept in their library without a rack. They want a server that allows for internal storage growth and is capable of adding PCI adapters.
Which HPE server model type should you recommend?
A customer environment is being managed and monitored with HPE OneView. A review of the OneView log shows that there have been several trap storm events.
Which series of events must take place for OneView to insert a Trap Storm event entry into the log of system events?
You need to create a dynamic bridge-aggregation group on a FlexFabric switch to ensure the ports are automatically configured with the applicable bridge-aggregation interface configuration
Drag the steps on the left Into their appropriate order in the answer area on the right.
A customer wants to install an HPE Proliant server that has a single dual port 10Gb NIC.
Which NIC feature should you introduce to allow each 10Gb port to be seen as four individual adapters in the operating system?
A customer acquires an HPE 3PAR Storeserv 8200 Solution for a data center environment with the following configuration:
2 Controllers Nodes
Physical Service Processor
2-tier configuration using 16 SSD and 12 NL HDD
2 SN3000 San Switch each with 24 FC ports
After installation and configuration, the storage is put in production. When tiering with the Adaptive Optimization SW is being performed, the customer encountered performance differential issue.
What could be the cause of this issue?
A customer plans to use HPE ProLiant servers for line-of-business applications . They want to configure the servers to increase reliability .
Which workload profile should the customer use?
A customer is planning to deploy a branch office server rack. The environment will have the following requirements:
Single rack with 20 HPE ProLiant DL360 Gen10 Servers.
Each Server will have 6 x 10G SFP+ Ports.
Each Server will have a dedicated iLO port.
The customer requires that only two switches be used.
The customer requires separate control planes.
Which switch configuration can meet these requirements?
A system administrator’s performing the BIOS/Platform configuration of a DL380 Gen10 server. You notice the amber health LED.
The health status of which solution components can be verified with embedded UEFI Diagnostics? (Choose two.)
A customer needs to move data residing in one class of disks to a more appropriate class of disks based on data access patterns without manual intervention.
Which HPE MSA storage technology/feature will meet the customer requirement?
An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive.
What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?
You are configuring an MSA 2052 for one of your customers in OCA.
Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.
A customer with limited IT administration resources needs a complete HPE server, storage, and networking solution. The solution must be able to be deployed in an hour or less through a simple, wizard-based setup. They want to manage the HPE solution through a simple, integrated plug-in to vCenter, since their IT staff members are already familiar with vCenter.
Which HPE solution best meets the customer requirements?
A customer just purchased a ProLiant 300 series Gen10 server and wants to install the latest version of Windows.
Which feature of this server will assist the customer with the initial Windows installation?
A retail company recently implemented a Video surveillance solution. They now need an MSA storage solution with 100TB capacity. They want to be able to add more disk capacity if needed.
Which HPE tool can help you choose a storage solution, determine the total usable capacity, and create a BOM?
You are validating a configuration prior to quoting it for the customer. You plan to propose the following configuration:
Two HPE DL380 Gen10 servers with dual processors, 256GB of memory, dual 10Gb NICs, SN1100Q 16Gb dual port FC HBA, dual 800W power supplies, and high temperature fan kit
HPE Nimble HF20H with 11TB storage, 960GB of cache, dual port 10GbE NIC, and 16Gb dual port FC adapter kit
Two SN3000B FC Switches
Which tool should you use to verify firmware compatibility between the storage and server components in this proposed solution?
A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment
Which solution meets the customer needs?
A customer needs to integrate a new digital video surveillance solution into their existing environment and available network ports. The solution needs to include redundant hypervisor servers and a redundant SAN with a shared Fibre Channel attached storage array.
You plan to propose the following configuration:
2 HPE DL380 Gen10 servers with dual processors, 384 GB of memory, dual port 10 Gb NIC, and High Performance Fan Kit
1 HPE MSA 2050 Dual Controller Storage Array with 24x 1.8 TB 10 K SAS drives and 96x 7.2K NL drives
4 VMware vSphere Standard licenses
1 VMware vCenter Server Foundation licenses
5 year 24x7x4 support for all equipment
What must be added to the configuration to provide a complete solution? (Choose two.)
A customer requires a management solution that will provide email notifications if hardware errors occur on their servers.
Which management solution provides this functionality?
A customer needs a video archive repository initially starting at 30TB internal storage. The repository is expected to grow at 20% annually and should have a lifespan of 3 years.
Which HPE ProLiant server solution meets the customer’s requirements?
A customer has a small business office and is concerned that the local storage in their current ProLiant Gen 10 server with a Linux OS Is reaching maximum capacity
Which solution should you recommend to expand the customer’s data storage capacity?
Refer to the exhibit.
A customer needs a server with four 10Gb network adapters. They need it to be configured for the best possible network throughput.
Given the BOM in the exhibit, what do you need to add to this server to meet the customer requirement?
A customer needs to move from their traditional tape-based backup infrastructure to a standalone application to disk based backup solution using HPE StoreOnce. The environment does not use a hypervisor.
The customer has the following goals for their long-term backup retention:
retain data for over two years at low cost
data is archival and rarely accessed, if ever
Which HPE StoreOnce components can help meet the customer goals in the most cost effective manner? (Choose three.)
A customer has a single HPE ProLiant Gen 10 server.
Which embedded management tool should they use to monitor the server?
Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?
Where would a customer go to run the SSD wear Gauge report on an HPE ProLiant server?
A customer ordered a pair of HPE SN3000B 16 Gb Fibre Channel Switches to provide Fibre Channel connectivity between VMware ESXi hosts and HPE 3PAR StoreServ 8200.
Which adapter i s required to support Fibre Channel connectivity from the VMware ESXi hosts to the new switches?
Which network protocol is used to build a loop-free logical topology for Ethernet networks?
PDF + Testing Engine
Testing Engine
PDF (Q&A)
