HPE6-A69 Aruba Certified Switching Expert Written Exam Questions and Answers
A customer is migrating from a Cisco VSS system to an ArubaOS-CX VSX cluster in order to provide default gateway functionality, the local network administrator creates VLAN interfaces The network administrator then migrates successfully from Cisco to Aruba
The next day a manager asks if the solution is redundant. The network administrator realizes that there is no redundancy on the default gateway functionality
What is the preferred solution with the least amount of configuration and disturbance?
Refer to the exhibit.

• For all traffic within VLAN 10. a remark action or DSCP value EF must be set
• For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set
Which is the correct configuration?
A)

B)

C)

D)

Refer to the exhibit.

Criteria
1. All outbound traffic to AS 64516 prefers Edge-2 to AS 64516
2. All other outbound traffic prefers Edge-1 to AS 64513
Given the customer connectivity depicted in the diagram which single change can be performed on Edge-2 to ensure the criteria are met?
After a Proof of Concept where NetEdit was used to troubleshoot the network, the customer agrees that NetEdit meets some of its technical goals.
Which technical goals does NetEdit meet? (Select two.)
A customer is having a performance issue on the network and has received complaints about users experiencing Intermittent connectivity. After performing a packet capture, It is determined that there is unwanted UDP port 68 traffic being broadcast
6300W%wit
To mitigate this issue, which ArubaOS-CX 6300M switch feature would be best to implement?
The rate-limiting QoS feature can be implemented on all ArubaOS-CX platforms However, some features are platform dependent. Which statements are true ' ' (Select two.)
A network administrator has deployed the following (partial) configuration:

What is the effect of this policy?
Refer to the exhibit.

A customer has implemented this ArubaOS-CX solution. NetEdit is not present. After a while, the secondary node of the VSX-cluster fails. What is the correct procedure to replace the failed node as quickly as possible?
With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use.

What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway ' ' (Select two.)
Refer to the exhibit.

You want to protect the aggregation layer if the VSXISL falls. Where should you place a VSX keepalive link?
Match the repotted status to the Aruba 8325 issue (Each option may Be used once more than once, or not at all)

(Scenarios may contain multiple errors which may or may not Impact the solution)
Refer to the exhibit.

An engineer has attempted to configure two pairs of switches in the referenced configuration, it is required to implement Multi-Chassis Link Aggregation for each pair of switches
The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows:
There is an error message staling " incompatible interface. " Which interfaces are the cause of the error? (Select two.)
Which functionalities of ClearPass can be added in a wired network that implements dynamic segmentation? (Select two.)

