HPE6-A75 Aruba Certified Edge Professional Exam Questions and Answers

AP names, AP groups, controller names, and controller groups

AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)

AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)

Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

The NAD should be configured with the primary node IP address for RADIUS authentication on the 802.1x network.

A new Virtual IP address should be created for each NAD.

Both the primary and secondary nodes will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The primary node will respond to authentication requests sent to the Virtual IP address when the primary node is active.

The NAD should be configured with the Virtual IP address for RADIUS authentications on the 802.1x network.

It authenticates guest users based on the password the users enter hi the portal.

It encrypts and secures the RADIUS messages that the AOS-Switch sends to ClearPass.

It does not let users alter the URL that redirects them to the portal.

It specifies the captive portal URL and conceals the setting in the config.

It must participate in a new election for the Designated Router and Backup DR.

It must initiate a graceful restart timer.

It must re-establish adjacency with its Designated Router and Backup DR.

It must run the shortest path first algorithm.

Enable the multihop option for the neighbor on each of the switches.

Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.

Enable BGP on the interfaces that the switches use to reach each other.

Set the update source for the neighbor to the local loopback interface on each switch.

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

The Endpoint Profiler uses DHCP fingerprinting for device categorization.

Data obtained from the Endpoint Profiler can be used in Enforcement Policy.

Endpoint Profiler requires a profiling license.

The Endpoint Profiler requires the Onboard license to be enabled.

The Endpoint Profiler can only categorize laptops and desktops.

a hardware issue, such as a broken cable

asymmetric routing introduced by a routing configuration error

an issue with queuing, caused by mismatched QoS settings

mismatched IP addresses on the VLAN for the link

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

for ClearPass to send a TACACS+ request to the NAD

for appending to the Web Login URL, before the page name

for the client to POST the user credentials to the NAD

for ClearPass to send a RADIUS request to the NAD

for appending to the Web Login URL, after the page name.

When we have to assign a vlan to a wired user on a third party wired switch that doesn't support RADIUS return attributes.

When we have to assign a VLAN to a wired user on an Aruba Mobility Access Switch.

When we have to assign a VIAN to a wired user on an Aruba Mobility Controller.

When we have to assign a VLAN to a wired user on a third party wired switch that doesn't support RADIUS authentication.

When we have to assign a VLAN to a wireless user on an Aruba Mobility Controller.

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C1.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C1, and the user’s A-UAC remains on C2.

The AP3’s A-AAC switches to C2, and the user’s A-UAC remains on C1.

AirMatch

Clustering

ARM

Zones

Redirect the wired port traffic to an AP-to-controller GRE tunnel.

Convert the campus AP into a RAP.

Enable AP encryption for wired ports.

Enable IPSec encryption on the AP’s wired ports.

to enforce role based access control for Aruba Controllers

to enforce role based access control for ClearPass Policy Manager admin users

to enforce role based access control for ClearPass Guest Admin users

to assign ClearPass roles to guest users

to map AD attributes to admin privilege levels in ClearPass Guest