IN101_V7 BICSI Installer 1 Exam Questions and Answers

Which of the following tend to cause sheath damage during cable pulling?

How long does it take someone to form a first impression?

How much sheath of the cable needs to be removed in order to properly terminate an 8P8C?

Which of the following PPE items MUST be worn at all times when you are working with or handling OF?

During a retrofit, an installation crew discovers old insulation that they think may contain asbestos, they cannot complete their work without disturbing the insulation. What is the best course of action for the crew to take?

What is the size of a rack-mounted unit (RMU)?

What is the markings for non-conductive optical fiber riser cable?

Which of the following is the primary benefit of using wall-mounted racks and cabinets in place of traditional equipment racks?

A third 90-degree bend may be permitted in a conduit run if the run does NOT exceed ______?

Which of the following topologies is the recommended topology for distribution systems in campus environments?

Which type of optical fiber cable should be color coded with a RED outer cable sheath?

Which tool is required to pull backbone cable of significant weight?

What is the maximum allowable horizontal cable length?

Which of the following attachment methods does BICSI recommend for attaching coaxial connectors to coaxial cable?

Which of the following steps should be performed first when terminating a coaxial cable?

What is the specified performance level for Category 6 cable?

Unqualified workers must stay AT LEAST ____ from exposed energized conductors operating at 300 to 50,000 V.

Which of the following terms describes the unwanted signal coupling from a disturbing pair of a 4-pair cable channel to a disturbed pair of another 4-pair channel?

Which of the following should be used to install plywood in a telecommunications room if the edge of the board does NOT align with the wall studs?

If the situation requires, a conduit should be terminated _______ the plywood backboard?

Which of the following interconnects the PBB to the SBB?

Which of the Two organizations jointly oversee the worldwide standardization of telecommunications cabling?

Which of the following fire-ratings provides information about smoke leakage?

Which phase of testing includes documenting the test results?

Which of the following is used to establish a 0 volt (V) reference for ac electrical power systems?

A third 90-degree bend may be permitted in a conduit run if the run does NOT exceed ______?

Which of the following quantifies the bandwidth of a cabling system in a frequency range of interest?

Which of the following markings is used for non-conductive optical fiber general-purpose cables?

Which of the following items may be used as a substitute device for a pulling eye?

What is the recommended minimum amount of aisle space between and around equipment?

Which of the following steps should be performed first when an installer is pulling backbone cable from the bottom up?