INST1-V8 BICSI Installer 1 Exam Questions and Answers

Which of the following tools is a low-cost cable verifier that can be used to test for opens, shorts, crossed pairs, and miswires in 4- pair cables?

What is the maximum allowable horizontal cable length?

Which of the following steps should be performed first when an installer is pulling backbone cable from the bottom up?

A category 8 cable is terminated into category 6A outlets with category 5e patch cords. What is the maximum supported performance level?

Which of the following items may be used as a substitute device for a pulling eye?

If you are working on a catwalk, you are required to wear _____?

What is the most appropriate administration class for an infrastructure with multiple telecommunications spaces within one building?

During a retrofit, an installation crew discovers old insulation that they think may contain asbestos, they cannot complete their work without disturbing the insulation. What is the best course of action for the crew to take?

Which type of cabling is installed between a main cross-connect (campus distributor) and an intermediate cross-connect (building distributor)?

How many cycles are in 10Hz?

During the troubleshooting phase, what is the first step?

Which of the following attachment methods does BICSI recommend for attaching coaxial connectors to coaxial cable?

Which is a keyed, contact, moderate loss connector in present use today that is pull & wiggle-proof?

Which tool is required to pull backbone cable of significant weight?

What is the specified performance level for Category 8 cable?

Which of the following PPE items MUST be worn at all times when you are working with or handling OF?

Which of the following markings indicates that the cable is designed for use in a plenum space?

Which of the following terms describes the unwanted signal coupling from a disturbing pair of a 4-pair cable channel to a disturbed pair of another 4-pair channel?

Two truck drivers are communicating over a Citizens Band (CB) radio. Only one driver can send a message at a time with this system.

What type of transmission method is used in this example?

What is the minimum number of consolidation points that should serve an open office furniture cluster?

Volts are measurement of _______?

Electrical power (P) is measured in ___________?

A purple backboard should be used to identify ________?

Fall protection is required whenever a person is exposed to a fall hazard more than ____?

You are terminating a category 3 cable. What is the maximum permissible amount of untwisting?

Unqualified workers must stay AT LEAST ____ from exposed energized conductors operating at 300 to 50,000 V.

What type of coaxial cable is used for video backbone distribution?

What is the minimum recommended height that should be used when mounting a plywood back board in a telecommunication space?

Which of the following types of cable produces very little smoke when burned?

Which of the following is used to measure the length of a 4-pair cable?

Which of the following is designed to provide protection from harmful chemicals?