Black Friday Flash Sale: Get 70% Off! Use coupon code below to save big on all exam bundles! Use coupon code below to save on all exam bundles!
Code: bestfriday
Ends in: 0d 00h 00m 00s

Free Practice Questions for the Netapp NAHSE NS0-094 Exam (2026 Updated)

At Marks4sure, we are dedicated to providing IT professionals with the most accurate and reliable preparation materials for the Netapp NS0-094 exam. To support your certification journey, we have made a selection of our premium 2026 NAHSE practice questions and answers available completely free. You can take this practice test as many times as you need. Every question includes a detailed, expertly verified explanation to ensure you fully grasp the core security concepts before test day.

Questions 4

You have replaced a failed boot device. You perform boot_recovery and receive no errors. However, when the node reboots, it reports that it has no disks.

What are two possible causes? (Choose two.)

Options:

A.

The SAS cables were incorrectly reconnected after reinstalling the motherboard.

B.

The disks that are owned by this node have been marked as failed.

C.

The node is booting a lower version of ONTAP software than was last used.

D.

The interconnect is down.

Buy Now
Questions 5

In which two sections of AutoSupport can you find information to analyze the following panic? (Choose two.)

Panic_Message: PCI Error NMI from device(s):ErrSrcID(CorrSrc(0xf00),UCorrSrc(0x18)), RPT(0,3,0):Qlogic FC 16G adapter in slot 1 on Controller

Options:

A.

HA-RASTRACE.TGZ

B.

ALL-COREDUMP.XML

C.

SSRAM-LOG

D.

PCI-HIERARCHY.XML

Buy Now
Questions 6

A 4-node NetApp ONTAP cluster sent an alert that one of the cluster interconnect switches has failed. After replacement, the system administrator notices that half of the cluster LIFs are not on their home ports.

Which parameter must the system administrator enable to automatically migrate the cluster LIFs?

Options:

A.

failover-policy

B.

auto-revert

C.

allow-lb-migrate

D.

home-port

Buy Now
Questions 7

Which two commands from the Service Processor can provide information about installed field replaceable units (FRUs)? (Choose two.)

Options:

A.

system fru list

B.

system fru show

C.

system sensors show

D.

system power status

Buy Now
Questions 8

Where is a kernel core file stored on a FAS9000 system that is running ONTAP 9.12.1 software?

Options:

A.

on the partner root aggregate

B.

on the root aggregate

C.

on the mailbox disk

D.

on the boot device

Buy Now
Questions 9

Which of the following scenarios could result in a NetApp WAFL inconsistency in a RAID DP aggregate?

Options:

A.

two disks failing and a block error during reconstruction

B.

rebooting a node during a disk reconstruction

C.

two disks failing within seconds of each other

D.

both party disks failing

Buy Now
Questions 10

Which RAID type provides protection against three disk failures?

Options:

A.

RAID DP

B.

RAID-TEC

C.

RAID 5

D.

RAID 4

Buy Now
Questions 11

A node has panicked with a PCI/NMI error. Giveback has not been performed.

Which two commands should you run to collect the logs to determine the cause? (Choose two.)

Options:

A.

pelog –a –g=2

B.

show pci –v

C.

rdfile /mroot/etc/log/SSRAM

D.

event log show

Buy Now
Questions 12

Which two of the following methods are valid ways to access a node which is not booting? (Choose two.)

Options:

A.

node management port

B.

cluster management port

C.

Service Processor

D.

serial console

Buy Now
Questions 13

During which two operations is the NVRAM replayed by the high-availability (HA) partner? (Choose two.)

Options:

A.

after triggering a sync core

B.

when a node is halted

C.

during a negotiated takeover

D.

when the node loses power

Buy Now
Questions 14

You have a NetApp ONTAP cluster that is serving both SMB over 10Gbe and FC data. An application owner has started to complain about poor performance and asks you to research the issue. When looking through EMS messages, you see the following output:

NS0-094 Question 14

Which defective component triggers the EMS message?

Options:

A.

10Gbe module

B.

fiber cable

C.

32G FC module

D.

adapter card in slot 2

Buy Now
Questions 15

During a new SVM deployment, all of the FC LIFs are showing an admin/oper status of up/down. The LIF extended status is Waiting for Link.

What is causing this status?

Options:

A.

The FC cables are bad.

B.

The sync-destination LIF is in switchover state.

C.

NPIV is disabled on the switch.

D.

The switch fabric is not configured.

Buy Now
Questions 16

A node has failed.

Which two conditions must be met for an automatic takeover to be triggered? (Choose two.)

Options:

A.

The combined utilization of both nodes must be less than 100%.

B.

The cluster network must be available.

C.

Mailbox disks must be reachable.

D.

NVRAM must be synchronized.

Buy Now
Questions 17

Which two commands confirm whether an aggregate is WAFL inconsistent? (Choose two.)

Options:

A.

wafiron show < aggregate >

B.

node run –node < node > sysconfig –r

C.

storage aggregate show

D.

node run –node < node > sysconfig –a

Buy Now
Questions 18

What is the default amount of time that a volume is available for recovery from the volume recovery queue following a volume deletion?

Options:

A.

12 hours

B.

48 hours

C.

72 hours

D.

24 hours

Buy Now
Questions 19

Which two statements regarding drive 1.2.3.L1 are true? (Choose two.)

Options:

A.

The drive is in shelf 2.

B.

The drive is in bay 3.

C.

The drive is in bay 2.

D.

The drive is in shelf 1.

Buy Now
Questions 20

A SAS connection is reporting a single PHY down.

What are the two most likely causes? (Choose two.)

Options:

A.

improperly seated cable

B.

outdated I/O module (IOM1 firmware

C.

defective cable

D.

an offline shelf in the stack

Buy Now
Questions 21

You receive the following AutoSupport message:

[Node-01: cshmd: hm.alert.raised:alert]:

Alert Id = ClusterSwitchConnectivity_Alert

Alerting Resource = Node-02

raised by monitor ethernet-switch

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

[Node-01: mgwd: callhome.hm.alert.major:alert]:

Call home for Health Monitor process cshm:

ClusterSwitchConnectivity_Alert[Node-02].

When researching, you discover the following output:

Exhibit 2 — Network Port Health

Cluster::* > network port show

-health-status degraded

-fields health-degraded-reasons

node port health-degraded-reasons

-------- ---- -----------------------

Node-02 e0a link_flapping

What action do you take to resolve this issue?

Options:

A.

Replace the SFP on port e0a on node-02.

B.

Update the RCF file on the cluster switches.

C.

Update the firmware on the cluster switches.

D.

Replace the SFP on port e0a on node-01.

Buy Now
Questions 22

You are troubleshooting an L2 connectivity problem, and you want to analyze network traffic.

Which command do you use to capture network packets?

Options:

A.

traceroute

B.

netstat

C.

ping

D.

tcpdump

Buy Now
Questions 23

In the latest MANAGEMENT LOG AutoSupport message, you try to inspect the ENVIRONMENT section but find it empty.

In which section of AutoSupport can you find the reason?

Options:

A.

AUTOSUPPORT-BUDGET.XML

B.

HEADERS

C.

AUTOSUPPORT-HISTORY.XML

D.

MANIFEST.XML

Buy Now
Questions 24

A storage administrator is troubleshooting a 4-node cluster, where one node is reporting “cluster port is down” alerts. The node has recently been recabled to new cluster switches. The cluster ping-cluster command shows communication failures between the affected node and its partners over the cluster network. All physical cables have been verified as properly seated and undamaged.

Which configuration is causing this problem?

Options:

A.

The MTU size on the new cluster switches is mismatched with the nodes.

B.

An incorrect gateway is defined for the management network.

C.

An incorrect intercluster LIF is configured.

D.

The SVM data LIFs are on the wrong ports.

Buy Now
Exam Code: NS0-094
Exam Name: NetApp Hardware Support Engineer Professional Exam
Last Update: Nov 19, 2026
Questions: 81

PDF + Testing Engine

$55.71   $185.69

Testing Engine

$42.85   $142.83

PDF (Q&A)

$47.13   $157.11