Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65

NS0-527 NetApp Certified Implementation Engineer - Data Protection Questions and Answers

Questions 4

Application data needs to be replicated between two FAS9000 clusters running ONTAP 9.7 for DR purposes only. The appl ication has 50 data volumes to be replicated concurrently. You also require that the application can run from the DR site should the production site suffer a disaster.

NS0-527 Question 4

Referring to the exhibit, what would you use to satisfy the requirements?

Options:

A.

SnapVault backups can be used to replicate all the application volumes.

B.

Load sharing can be used to concurrently replicate the data between both systems.

C.

SnapMirror Synchronous can be used to replicate the all the application volumes.

D.

SnapMirror can be used to replicate all the data volumes concurrently.

Buy Now
Questions 5

Exhibit:

NS0-527 Question 5

Referring to the exhibit, You have a MetroCluster IP solution that uses Cisco Nexus 3232C back-end switches for a maximum ISL distance of 700 km. What is the maximum round trip ISL latency that is supported in this scenario?

Options:

A.

7 ms

B.

10 ms

C.

14 ms

D.

20 ms

Buy Now
Questions 6

You are configuring a SnapMirror replication between a source volume with adaptive compression enabled and a destination volume with secondary compression enabled.

In this scenario; which statement is correct?

Options:

A.

Blocks are uncompressed at the source and transferred to the destination.

B.

Logical replication with storage efficiency is used.

C.

Storage efficiency (compressed and deduplicated blocks) is preserved during data transfer.

D.

Data is recompressed using the source volume’s compression type.

Buy Now
Questions 7

A customer wants to set up SNMP to monitor their ONTAP platforms. Because of security reasons, they need strong authentication and data encryption?

In this scenario, which SNMP version satisfies these requirements?

Options:

A.

v1

B.

v3

C.

v2

D.

v2c

Buy Now
Questions 8

Which NetApp technology helps to protect against ransomware attacks?

Options:

A.

SnapLock

B.

SyncMirror

C.

NetApp Volume Encryption

D.

NetApp Aggregate Encryption

Buy Now
Questions 9

A company has a 4-node FAS9000 fabric MetroCluster cluster separated by 101 km. Site A has an unmirrored HDD aggregate. An FC-VI card fails in one of the nodes in site A and a switchover occurs.

Which statement is correct in this scenario?

Options:

A.

The aggregate is accessible using Site A's surviving node.

B.

Only SSD aggregates are accessible.

C.

The distance is not supported.

D.

The aggregate is accessible using Site B's cluster.

Buy Now
Questions 10

A customer has a MetroCluster solution and wants to automate the disaster-recovery process. The customer wants to control the switchcover between the sites.

Which NetApp tool would satisfy these requirements?

Options:

A.

OnCommand Unified Manager

B.

MetroCluster Tiebreaker

C.

OnCommand System Manager

D.

OnCommand SnapCenter

Buy Now
Questions 11

Your customer is running an older cluster that uses Data ONTAP 8.1 Cluster-Mode. They would like to create a SnapMirror relationship with their new ONTAP 9.5 cluster.

In this scenario, what must the customer do to create the SnapMirror relationship?

Options:

A.

The customer can create a DP type SnapMirror relationship without needing to perform an upgrade.

B.

The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP 9.1 and then create the XDP SnapMirror relationship.

C.

The customer must first upgrade the Data ONTAP 8.1 Cluster-Mode storage array to at least ONTAP 8.3 and then create the XDP SnapMirror relationship.

D.

The customer can create a XDP type SnapMirror relationship without needing to perform an upgrade.

Buy Now
Questions 12

Which two configurations would be used to protect volumes in a production ONTAP system at two different disaster recovery (DR) locations? (Choose two.)

Options:

A.

SnapMirror in a fan-out topology

B.

SVM DR in a cascade topology

C.

SnapMirror in a cascade topology

D.

SVM DR in a fan-out topology

Buy Now
Questions 13

You are given the vsadmin account credentials for an SVM that is delegated to you by your organization’s shared services group. You are asked to verify that all of the volumes in your SVM are protected with SnapMirror.

In this scenario, what would you use to accomplish this task?

Options:

A.

OnCommand System Manager

B.

OnCommand Unified Manager

C.

XCP

D.

CLI

Buy Now
Questions 14

Click the Exhibit button.

NS0-527 Question 14

Using the NetApp Cloud TCO calculator, a customer wants to determine whether running Cloud Volumes ONTAP in Azure will be more cost effective than running native cloud services.

Referring to the exhibit, which action would satisfy the requirement?

Options:

A.

Turn off High Availability.

B.

Change the Azure VM Type to DS3_V2.

C.

Turn on Tier to Azure Blob.

D.

Change the Azure VM Type to DS14_V2.

Buy Now
Questions 15

Your customer wants to implement SVM DR, but the customer is not certain whether the identity-preserve parameter should be enabled. The customer explains that the source and destination clusters are in different network subnets.

In this scenario, which SVM DR solution should the customer use?

Options:

A.

SVM DR using the identity-preserve parameter disabled and the default SnapMirror policy.

B.

SVM DR using the identity-preserve parameter enabled and then administratively take the data LIFs offline on the DR cluster.

C.

SVM DR with the identity-preserve parameter enabled and a SnapMirror policy with the discard-configs network parameter.

D.

SVM DR with the identity-preserve parameter enabled and the default SnapMirror policy.

Buy Now
Questions 16

You want to modify the existing Snapshot copy schedule to allow for more granularity in your ability to recover data after a corruption or loss.

In this scenario, which two tools allow you to accomplish this task (Choose two.)

Options:

A.

OnCommand System Manager

B.

OnCommand Unified Manager

C.

NetApp SnapCenter

D.

ONTAP CLI

Buy Now
Questions 17

A customer wants to set up an SVM DR relationship to protect a source SVM that is dedicated for NAS file services. The source and destination clusters are running ONTAP 9.5.

In this scenario, which application accomplishes this task?

Options:

A.

OnCommand Unified Manager

B.

OnCommand System Manager

C.

SnapCenter

D.

Snap Creator

Buy Now
Questions 18

You have a network outage that affects client access to site

Options:

A.

You need to temporarily reverse the SnapMirror relationship of a volume to serve data from site B. Which two steps must you perform first?

(Choose two.)

B.

Take the source volume offline.

C.

Break the SnapMirror relationship.

D.

Delete the SnapMirror relationship.

E.

Abort the SnapMirror relationship.

Buy Now
Questions 19

Click the Exhibit button.

NS0-527 Question 19

Referring to the exhibit, what two Search Criteria check boxes need to be used to provide a supported solution for protecting Windows Server 2019 DCE 64-bit, x64 host using local NetApp LUNs with SnapCenter Server 4.1.1? (Choose two.)

Options:

A.

SnapCenter Application Plugin

B.

SnapCenter Host Plugin

C.

Browser

D.

Host OS (OS)

Buy Now
Questions 20

You are the administrator of an ONTAP cluster, where the majority of users are using Linux machines with home directories mounted using NFS. You keep six daily, four weekly, and one monthly Snapshot copy locally. However, you do not replicate the data to another instance of ONTAP. One of your users reports having accidentally deleted a file, but does not remember the self-serve restore procedure.

How does the user restore the file without having administrator privileges on the cluster?

Options:

A.

Issue the snapshot restore-file command.

B.

Copy the deleted file from the .snapshot directory.

C.

Issue the volume snapshot restore command.

D.

Using ONTAP System Manager, restore the volume from a Snapshot copy.

Buy Now
Questions 21

A customer is using SnapCenter and they want to see details about: 1.) unprotected databases outside of resource groups, 2.) databases that have not been backed up during the report period, 3.) databases that belong to a resource group for which backups have failed, and 4.) the database SnapVault status.

In this scenario, which report type satisfies the requirements?

Options:

A.

Backup Report

B.

Clone Report

C.

Plug-in Report

D.

Restore Report

Buy Now
Questions 22

Click the Exhibit button.

NS0-527 Question 22

In an ONTAP environment, an SVM-DR relationship exists between your AFF A220 cluster and your FAS2720 cluster, with identity preserve enabled. You are asked to test the disaster recovery workflow in an upcoming maintenance window.

Referring to the exhibit, which step should be performed next to test the recovery workflow?

Options:

A.

Delete the SVM-DR relationship.

B.

Pause any ongoing transfers.

C.

Abort any ongoing transfers.

D.

Update any ongoing transfers.

Buy Now
Questions 23

Click the Exhibit button.

NS0-527 Question 23

Referring to the exhibit, which two statements are true? (Choose two.)

Options:

A.

The source volume is available for I/O.

B.

A manual re-synchronization is not needed.

C.

The source volume is unavailable for I/O

D.

A manual re-synchronization is needed.

Buy Now
Questions 24

You have a NAS volume that contains 250 GB of data with a daily change rate of 10%. You want to keep seven daily Snapshot copies.

In this scenario, what should the minimum copies of the volume be?

Options:

A.

325 GB

B.

550 GB

C.

250 GB

D.

425 GB

Buy Now
Questions 25

You want to set up an important management solution that must comply with FIPS 140-2. The solution should support a multi-clusters environment and should provide centralized management of the encryption keys.

In this scenario, which solution accomplishes the task?

Options:

A.

NetApp Storage Encryption (NSE) with external key management using the Key Management Interoperability Protocol (KMIP)

B.

NetApp Volume Encryption (NVE) with onboard key manager using the Key Management Interoperability Protocol (KMIP)

C.

NetApp Storage Encryption (NSE) with onboard key manager using the Key Management Interoperability Protocol (KMIP)

D.

NetApp Volume Encryption (NVE) with external key management server using the Key Management Interoperability Protocol (KMIP)

Buy Now
Questions 26

Click the Exhibit button.

NS0-527 Question 26

You are asked to set up a SnapMirror relationship to protect some Oracle DB volumes on both nodes of the aff-01 and aff-02 clusters. You are using the 1 Gb network and the other nodes all have free space to support the mirror.

Referring to the exhibit, which two nodes would provide the least network transfer time for the relationship? (Choose two.)

Options:

A.

aff-01 to tme-ontap-prd-01

B.

aff-02 to tme-ontap-prd-02

C.

aff-02 to ontap9-tme-8040-02

D.

aff-02 to ontap9-tme-8040-01

Buy Now
Questions 27

You are asked to implement a NetApp solution that has high availability with transparent failover between two data centers.

Which two solutions satisfy this requirement? (Choose two.)

Options:

A.

ONTAP Select

B.

SnapVault

C.

SnapMirror Sync

D.

MetroCluster

Buy Now
Questions 28

You are asked to provide a solution that will allow a client to copy the data stored in a FlexVol volume to a remote tape system for archiving. You are using a cluster-aware backup application to perform this task.

Which three actions are required when you configure this solution for your client? (Choose three.)

Options:

A.

Configure NDMP at the SVM level.

B.

Configure multiple LIFs for SVM-scoped NDMP.

C.

Configure NDMP at the node level.

D.

Create a backup user account on the cluster.

E.

Configure a LIF for node-scoped NDMP.

Buy Now
Questions 29

An administrator notices that a NAS volume has been filled completely by active data and Snapshot copies that have expanded over the Snap reserve. The volume is no longer writable.

In this scenario, which two actions must you take to make the volume writable again? (Choose two.)

Options:

A.

Delete Snapshot copies until space is available.

B.

Delete the files in the active file system.

C.

Delete the SnapMirror relationships.

D.

Delete the SnapVault relationships.

Buy Now
Questions 30

Click the Exhibit button.

NS0-527 Question 30

Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?

Options:

A.

Disconnect the HA connection between the nodes.

B.

Reboot aff-02 to resolve the LIF issue.

C.

No additional action is necessary.

D.

Move the LIFs to their home ports.

Buy Now
Questions 31

Which two statements are correct about configuring a peering connection between clusters? (Choose two.)

Options:

A.

The LIFs should be on the same subnet.

B.

You must use at least one intercluster LIF per node.

C.

You must use one cluster LIF per node per network.

D.

The intercluster LIFs must have full connectivity to each other.

Buy Now
Questions 32

During NDMP incremental backups, you want to reduce the time spent finding the changed data between two Snapshot copies.

In this scenario, which ONTAP feature will accomplish this task?

Options:

A.

compaction

B.

deduplication

C.

SnapDiff

D.

SnapLock

Buy Now
Questions 33

You are the administrator of an ONTAP 9.7 cluster. You configured an hourly Snapshot schedule for all volumes. One of your users accidentally deleted an important spreadsheet file on an SMB share. This file must be restored within a minimum amount of time.

Which two actions satisfy this requirement? (Choose two.)

Options:

A.

On the cluster CLI, issue the volume clone restore command.

B.

On the cluster CLI, issue the volume snapshot restore-file command.

C.

In Windows Explorer, right-click on the SMB share where the file was deleted, go to "Previous Versions" and select the file, then copy it to the original location.

D.

In ONTAP System Manager, navigate to the volume where the share resides, click on "Snapshot Copies" and restore the latest Snapshot copy.

Buy Now
Questions 34

You have an environment with multiple database servers that are performing scheduled nightly dumps. These dumps vary in both the time to complete and the size of data produced. You need to ensure that there is always enough room in the volume for the data and that a nightly SnapMirror update does not take place until the database dump process is complete.

In this scenario, which NetApp tool ensures that this process is completed every night?

Options:

A.

OnCommand Unified Manager

B.

OnCommand Insight

C.

OnCommand Workflow Automation

D.

OnCommand System Manager

Buy Now
Questions 35

You want to generate performance-related reports and alerts using the OnCommand Unified Manager 6.x server. Which two additional tasks must be completed to enable these features?

(Choose two.)

Options:

A.

Create a local user with limited Event Publisher role privileges

B.

Install and configure OnCommand Workflow Automation.

C.

Configure a connection between the Unified Manager server and OnCommand System Manager.

D.

Configure a connection between the Unified Manager server and a Performance Manager server.

Buy Now
Questions 36

Click the Exhibit button.

NS0-527 Question 36

Referring to the exhibit, which three would be used to configure the three-way Data Center Disaster Recovery topology replication schedules? (Choose three.)

Options:

A.

Active IQ Unified Manager

B.

Active IQ

C.

ONTAP CLI

D.

ONTAP Select

E.

ONTAP System Manager

Buy Now
Questions 37

A client is planning to configure a SnapMirror relationship between two sites. Normally their ISP provides network throughput of 100 Mbps; however, they can arrange to have this burst to 1 Gbps for a period of time at an additional cost.

Their intention is to back up 400 GB of Snapshot data each day using the burst option to keep the replication time to a minimum. In this scenario, how much burst time do they need to purchase?

Options:

A.

15 minutes

B.

30 minutes

C.

45 minutes

D.

60 minutes

Buy Now
Questions 38

You want to determine the amount of cold data that can be tiered from a FabricPool-enabled aggregate.

In this scenario, which feature satisfies this requirement?

Options:

A.

Inactive Data Reporting

B.

Information Lifecycle Management

C.

Object Store Profiler

D.

Auto Balance

Buy Now
Questions 39

A customer has a new cloud strategy. They want to replicate mission-critical SAN volumes to the cloud for DR. Which NetApp technology satisfies the requirement?

Options:

A.

Cloud Sync service

B.

Fabric Pool technology

C.

Cloud Volumes Service

D.

Cloud Volumes ONTAP

Buy Now
Questions 40

A customer wants to assign a user to a build-in SnapCenter RBAC Role that will allow them to review and start existing SnapMirror processes only.

In this scenario, which Role will allow the customer to accomplish this task?

Options:

A.

App Backup and Clone Admin

B.

Infrastructure Admin

C.

Backup and Clone Viewer

D.

SnapCenter Admin

Buy Now
Questions 41

You want to ensure that you are using compatible hardware and software versions with your MetroCluster installation. Which tool would accomplish this task?

Options:

A.

Hardware Universe

B.

System-Level Diagnostics tool (SLDIAG tool)

C.

OneCollect

D.

Interoperability Matrix Tool

Buy Now
Questions 42

You are monitoring data protection relationships of type XDR using OnCommand System Manager running ONTAP 9.5. In the GUI, you click Protection - > Volume Relationships.

In this scenario, which status in the Relationship State field must be displayed to ensure that the relationships are working as expected?

Options:

A.

SnapMirrored

B.

Uninitialized

C.

InSync

D.

Quiesced

Buy Now
Questions 43

You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.

In this scenario, which two statements are true? (Choose two.)

Options:

A.

In Sync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.

B.

In StrictSync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.

C.

In Sync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.

D.

In StrictSync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.

Buy Now
Questions 44

A FAS2750 cluster administrator experiences network issues during replication updates that pass over a low- bandwidth WAN link to their DR site. They also replicate locally to another cluster for testing and development. The administrator wants to enable network compression only on the existing WAN Link SnapMirror jobs.

In this scenario, which statement is correct?

Options:

A.

Network compression must be enabled when initializing the replica, the current jobs need to be deleted and new ones created.

B.

Network compression is a global option and it cannot be used.

C.

The current DR transfers must be aborted and the option enabled on each job, then resume the transfer.

D.

Network compression is possible but not on a FAS2750.

Buy Now
Questions 45

Which two NetApp features would help you to recover from a file share that was encrypted by a ransomware event? (Choose two.)

Options:

A.

SnapLock

B.

SnapMirror

C.

SnapRestore

D.

Snapshot

Buy Now
Questions 46

You must determine if there have been any backup problems overnight. Which two reports in OnCommand Unified Manager 6.2 would provide you with the required information?

(Choose two.)

Options:

A.

Unresolved Incidents and Risks area

B.

On Command Unified Manager Dashboard

C.

On Command Cluster Events Details

D.

On Command Job Events Details

Buy Now
Exam Code: NS0-527
Exam Name: NetApp Certified Implementation Engineer - Data Protection
Last Update: May 17, 2026
Questions: 156

PDF + Testing Engine

$64.99  $185.69

Testing Engine

$49.99  $142.83
buy now NS0-527 testing engine

PDF (Q&A)

$54.99  $157.11
buy now NS0-527 pdf