Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65
marks4sure logo
Which of the following resources can be used to analyze and optimize NetBackup performance?
Which guide should be consulted to learn about the configuration and administration of NetBackup deduplication options?
Which of the following specialized backup solutions is used to reduce backup time and network bandwidth by backing up only the changed blocks of data between successive full backups?
Refer to the exhibit.
Two media servers, sharing a library with 6 tape drives, exist in the NetBackup environment displayed in the exhibit. Both weekly Full and daily Differential Incremental backups need to run for the clients and each schedule has a different retention period. Because of network topology, some clients back up to Media server 1 and some back up to Media server 2. The environment suffers from multiple status 96 failures during the backup window.
How can the administrator minimize the number of failures?
A NetBackup appliance is not backing up data as expected. What steps can be taken to troubleshoot the problem?
A NetBackup appliance is reporting a high network usage. What steps can be taken to troubleshoot the problem?
What is the name of the feature that lets you use a smart card or a digital certificate for single sign-on (SSO) in NetBackup?
What is the name of the feature that lets you configure immutability and indelibility of data in NetBackup?
Which command should an administrator run on each appliance as part of completing the pre-upgrade tasks?
A NetBackup appliance is reporting a high CPU usage. What steps can be taken to troubleshoot the problem?
Which method is NOT able to provide performance information for previously run backup jobs?
What is the name of the feature that lets you recover the NetBackup catalog in case of a disaster?
After creating a NBU-Catalog type backup policy, an administrator receives the following message:
DR file is on the same partition as your catalog and will be unusable in an actual disaster or disk failure.
Which two options are available to the administrator to ensure the DR file is available for future use? (Choose two.)
What is the certificate deployment and management behavior when the security level is set to High?
A NetBackup restore job has failed with the status code 702. What does this status code mean?
What are the two types of backup duplication solutions that NetBackup supports?
What is the name of the NetBackup web interface that lets you manage and protect cloud assets and configure cloud storage in NetBackup?
What is the name of the command that lets you view the status codes and their descriptions in NetBackup?
What is the benefit of using the staging schedule option in the Change Storage Units dialog box in NetBackup?
Which of the following is NOT a best practice for securing NetBackup appliances?
An administrator has a master server named master1. When the administrator runs the bpclntcmd -pn command on the client, the administrator receives the following output:
bpclntcmd -pn
expecting response from master2
client_01.domain.com client_01 192.168.0.30 3815
What is a possible cause for this output?
What are the two types of cloud storage that NetBackup supports for backup data?
Refer to the exhibit.
Which diagram is supported for backups spanning BasicDisk storage?
A NetBackup client is reporting an error with the message " Unable to open backup file " . What could be the cause of this error?
Which of the following can be configured using the Appliance Shell Menu (CLISH) and Appliance Web Console?
An administrator is attempting to configure a new backup policy using synthetic backups. When creating a new full backup schedule, the Synthetic backup option is greyed out and therefore unable to be selected.
What must the administrator do to the policy to make the Synthetic backup option available for selection?
An administrator navigates to NetBackup Management > Catalog, and selects Action: Import. After clicking the Search Now button, the following message appears:
INF - Found no images matching the selection criteria that were ready for phase 2 import.
Which step must the administrator perform in order to get search results?
Backup jobs end with the following series of messages in the Job Details:
Error bpbrm (pid=41876) db_FLISTsend failed: Unable to connect to the database (2505)
12/05/2013 15:39:45 - job 63389 was restarted as job 63390
Failed to get status code information (2505)
Which process is failing to respond?
An administrator is adding a new media server appliance to an existing NetBackup appliance master server.
What is the correct sequence to configure the new appliance in the NetBackup domain?
An administrator has a backup policy with the following policy attributes:
• 3 paths listed in the Backup Selections list
• 5 clients listed in the Clients list
• " Allow multiple data streams " is selected
• " Limit jobs per policy " is set to 4
How many jobs go Active when the job is started, excluding parent jobs, assuming there are enough storage resources to
handle the expected jobs?
A NetBackup environment with a single tape storage unit is experiencing performance issues when running full backups of a Windows file server with over a million small files. Backups for all other clients on the same network are performing
adequately. What should the administrator modify to improve performance for the client?
Which feature is enabled after adding a master server to the Trusted Master Servers tab?
A NetBackup client is reporting an error with the message " Unable to connect to the NetBackup server " . What could be the cause of this error?
What is the name of the feature that lets you update NetBackup software and appliance firmware from a centralized location?
A NetBackup catalog has been corrupted. What steps can be taken to recover the catalog?
What are the two types of log files that record all activities related to NetBackup appliance security? A. security.log and audit.log
B. secure.log and auth.log
C. security.log and auth.log
D. secure.log and audit.log
What is the default value of Federal Information Processing Standards (FIPS) mode in NetBackup?
Which of the following is NOT a way to obtain NetBackup Appliance updates and EEBs?
What is the name of the plug-in that performs deduplication on the NetBackup client or media server?
Which type of backup schedule is available when using the “After each backup session” schedule type for an NBU-Catalog policy type?
Which interface can be accessed from the IPMI web interface or Veritas Remote Management (VRM) interface?
An administrator is preparing to perform disaster recovery for many clients whose backups are stored on multiplexed tapes.
Which host property should the administrator modify, prior to the restores, to ensure the best recovery time?
An administrator is experiencing a backup failure, which may be due to lack of connection between the media and master server. The status of the media server is shown below:
Media server showing offline
Which command can the administrator run to change the status of the media server?
What is the name of the feature that allows NetBackup to protect workloads in the cloud and on-premises with a single solution?
Which guide should be referred to for configuring backup policies in NetBackup 10.1?
An administrator has a master server running over 50,000 jobs per day.
What can the administrator do to reduce the load on the master server?
Which of the following resources can be used to analyze and optimize NetBackup performance?
An administrator observes intermittent connectivity issues between the appliance and clients.
Which NetBackup Appliance Shell Menu (CLISH) command can the administrator use to assist in diagnosing the problem?
An administrator creates a Storage Lifecycle Policy (SLP) to take advantage of optimized duplication. The backup and subsequent duplication jobs launch as configured in the SLP.
What may cause the secondary duplication job to run as non-optimized?
NetBackup has frozen some of the tapes added to the robot.
Which log must be enabled to determine why the tapes are frozen?
Which of the following is NOT a task that can be performed using Appliance Web Console?
Which storage unit group selection causes NetBackup to choose the least recently selected storage unit in the list as each new job is started?
An administrator is comparing the NetBackup Accelerator and NetBackup FlashBackup features to determine which feature should be used for backup of a very large file system with millions of files.
Which consideration is irrelevant when determining whether to use NetBackup Accelerator or NetBackup FlashBackup in the situation?
A tape library had the robot firmware upgraded, and now the robot is reading the barcodes with additional characters.
How should an administrator enable NetBackup to use the same characters that were used before the firmware upgrade?
An administrator tries to suspend an active job from the NetBackup Activity Monitor, but discovers that the option is grayed out.
What is preventing the administrator from suspending the job?
Which resource should be used for analyzing and optimizing NetBackup Appliances?
A file system on a server that has different files changing daily becomes corrupt, and a restore is required. The system is being backed up using True Image Restore with move detection enabled.
The most recent backups of this file system are displayed below:
Monday: A full backup
Tuesday: A differential incremental backup
Wednesday: A cumulative incremental backup
Thursday: A differential incremental backup
Friday: A differential incremental backup
What is the minimum number of backup images that will be used to fully restore the server to its most current state?
An administrator has a NetBackup Appliance that failed to CALL HOME during an unexpected hard drive failure.
Which two reasons may have prevented CALL HOME from working? (Choose two.)
TESTED 02 May 2026