Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65
marks4sure logo
With Path Selection, what happens to traffic destined for a remote site where no uplinks have been configured?
If the Steelhead Mobile client optimization is being blocked by the client firewall, you must set which port on the client firewall to allow incoming traffic?
The auto-discovery probe uses which TCP option number (in decimal)? (Hint: Use the calculator)
When deploying a SteelHead on an 802.1Q trunk, which one of the following statements is true?
Refer to the exhibit.
Which of the following correctly describes the combination of cable types used in a fail-to-wire scenario for the interconnected devices shown in the exhibit? Assume Auto-MDIX is not enabled on any device.
If an administrator wanted to compare the performance of Microsoft file sharing across the WAN for two clients with and without Riverbed optimization, what strategy could you use to enable this testing?
Automatic registration of devices with the SteelCentral Controller for SteelHead (SCC) requires which one of the following?
Which xx50 Steelhead appliance models provide both inpath0_0 and inpath0_1 interfaces without adding additional network cards? (Select 3)
When optimizing protocols such as signed SMB or encrypted MAPI, which of the following is true?
Which of the possible Simplified Routing modes should be used when installing the SteelHead on an 802.1Q trunk? (Choose three.)
Login to the CMC appliance can be authenticated against what type servers? (Select 3)
A fat pipe is a network that can carry large amounts of data without significantly degrading transmission speed.
If you have a fat pipe that is not being fully utilized and you are experiencing WAN congestion, latency, and packet loss as a result of the limitations of regular TCP, which of the following RiOS features will help? (Select 2)
Which SteelHead optimization feature improves performance over lossy (error prone) links?
What licenses are installed with a Steelhead appliance when purchased? (Select 3)
Which SteelHead feature would resolve the packet ricochet seen in the diagram below?
Log messages in the Steelhead appliance Management Console such as “error=SMB_SHUTDOWN_ERR_SEC_SIG_ENABLED” are an indication of what condition?
What does “Branch managed” mean when adding a SteelHead to the SteelCentral Controller for SteelHead (SCC) inventory?
Your SteelCentral Controller for SteelHead Mobile is running at user license capacity with location awareness configured. No more client licenses can be used. Another client comes online requesting a license and there is no branch SteelHead available. What will happen?
Which report would you use to monitor disk utilization in the SteelHead management console user interface?
What optimization can be performed on HTTPS traffic when SSL optimization is enabled?
When MAPI prepopulation is enabled, what is default TCP keep-alive time used to prepopulate the Steelhead appliance with emails and attachments?
Which of the following status states of the Steelhead appliance are valid? (Select 3)
With branch warming enabled, new data transferred between the Steelhead Mobile client and a server will be populated into: (Select 3)
Assume the SSL server is configured for the default SSL port. Which port has to be specified in the in-path rules of the client-side Steelhead appliance?
When configuring CIFS prepopulation, which of the following parameters must be configured for prepopulation to function? (Select 3)
What do you configure to control optimization on a Steelhead appliance? (Select 2)
Which of the following is a benefit of the Riverbed Services Platform (RSP) on the Steelhead appliance? (Select 2)
After deployment of Steelhead appliances, a certain backup application shows poor bandwidth reduction. After disabling the backup application ' s native compression algorithm, the bandwidth reduction statistics on the Steelhead appliances suddenly improve significantly.
Which of the following are likely causes for the increased bandwidth reduction?
In which menu of the Steelhead Management Console do you configure WAN visibility modes?
Which forms of administrative authentication are supported by the Steelhead appliances?:(Select 3)
Which of the following MAPI application-specific optimizations can be performed by Steelhead appliances?
Some applications are designed to open many TCP connections to accomplish required data transfers. Many of these connections are short-lived, yet each requires significant overhead to initiate communications. What RiOS feature was designed to reduce the overhead of these short-lived TCP connections?
To help secure the server private key on the server-side Steelhead appliance, which of the following features can be used?
What combinations of WAN visibility modes can simultaneously be configured on Steelhead appliances?
A user uploads a Microsoft Word document to a server across the network using the file transfer protocol (FTP). The file has been seen before by the Steelhead appliances that are optimizing the link and so the user experiences warm performance. A second user at the same location downloads the file from the same server using the CIFS protocol. This file transfer can be considered:
Assuming the Steelhead appliance has a 250 GB datastore capacity, by enabling PFS on a supported Steelhead appliance which of the following would be true:
How many in-path rules will a WAN-initiated single connection execute on a Steelhead appliance?
A user downloads a Microsoft PowerPoint presentation from a server across the network. The file has been seen before by both Steelhead appliances that are optimizing the link and so the user experiences warm performance. A second user at the same office has a local copy and adds some pictures then uploads the very same file. This file transfer can be considered:
Which of the following is a valid type of in-path rule on the Steelhead appliance? (Select 3)
What is the default action of a Steelhead appliance when it hits the bandwidth limit?
Application Streamlining in a Steelhead appliance or Steelhead Mobile does what?
How many in-path rules will a LAN-initiated single connection execute on a Steelhead appliance?
Which of the following management or monitoring methods are supported by the Steelhead appliance? (Select 4)
A SteelHead appliance can be configured to send email to alert administrators of alarms and other events. Where is this done in the web interface?
Steelhead appliances models vary by supported bandwidth. This bandwidth refers to:
Data Streamlining is used by the Steelhead appliances and Steelhead Mobile for what?
Which of the following deployment methods can NOT be used simultaneously on a single Steelhead appliance?
In an in-path deployment, when a Steelhead appliance fails to wire, the Steelhead appliance acts as a:
A SteelHead in the datacenter is a server side out-of-path mode. What will the source IP address of the client be, as seen by the server?
The Central Management Console appliance can scale to support a range of Steelhead appliances and is available in the following physical form factor(s):
When optimizing certain application protocols such as business continuity /data replication (BCDR) and Virtual Desktop Infrastructure (VDI), Riverbed often recommends the careful use of which network congestion algorithm?
An employee who has just installed Steelhead Mobile onto her workstation notices that she never gets any reduction. It always says 0%.
The status of the mobile client appears to Be:
Optimization State: Firewalled
Controller Status: Connected
The reason she is seeing 0% reduction statistics is:
Clients connect to which interface on the SteelCentral Controller for SteelHead Mobile?
TESTED 02 May 2026