Cisco 300-640 Dumps Questions Answers

Traffic Analytics and Flow Telemetry are mutually exclusive flow-collection modes within Cisco Nexus Dashboard. Cisco's current Nexus Dashboard documentation identifies both under Flow Collection settings and states that Flow Telemetry must be disabled at the fabric level before Traffic Analytics can be enabled.

Traffic Analytics automatically discovers services and visualizes conversations based primarily on Layer 4 information. It provides visibility into network characteristics such as congestion, latency, and drops, which directly matches the monitoring requirements in the scenario. Cisco's Nexus Dashboard Insights guidance likewise states that if Flow Telemetry is already active, it must first be disabled for the relevant sites before Traffic Analytics is selected.

Delta Analysis is an assurance/comparison capability and is not the mutually exclusive collection mode described here. Connectivity Analysis performs reachability and path-oriented diagnostics. SNMP traps remain a separate event-notification mechanism and are not displaced by Traffic Analytics.

The operational distinction matters because Traffic Analytics and Flow Telemetry use different approaches to flow collection and analysis. An administrator cannot simply enable both collection modes simultaneously and expect them to operate in parallel on the same fabric configuration.

Study Guide Reference: AI Infrastructure Operations and Troubleshooting — Nexus Dashboard monitoring, telemetry, congestion analysis, latency, and packet-drop visibility.

===============

Priority Flow Control is a foundational mechanism used to provide lossless Ethernet behavior for RoCEv2. PFC operates on individual Ethernet priorities and allows a congested receiver or switch to pause transmission for the affected priority while permitting traffic in other classes to continue. Cisco's AI networking guidance explicitly states that PFC is enabled for RoCEv2 traffic to prevent packet drops caused by congestion.

This characteristic is critical for RDMA workloads because packet loss can trigger retransmission behavior and significantly degrade GPU collective communication performance. In an AI backend fabric, RoCEv2 is normally placed in a no-drop QoS class with PFC configured for that traffic class. ECN is commonly used alongside PFC to provide proactive congestion signaling, but PFC is the mechanism that directly prevents loss when buffers approach critical utilization.

Traffic shaping in option A may moderate burst rates but does not establish lossless transport. A high DSCP marking in option C provides classification and forwarding preference, not loss prevention. Weighted fair queuing in option D allocates scheduling bandwidth but also does not guarantee that packets will not be discarded during congestion.

Study Guide Reference: 3.1.a Congestion control mechanisms — PFC, ECN, ETS; 3.1.b RoCE/RoCEv2; 3.1.c QoS.

===============

Cisco Unified Edge directly matches the distributed branch deployment requirements. The Cisco UCS XE9305 chassis contains two Unified Edge Management Controllers, providing redundancy for the chassis management plane. Its XE130c M8 compute node supports up to 768 GB of memory , precisely matching the stated in-memory processing requirement, and supports optional GPU acceleration.

Operationally, Unified Edge is designed for highly distributed sites where qualified IT personnel may not be present. Cisco documents remote server launch with no onsite IT staff, zero-touch provisioning, fleet visibility, and automated lifecycle management through Cisco Intersight. Intersight provides SaaS-based infrastructure lifecycle operations across distributed Unified Edge systems.

Although X-Series Direct is also suitable for remote locations, the exact combination of dual management controllers, 768-GB memory capacity, remote server launch, and Unified Edge's edge-focused lifecycle capabilities uniquely identifies option C. C845A M8 and C240 rack servers provide substantial compute capabilities but do not match the integrated edge chassis and zero-touch operational model required by the scenario.

This is a classic DCAI compute-selection question in which architectural and operational requirements must be evaluated together rather than selecting solely by raw compute performance.

Study Guide Reference: 2.2 Evaluate compute deployment; 2.5 Evaluate hybrid AI deployment with distributed infrastructure.

===============