Spring Sale Limited Time 65% Discount Offer - Ends in 0d 00h 00m 00s - Coupon code: pass65

NCP-MCI-5.20 Nutanix Certified Professional - Multi cloud Infrastructure (NCP-5.20) Questions and Answers

Questions 4

An administrator adds a node with older generation processors to an existing AHV cluster with newer generation processors. What is the effect on live migration?

Options:

A.

Live migration continues to function as expected and VMs can move to any AHV host.

B.

Live migration is prevented until the administrator enables the legacy migration option.

C.

Live migration is prevented until the administrator manually changes the newer processor level.

D.

Live migration of VMs is prevented between newer and older processors.

Buy Now
Questions 5

A system administrator needs to add more VMs to their Nutanix cluster.

Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two)

Options:

A.

Enable Deduplication and Ensure Coding

B.

Utilize Optimize Resources for VM efficiency

C.

Determine utilization with Cluster Runway

D.

Perform an inventory with Life Cycle Management

Buy Now
Questions 6

A customer has a 24-node cluster with all containers configured with RF3. Two different nodes have incurred a simultaneous HDD failure.

What is the result?

Options:

A.

The cluster runs in a degraded state until the failed drives are replaced and the data has been restored to three replicas.

B.

Sixty minutes after the failures a rebuild of the lost data can remaining HDDs begins to restore to three replicas.

C.

The VMs with data on those drives crash, and an HA event occurs, restarting them on a remaining healthy node.

D.

The Nutanix cluster recognizes the failures and immediately begins to rebuild lost data to three replicas.

Buy Now
Questions 7

In which two scenarios is an automated live migration likely to occur? (Choose two)

Options:

A.

Cluster resource hotspot

B.

AOS upgrade

C.

Network upgrade

D.

Hypervisor upgrade

Buy Now
Questions 8

An administrator needs to run a mixed Exchange and SQL workload with a guaranteed amount of container

space for each application.

How should the administrator meet this requirement?

Options:

A.

Create one container and set capacity reservation

B.

Create two containers and reserve space for containers

C.

Create one container and enable compression

D.

Create two containers and reserve space for vDisks

Buy Now
Questions 9

An administrator migrates a VM onto a new Nutanix cluster- After the migration, the administrator observes the following conditions:

• Cluster memory utilization: 64%

• Cluster CPU utilization: 19%

• Cluster storage utilization. 32%

• Average VM CPU utilization: 25%

• Average VM CPU ready%: 24%

• Average VM memory utilization: 60%

Which two changes should the administrator make to improve VM performance? (Choose two.)

Options:

A.

Reduce the number of vCPUs assigned to VMs.

B.

Add more memory to the VMs.

C.

Reduce the number of VMs on the hosts.

D.

Replace high core count CPUs with high clock rate CPUs.

Buy Now
Questions 10

A cluster has RF2. The cluster loses two drives on different nodes in the same storage tier.

What is the effect on the replicas of the VMs?

Options:

A.

Some VM data may be lost

B.

No VMs lose data if the node has two or more SSDs

C.

Some VMs may reboot and gain access to data

D.

No VMs lose data because of RF2

Buy Now
Questions 11

An administrator is configuring cross-hypervisor DR from an ESXi cluster to a new AHV cluster. When the administrator migrates a protection domain to the AHV cluster, the VMs fail to boot.

What should the administrator do to correct this problem?

Options:

A.

Increase the snapshot frequency to more than 6 hours.

B.

Uninstall VMware Tools from the VMs.

C.

Install Nutanix Guest Tools in the protected VMs.

D.

Add all VMs into a single consistency group.

Buy Now
Questions 12

When creating a VM on an AHV cluster, how is the initial placement of the VM determined?

Options:

A.

AHV uses a round robin algorithm, placing new VMs onto hosts based on the numerical order of their UUID

B.

The administrator right clicks on the desired host and selects Power on VM from the dropdown menu

C.

The Acropolis Dynamic Scheduler selects a host which provides adequate resources for the VMs configuration

D.

Placement is determined by the host that holds the new_VM token at the time of VM creation

Buy Now
Questions 13

Refer to the exhibit.

NCP-MCI-5.20 Question 13

The Linux Admin role has been created to manage only Linux VMs in the environment. However, the Admin1 user does not have access to all Linux VMs.

What step should be taken to grant the proper access?

Options:

A.

Add the hosts to the entities KM for the role.

B.

Grant the admin1 user the viewer role (or the cluster.

C.

Add the role to the Linux images.

D.

Add the proper category to each Linux VM.

Buy Now
Questions 14

Refer to the exhibit.

NCP-MCI-5.20 Question 14

System Non-Root Partition Usage shows a warning or critical alert The administrator needs to change the frequency of checks and alerts to respond more quickly.

Where in Prism Element should the administrator change the frequency of checks and alerts?

Options:

A.

Health Dashboard > Manage Crocks > Frequency

B.

Alerts Dashboard > Manage Checks > Schedule

C.

Health Dashboard > Manage Checks > Schedule

D.

Alerts Dashboard > Manage Checks > Frequency

Buy Now
Questions 15

In which two scenarios is Native Key Management Server supported? (Choose two)

Options:

A.

XenServer and AHV mixed cluster.

B.

Hyper-V and AHV mixed cluster.

C.

KVM and AHV mixed cluster.

D.

ESXi and AHV mixed cluster.

Buy Now
Questions 16

A vDisk is read by multiple VMs. The cluster creates immutable copies of the vDisk. What are these vDisk copies called?

Options:

A.

Disk Clones

B.

Golden Images

C.

Volume Groups

D.

Shadow Clones

Buy Now
Questions 17

What is the default network bond setting for an AHV host configuration?

Options:

A.

active-backup

B.

active-active

C.

balance-slb

D.

balance-tcp

Buy Now
Questions 18

Prism Central will be installed manually on an AHV cluster.

Which three disk images must be downloaded from the portal for the Prism Central VM? (Choose three.)

Options:

A.

var

B.

tmp

C.

boot

D.

home

E.

data

Buy Now
Questions 19

The Stargate service becomes unavailable on a single CVM on an AHV node. What is used to maintain I/O operations in the cluster?

Options:

A.

Route injection

B.

iSCSl redirector

C.

Hypervisor HA

D.

ha.py

Buy Now
Questions 20

Which two access protocols are supported by Files? (Choose two.)

Options:

A.

ISCSI

B.

SMB

C.

FCOE

D.

NFS

Buy Now
Questions 21

Async DR is configured between two sites. A network outage occurs at the primary site.

Which steps must the administrator perform to bring the VMs back into service at the backup site?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid procedures using the drop-down option.

NCP-MCI-5.20 Question 21

Options:

Buy Now
Questions 22

An administrator is adding a node with a higher AOS release to an existing cluster.

What is the most efficient action an administrator should take to ensure it is in a supported state?

Options:

A.

Destroy cluster and foundation with the new node in place

B.

Add the node to the cluster and leave the existing AOS version in place

C.

Perform standalone reimage of the new node and then add to cluster

D.

Add the node to the cluster and reboot all running VMs to use new release

Buy Now
Questions 23

An administrator logs in to Prism Element goes to the Network view, and sees the output shown in the exhibit.

NCP-MCI-5.20 Question 23

Which three steps must the administrator take to increase throughput to the host? (Choose three.)

Options:

A.

Connect the 10Gb interfaces to the physical switch.

B.

Change the bond mode to balance-slb or balance—tcp.

C.

Remove any 1Gb interfaces still connected from the default bond.

D.

Add a new switch to the network and connect 1Gb interfaces to it.

E.

Change the VLAN ID to a higher priority ID.

Buy Now
Questions 24

An administrator needs to shut down an AHV cluster to relocate hardware. The administrator upgrades NCC and runs health checks.

Which steps should the administrator perform next?

Item instructions : For each procedure, indicate the order in w hich that procedure must take place to meet the item requirements.

NCP-MCI-5.20 Question 24

Options:

Buy Now
Questions 25

CPU utilization climbs above 90% on several VMs. This causes performance degradation for a business-critical application.

How can alerts be configured to notify the administrator before VM CPU utilization hits 90%?

Options:

A.

On a CVM, use ncli to set the VM CPU Check threshold for the critical VMs to a value below 90%.

B.

On the Health dashboard, locate the VM CPU Check and lower the alert threshold below 90%.

C.

On a CVM, configure a cron job to run the VM CPU Check more frequently and email the result.

D.

On the Alerts dashboard, ensure that the VM CPU usage alert is not set to auto-resolve.

Buy Now
Questions 26

The administrator wants a container to be displayed and limited to 1TB in the hypervisor.

What advanced container setting must the administrator set?

Options:

A.

Advertised Capacity

B.

Reserved Capacity

C.

Advertised Quota

D.

Reserved Quota

Buy Now
Questions 27

An administrator needs to boot a VM to a bootable CD. The administrator tries to configure the VM to boot to it, select to add disk, and goes to the images available. The image for the bootable CD is unavailable.

What is the Likely issue?

Options:

A.

The CD-ROM interface is too slow.

B.

The administrator selected a disk attached before it can boot to a CD.

C.

The VM needs to have a standard disk attached before it can boot to a CD.

D.

The bootable CD image is corrupted during creation.

Buy Now
Questions 28

What is the expected behavior of the VMs residing on that host when a controller VM becomes unavailable?

Options:

A.

A Live Migration will be performed on the affected VMs.

B.

The host will automatically redirect I/O and VMs will continue running.

C.

The impacted host and VMs will automatically shut down.

D.

VM High Availability will restart the impacted VMs on another host

Buy Now
Questions 29

Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the

cluster?

Options:

A.

allssh show_uplinks

B.

manage_ovs show_uplinks

C.

allssh manage_ovs show_uplinks

D.

manage ovs show uplinks

Buy Now
Questions 30

What requires iSCSI initiator configuration in the guest OS to use Volumes?

Options:

A.

SQL Server Always On Availability Group

B.

Microsoft Windows Failover Cluster

C.

Oracle RAC

D.

Exchange DAG

Buy Now
Questions 31

When configuring Prism Central, which two log modules are able to forward messages to an external syslog server? (Choose two.

Options:

A.

API Audit

B.

Flow

C.

DNS

D.

NTP Synchronization

Buy Now
Questions 32

What is the proper sequence to perform a one-click upgrade to a Nutanix cluster?

Item instructions: For each procedure, indicate the order in which that procedure must take place to meet the item requirements. Not all procedures are valid. Identify any invalid pr ocedures using the drop-down option.

NCP-MCI-5.20 Question 32

Options:

Buy Now
Questions 33

Which three configuration scenarios are valid for the deployment of Prism Central? (Choose three.)

Options:

A.

Environments use Network Address Translation.

B.

Prism Elements and Prism Central art in different subnets.

C.

Environments do not have Internet access.

D.

Prism Elements and Prism Central have proxy configured.

E.

Environments use the 192.168.5.0/24 CVM management network.

Buy Now
Questions 34

The customer is seeing high memory utilization on a mission critical VM. Users report that the application is unavailable. The guest OS does not support hot add components.

How should the administrator fix this issue?

Options:

A.

Access the CVM on the host that is running the VM:

*Open acli

*Run a command to increase the amount of RAM assigned to the VM

B.

From the Prism web console:

*Go to the VM dashboard

*Select the VM from the VMs list

*Choose Update

*Adjust the amount of memory assigned to the VM

C.

Go to Control Panel in the VM:

*Select the Computer Properties

*Increase the amount of RAM assigned

D.

During the next maintenance window:

*Select the VM from the VMs list

*Perform a graceful shutdown

Buy Now
Questions 35

An administrator is reviewing performance of a core banking system that routinely has 20,000 concurrent users. During, business hours, the CPU on the applications servers runs at close to 100%. The administrator needs to determine if there is a performance issue specific to the app servers, the database servers, or all servers on the cluster.

NCP-MCI-5.20 Question 35

Which metrics should the administrator review in Prism Analysis Graphs?

Options:

A.

Cluster IO, Network, Database and App Server CPU

B.

Cluster CPU and Memory Only

C.

Cluster IO, CPU, Memory and Database and App Server CPU

D.

Cluster IO, CPU, Memory, Network, App Server CPU

Buy Now
Questions 36

Where are Leap Availability Zones configured?

Options:

A.

Cloud Connect

B.

Controller VM

C.

Prism Element

D.

Prism Central

Buy Now
Questions 37

AHV IPAM assigns an IP address from the address pool when creating a managed VM NIC.

At which two instances does the address release back to the pool? (Choose two)

Options:

A.

The IP address lease expires

B.

The VM NIC is deleted.

C.

The IP address is changed to static.

D.

The VM is deleted.

Buy Now
Questions 38

A configuration is single domain, single forest, and does not use SSL.

Which port number should be used to configure LDAP?

Options:

A.

389

B.

3269

C.

636

D.

3268

Buy Now
Questions 39

Which three cluster operations require an administrator to reclaim licenses?(Choose three)

Options:

A.

Destroy a cluster.

B.

Upgrade a cluster

C.

Migrate a cluster

D.

Remove a Node from a cluster

E.

Move Nodes between clusters.

Buy Now
Questions 40

What is the name of the internal bridge used by AHV nodes and CVMs?

Options:

A.

vnet0

B.

br1

C.

br0

D.

virbr0

Buy Now
Questions 41

An administrator wants to have a VM on an AHV cluster with access to multiple VLANs. What is the most efficient way to achieve this?

Options:

A.

Update a vNIC on the VM to operate in trunked mode for all desired VLANs.

B.

Create a network in AHV associated with all those VLANs on all hosts.

C.

Use SFPs that allow the needed VLANs.

D.

Use one vNIC per VLAN for the VM.

Buy Now
Questions 42

In Files , how many FSVMs are deployed by default?

Options:

A.

1

B.

2

C.

3

D.

5

Buy Now
Questions 43

Which SSL Files required for Importing Key and certificate (Choose 2)

Options:

A.

Public Certificate

B.

Private Certificate

C.

CA Certificate

D.

Private Key

Buy Now
Questions 44

Which two methods should an administrator employ to set up the AHV host VLAN in a cluster to follow Nutanix recommendations? (Choose two)

Options:

A.

Avoid adding guest VMs to the CVM and host VLAN.

B.

Add all VMs to the default VLAN0 on bridge br1.

C.

Add the CVM and the AHV host to the same VLAN.

D.

Add all VMs to a new VLAN other than VLAN 0.

Buy Now
Questions 45

An administrator is preparing to migrate VMs from a legacy ESXi cluster to a new AHV cluster.

Which action must be the administrator perform on the AHV cluster to migrate VM data?

Options:

A.

Install the Nutanix Virt0 drivers

B.

Whitelist the ESXi cluster IP address

C.

Create placeholder VMs

D.

Install Nutanix Self servicing restore.

Buy Now
Questions 46

Which two factors should be considered when planning to migrate VMs to AHV? (Choose two.)

Options:

A.

Guest Operating System

B.

Active Directory Domain

C.

Downtime Requirements

D.

iSCSI MPIO Version

Buy Now
Questions 47

When a VM is restarted on a new host during an HA event, how is the I/O data path impacted?

Options:

A.

All data and I/O associated with the VM are migrated to the new host.

B.

All write I/O occurs on the new host. When reading old data, the I/O is served from the host the VM previously resided on.

C.

All I/O continues to be served from the host the VM previously resided on.

D.

All write I/O occurs on the new host. When reading old data, the I/O may be forwarded by the local CVM to the remote CVM.

Buy Now
Questions 48

An administrator is installing license on a newly created cluster. The cluster is behind a DMZ with no connection to the internet.

Which two steps encompass the connect process to install licenses to the cluster? (Choose two)

Options:

A.

Temporally connect the cluster to the internet and follow process in prism.

B.

Enter the cluster summary file info on a system connected to the internet and download a license file.

C.

Copy the license file to a USB drive and upload to the cluster.

D.

Upload the license file downloaded to the cluster.

Buy Now
Questions 49

An administrator has observed that when an all- AHV host restarts unexpectedly one VM it hosts does not restart as expected.

Which cluster on VM configuration explains this behavior?

Options:

A.

No other all-flash nodes have capacity to host the VM

B.

Nutanix Guest Tools are not installed on the VM

C.

Affinity for the VM is set for only the host that rebooted

D.

VM high availability is not enabled

Buy Now
Questions 50

An administrator wants to view the total IOPs, read & write IOPs on a single graph in prism

Which type of chart on the analysis is capable of allowing this view?

Options:

A.

metric chart

B.

entity chart

C.

performance chart

D.

measurement charts

Buy Now
Questions 51

How does AHV IPAM provide IP addresses to the VMs?

Options:

A.

It runs a DHCP service within each CVM, which responds to DHCP requests from VMs on the local node.

B.

It leverages a plug-in, which enables connection to third-party IPAM solutions to handle DCHP assignments.

C.

It is a centralized DHCP server within Prism Central, which responds to DHCP requests for VMs on managed clusters.

D.

leverages VXLAN and OpenFlow rules to intercept the DHCP request and responds with an address.

Buy Now
Questions 52

Anti-affinity rules have been configured for two VMs on a Nutanix cluster.

What occurs when an administrator manually live-migrates one VM onto the node hosting the second VM?

Options:

A.

The migration fails and an alert is generated in Prism.

B.

The migration fails because the VM-Host affinity needs to be configured.

C.

The migration succeeds and the scheduler migrates one VM off of the node after a period of time.

D.

The migration succeeds and the VMs continue to run on the host until one VM is manua lly migrated.

Buy Now
Questions 53

A Nutanix administrator needs to replace a self-signed SSL certificate with a CA generated certificate in Prism.

Which three files are required to install the CA generated certificate in Prism? (Choose three)

Options:

A.

CA Certificate or Chain (ca_chain_certs.cer)

B.

Public Certificate (PublicCert.ker)

C.

Certificate Signing Request (server.csr)

D.

Private Server Key (private_server.key)

E.

Public Server Key (public_server.key)

Buy Now
Questions 54

Which set of steps should be used to stop the cluster in Nutanix operations?

Options:

A.

1. Shut down Nutanix CVMs and Guest VMs. 2. Log on to a running controller VM in the cluster with SSH. 3. Stop the Nutanix cluster.

B.

1. Shut down Nutanix controller VMs. 2. Log on to a running controller VM in the cluster with SSH. 3. Stop the Nutanix cluster.

C.

1. Shut down all Guest VMs. 2. Log on to a running controller VM in the cluster with SSH. 3. Stop the Nutanix cluster.

D.

1. Log on to a running Controller VM in the cluster with SSH. 2. Shut down all other Controller VMs. 3.Stop the Nutanix clusters.

Buy Now
Questions 55

An administrator is creating a Protection Domain to back up multiple application environments.

Which mechanism does Nutanix use to aggregate VMs with common backup and restore objectives?

Options:

A.

Consistency Groups

B.

Application Pools

C.

Availability Domains

D.

Policy-based Backups

Buy Now
Questions 56

Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the

cluster?

Options:

A.

allssh show_uplinks

B.

manage_ovs show_uplinks

C.

allssh manage_ovs show_uplinks

D.

manage ovs show uplinks

Buy Now
Questions 57

An administrator has a 4-node cluster that cannot experience any downtime. The cluster has 10 TB of total space. Approximately 5 TB of space is currently utilized.

How many nodes can the administrator take offline without impacting workloads on the cluster?

Options:

A.

0

B.

3

C.

1

D.

2

Buy Now
Questions 58

An administrator encounters an error in Prism. After searching through the Nutanix product documentation and knowledge Base the administrator decides to engage Nutanix Support for further assistance.

Which three items will help Nutanix Support to triage and resolve this error most efficiently? (Choose Three)

Options:

A.

Cluster Name

B.

Licensing Information

C.

NCC output

D.

Log Bundle

E.

Detailed Description

Buy Now
Questions 59

Which two levels of encryption are supported in a Nutanix cluster running third-party hypervisor? (Choose two.)

Options:

A.

Node

B.

Cluster

C.

Container

D.

VM

Buy Now
Questions 60

An administrator needs to determine current CPU usage across multiple clusters.

Which method should the administrator use to generate this type of report?

Options:

A.

Prism Central, Explore, Clusters

B.

Prism Central, Home, Manage Dashboards

C.

Prism Central, Home, Add Widgets

D.

Prism Central, Explore, Hosts

Buy Now
Questions 61

the analysis dashboard allows you to create which 2 type of charts? (Choose two)

Options:

A.

entity (vm,host,disk,memory,etc.)

B.

metric (IOPS, sequential reads, etc).

C.

open support cases

D.

out-of-band management

Buy Now
Questions 62

An administrator must make sure that a business critical application experiences consistent I/O latency.

Which feature should the administrator enable to meet this requirement?

Options:

A.

VM-Host Affinity

B.

VM High Availability

C.

VM flash Mode

D.

VM-Host Anti-Affinity

Buy Now
Questions 63

For a single VM, which AHV bond mode would leverage all available uplink bandwidth?

Options:

A.

balance-slb

B.

active-backup

C.

balance-rep

D.

active-active

Buy Now
Questions 64

what does an administrator do before shutdown nutanix node for maintenance in the cluster? (Choose two)

Options:

A.

verify data resiliency status in the cluster

B.

reclaim license

C.

migrate all guests vm from the host

D.

shutdown the cluster in that host

Buy Now
Questions 65

What is the maximum RPO that can be configured for VMs using the Near Sync feature?

Options:

A.

1 min

B.

10

C.

15

D.

60 min

Buy Now
Questions 66

what ahv provides hot spot detection and invokes live migration?

Options:

A.

acropolis dfs

B.

acropolis dynamic scheduler

C.

acropolis data replicator

D.

acropolis management fabric

Buy Now
Questions 67

An administrator needs to provide iSCSI storage to a VM on the nutanix cluster running ESXi

Which native nutanix feature should be leveraged to meet this requirement?

Options:

A.

Acropolis file service

B.

Acropolis Block service

C.

NFS whitelist

D.

Storage Container

Buy Now
Questions 68

An administrator wants to configure Near Sync an AOS 5.15 implementations. The Cluster has the following characteristic

1) 2 nodes at both the primary and remote site

2) 60 TB of storage on each node

3) 1.9 TB SSD disks in each node

4) 8 VMs per protection domain

5) A mix of ESXi and AHV hypervisor

What three steps would need to be taken successfully enable Near Sync? (Choose Three)

Options:

A.

Increase the number of nodes at both sites to a minimum of three

B.

Reduce the amount of storage on each node to more than 40 TB

C.

Reduce the SSD disks type 2 no more than 1 TB

D.

Increase the amount of VMs in each protection domain to at least 10

E.

Use all AHV or all ESXi hypervisor in the implementations

Buy Now
Questions 69

An administrator is trying to create an additional account on the Nutanix cluster in Prism Element but is unable to create new users.

Options:

A.

The OpenLDAP server was temporarily down for maintenance.

B.

The cluster has reached the minimum number of accounts.

C.

The administrator’s account is assigned a Cluster Admin role.

D.

The connection to Active Directory server is disconnected.

Buy Now
Questions 70

What is the default level of Verbosity used when enabling Nutanix Pulse?

Options:

A.

Nothing

B.

Basis

C.

Basis Coredump

D.

Verbose

Buy Now
Questions 71

A Nutanix administrator receives a request from the networking team to start SNMP Traps to their central reporting solution. The administrator creates the transport. The central monitoring tool is not able to clearly read the SNMP traps that are being sent.

What does the administrator need to provide to read SNMP traps correctly?

Options:

A.

Cluster Virtual IP address

B.

SNMP Trap Port

C.

TCP/IP address

D.

Nutanix MIB file.

Buy Now
Questions 72

Which feature must be enabled in order to ensure that VMs are restarted on other hosts in the event of a host failure?

Options:

A.

High Availability

B.

VM Snapshots

C.

Network Segmentation

D.

Live Migration

Buy Now
Questions 73

An administrator has a 4-node Nutanix cluster running on AHV. The administrator creates a new storage container and makes that all available to all hosts.

Which storage protocol is used for Virtual Machines to access virtual disks on the storage container?

Options:

A.

NFS

B.

SMB/CIFS

C.

iSCSI

D.

Fiber Channel

Buy Now
Questions 74

An administrator sets up a protection domain that replicates to a remote site. The administrator must perform DR test every 6 months.

Which snapshot is used when activate is checked on the remote site`s production domain?

Options:

A.

a new snapshot is taken automatically so the original is not modified

B.

the oldest protection domain snapshot at remote site is used

C.

A new snapshot is taken & replicated over the source cluster

D.

the newest protection domain snapshot at the remote site is used

Buy Now
Questions 75

Clusters are configured with an http proxy server an administrator wants to deploy prism central

Which scenario require to the administrator to configure the http proxy whitelist method?

Options:

A.

http port 8000 not open in proxy

B.

ssl port 443 not pen in proxy

C.

http port 80 not open in proxy

D.

ssl port 9440 not open in proxy

Buy Now
Questions 76

Where should an administrator go to check upgrade compatibility between different AOS versions?

Options:

A.

The Upgrade Matrix Page in Life Cycle Management.

B.

The Upgrade compatibility page in life Cycle Management.

C.

The Upgrade Path page in Prism Central.

D.

The Upgrade Paths page on the Support Portal

Buy Now
Questions 77

An administrator wants to configure key based SSH access for an AOS 5.5 Implementation

Which three components can be secured using this method?

Options:

A.

The cluster

B.

the CVM

C.

The hypervisor host

D.

Guest virtual machine

E.

prism element

Buy Now
Questions 78

A node has two SSDs in Slot0 and Slot 1. The SSD in Slot 1 fails.

What is the result?

Options:

A.

The CVM reboots. Other running VMs do not reboot, and the SSD capacity is reduced.

B.

The CVM and other running VMs do not reboot, and the SSD capacity is reduced.

C.

The CVM is down. AHV takes over serving storage to the node, and the SSD capacity is reduced.

D.

The CVM is down. Another CVM takes over serving storage to the node, and the SSD capacity is reduced.

Buy Now
Questions 79

Which options are available when a live migration is performed on a VM in an AOS 5.5 implementation?

Options:

A.

The VM can be moved on a different host

B.

the VM can be moved to a different host and a different storage container

C.

the VM can be moved to a different storage container

D.

the VM can be moved to a different (remote) site

Buy Now
Questions 80

Which feature, if enabled, can simplify licensing operations?

Options:

A.

License Automation

B.

my.nutanix.com

C.

License Bundle

D.

Portal Connection

Buy Now
Questions 81

In an AHV cluster, an administrator needs to enable an application to share a disk b group but needs to enable the VMs to see the volume group.

How should the administrator accomplish this task?

Options:

A.

Create a shared folder for the VMs using Nutanix Files.

B.

Add the volume group to the VM using the update link from the VM dashboard.

C.

Configure a virtual disk on each VM with identical attributes in the storage dashboard.

D.

Add a disk to one VM and enable read/write on it from the other VM.

Buy Now
Questions 82

which cli is used to run this command? (cluster version)

Options:

A.

ecli

B.

bash shell

C.

ncli

D.

acli

Buy Now
Questions 83

In a managed network, in which scenario will AHV use the last net work IP address for the DHCP server?

Options:

A.

When setting a static IP address

B.

When not selecting Override DHCP server

C.

When changing the ClDR range

D.

When deleting the DHCP network

Buy Now
Questions 84

An administrator is restarting a node and the CVM has not automatically restarted.

Which command should be used to start the CVM?

Options:

A.

cvm start cvm_name

B.

virsh start block-ID-(Node Letter)

C.

cvm start block-ID-(Node Letter)

D.

virsh start cvm name

Buy Now
Exam Code: NCP-MCI-5.20
Exam Name: Nutanix Certified Professional - Multi cloud Infrastructure (NCP-5.20)
Last Update: May 8, 2026
Questions: 280

PDF + Testing Engine

$63.52  $181.49

Testing Engine

$50.57  $144.49
buy now NCP-MCI-5.20 testing engine

PDF (Q&A)

$43.57  $124.49
buy now NCP-MCI-5.20 pdf